need some friendly advice, after the recent night of tracking and using 5th gear. (Road Atlanta makes use of 5th gear. ) I now have grind/crunch/noise going from 4th to
|
|
LinkBack | Thread Tools | Display Modes |
05-15-2022, 02:53 PM | #1 (permalink) |
A True Z Fanatic
Join Date: Oct 2011
Location: Knoxville
Age: 71
Posts: 3,190
Drives: 12 370Z BK Cherry M6
Rep Power: 649540 |
shift problem - crunch into 5th gear
need some friendly advice, after the recent night of tracking and using 5th gear. (Road Atlanta makes use of 5th gear. )
I now have grind/crunch/noise going from 4th to 5th, or 6th to 5th. recently had the transmission fluid changed to Redline MT-85. Also looking for a new short throw shifter, the Stillen, gets loose, (its not a solid piece of metal, uses a bushing) So options Transmission -- Take to dealership and see what they say -- any others.. Options for short throw shifter for now - Torque Solution Short Throe Shifter - B&M Presision Manual Sportshifter - Coolerworx Short shifter - looks good, not sure if it can be found in USA - TWM Performance shifter - no longer made.. - still looking Thanks for the help
__________________
Lots of Changes the Z needs to be driven and driven hard for the car lives for it |
05-15-2022, 03:11 PM | #2 (permalink) |
A True Z Fanatic
Join Date: Nov 2009
Location: Western Maryland
Posts: 1,280
Drives: Wife crazy & 09 370Z
Rep Power: 105454 |
The synchros in the OEM manual trans are crap. They are known for grinding in to gear when power shifting. Only 6th gear grinds on my Z (for now). I can power through 1st through 5th with no issues, but if I want to avoid grinding in to 6th, I need to push the clutch all the way down, wait a second and then shift in to 6th. I took it to a reputable place in Maryland a few years ago and they recommended replacing the trans with a new one. That seems to be the general consensus with this issue. Or at least it was back then.
As far as shifters go, I installed a B&M short throw about 10 years ago and haven't looked back. It works well, was easy to install and I've never had any issues with it. Sent from my SM-G781U using Tapatalk
__________________
~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on... |
05-16-2022, 12:02 AM | #3 (permalink) | |
A True Z Fanatic
Join Date: Jun 2014
Location: Ga
Posts: 13,803
Drives: 2013 Nismo 370z
Rep Power: 2684392 |
Quote:
Change the fluid to GL-4 75w90 and see how it does. Nissan trans do not like a straight 80w or 85wt transmission oil. |
|
05-16-2022, 12:55 AM | #4 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,190
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
Mine has always ground going from 6th to 5th if I rush it. Different gear lubes haven't help. Plus I have the TWM shifter.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
05-16-2022, 10:18 AM | #6 (permalink) |
Enthusiast Member
Join Date: May 2018
Location: Rhode Island
Posts: 478
Drives: '09 370Z, '03 G35
Rep Power: 14419 |
I always get crunch from 4-5 when the trans is cold if I shift too quickly. Crunch is mostly gone when the trans is warmed up. A granny shift into 5th for the first few minutes of driving is all I need to do to avoid the crunch.
Using MT-85
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes |
05-16-2022, 10:56 AM | #9 (permalink) | |
Enthusiast Member
Join Date: May 2018
Location: Rhode Island
Posts: 478
Drives: '09 370Z, '03 G35
Rep Power: 14419 |
Quote:
Redline MT85 is actually 75W85 oil. The naming convention is a bit misleading Sent from my iPhone using Tapatalk
__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes |
|
05-16-2022, 02:02 PM | #11 (permalink) |
A True Z Fanatic
Join Date: Oct 2011
Location: Knoxville
Age: 71
Posts: 3,190
Drives: 12 370Z BK Cherry M6
Rep Power: 649540 |
Thanks all, very interesting stuff...
Not sure what to do, might try the AMSOIL Manual Transmission & Transaxle Gear Lube 75W-90 But it appears it might not need a new transmission, hmmm... On the list is to check the fluid level and see..... I guess the other question is how much does this affect Track Days, now I do Atlanta Motorsport Park (AMP) and Road Atlanta (RA). AMP - never get into 5ht. RA -- all the time
__________________
Lots of Changes the Z needs to be driven and driven hard for the car lives for it |
05-16-2022, 02:19 PM | #12 (permalink) | |
A True Z Fanatic
Join Date: Oct 2011
Location: Knoxville
Age: 71
Posts: 3,190
Drives: 12 370Z BK Cherry M6
Rep Power: 649540 |
Quote:
__________________
Lots of Changes the Z needs to be driven and driven hard for the car lives for it |
|
05-16-2022, 02:39 PM | #13 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,190
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
Didn't help.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
05-17-2022, 06:20 AM | #14 (permalink) |
A True Z Fanatic
Join Date: Mar 2011
Location: NJ
Posts: 2,401
Drives: slowly
Rep Power: 40569 |
Yeah the 5th gear synchros are the worst/weakest. Try changing the fluid but budget for a replacement sooner rather then later. After a track lap where I was pushing pretty hard for a good lap time and didn't wait for the synchro and forced it, the whole 5th synchro was destroyed and I had to limp home with it jammed in 5th. Ended up just replacing the whole transmission rather then figuring what was damaged and what wasn't and rebuilding and just being more mindful of the gearbox limitations.
__________________
GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs |
05-17-2022, 12:48 PM | #15 (permalink) | |
A True Z Fanatic
Join Date: Oct 2011
Location: Knoxville
Age: 71
Posts: 3,190
Drives: 12 370Z BK Cherry M6
Rep Power: 649540 |
Quote:
Funny thing I do not remember anything that felt odd, no indication that it happened. Like I said, went to come back to TN and bam, what is going on... Still when I take it out, I wish some overnight would fix it... Thanks for the help
__________________
Lots of Changes the Z needs to be driven and driven hard for the car lives for it |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fifth gear problem | Fili | Engine & Drivetrain | 2 | 05-23-2020 05:23 AM |
Manual Transmission 2nd gear problem | Mal | Australia/New Zealand | 4 | 06-05-2012 11:42 AM |
Gear grind sound 7AT?? Transmission problem? help! | Cafiax | Engine & Drivetrain | 9 | 12-19-2011 06:02 AM |
is it ok to shift into 2nd gear while going 60+mph? | BlackCherryZ | Nissan 370Z General Discussions | 34 | 03-19-2010 08:59 PM |
weird 6th gear problem | corbin09 | Engine & Drivetrain | 19 | 07-12-2009 05:34 PM |