Radiator fans not spinning at all

brandad_1

After an oil change I realized my coolant began to overheat. When the car is just warming up it’s fine but as soon as my oil temps begin to rise the coolant temperature does too. I just changed my oil and flushed and filled my coolant (both at appropriate levels) and my car was still overheating. Then I ran the ipdm test and realized my fans don’t spin at all. I tested the fan motors and both still work. I tested the relay and it still has continuity with no resistance. The rad fan fuse isn’t blown. I swapped the cooling fan module and it still didn’t fix anything. I’m stumped and I don’t know what else could be the problem. The only thing I could think of is a bad harness but there still seems to be continuity, at least to the black wire that connected to the module. Is there anything else that can be bad that I should check?

THE BULL

Usually one way to tell is if you remove the middle wire from the fan module with the key on fans have to turn on.

On another note I noticed when I did my gallery gaskets that my fans wouldnt turn on. I had evacuated the A/C system and noticed that I was overheating.
I put A/C back on and fan operation returned to normal. I suspect the A/C high pressure switch interacts with the cooling process of the car.