2011 GTM supercharger Nismo forged engine build

fryzia23 · 04-09-2022, 09:47 AM

Finally started my new engine build after I blew my original exactly a year ago at the track. It took so long because had to build my garage first to accommodate the build and on top of everything the delays on parts are through the roof. Last weekend I got my block from machine shop, got the piston rings grinded to spec by my buddy who is experienced engine builder. The rest is on me. Yesterday I installed the crank in and started to prep the rods and pistons.
Parts list:

11.1CR 96mm wiseco pistons with armor coating
BC connecting rods with arp 625+ fasteners
King standard size coated race bearings for mains and rods
ARP main studs,
ARP L19 head studs
Cometic head gaskets
JWT C2 cams
CZP oil gallery gaskets with updated hardware
GTR spark plugs
Ati super damper
Shorty z1 headers with de test pipes
Boundary engineering oil pump with 2 shim option
Engine mods already on that car are GTM stage 1.5 supercharger kit 88mm pulley and fast intentions exhaust but will run 84mm pulley to compensate for smaller ATI crank pulley
Radium surge tank with 340 aem fuel pump
Coolerworx shifter
RPM roll bar

Will be tuned on 100octane. Currently have 660 injectors and 250 walbro fuel pump. My tuner said to install 1050 injectors and 340 aeromotive pump. Didn’t say anything about fuel return system but I might just throw it in there so I won’t have fuel delivery issues.

fryzia23 · 04-09-2022, 09:52 AM

The lift I installed and workshop space addition

ZontheRocks · 04-09-2022, 05:47 PM

Sounds like a plan! Looks like a great place to put in work!

fryzia23 · 04-09-2022, 08:28 PM

Got the pistons in today. On of the issues with main stud kit is that the windage tray will have to be modified to fit around the studs.

Jinxx · 04-09-2022, 10:15 PM

Are you planning to upgrade to the c38r rotrex supercharger ? ….the c38 that comes with the stage 1.5 and stage 2 gtm kits will max out around 9-10 ish lbs boost with the 88mm pulley. I ran a 85mm pulley and was 12 lbs. wouldn’t really be pushing a built motor much.

fryzia23 · 04-10-2022, 09:24 AM

For now I’m going to stick with what I got but once current supercharger unit gives up, the plan is to go with c38r. Car will be dedicated track car so with current power levels is plenty fast. My main concern is to make sure engine runs well and it’s reliable.

fryzia23 · 04-10-2022, 09:32 AM

So turns out I made rookie mistake. The instructions that came with pistons don’t mention anything or at least I didn’t see it which direction the pistons go. The dot on top of piston indicates the front of engine. Good thing only one pair faces wrong directions, #2 and #5 will have to be swapped.

fryzia23 · 05-03-2022, 01:39 PM

Basically long block is assembled. Just left is the VVEL control solenoid and lower oil pan as its still on the blown engine. JWT valve spring compressor is well worth the money. Now need to push the car back into the garage and remove engine/trans assembly and start swapping everything over.

fryzia23 · 05-16-2022, 06:42 PM

started engine removal. Getting closer to swap. Working on it as the time allows. Weekends been busy. Since Covid backed everything up it seems every other weekend there’s some kind of party going on 🤦*♂️ Ruins my plans to keep working on the car. ATI super damper still didn’t arrive. Last thing I’m waiting on.

fryzia23 · 05-16-2022, 06:45 PM

Does anyone knows the torque spec of jwt camshaft bolt? The highlighted part in green on the photo washed out and can’t tell what it says. It is the same as oem exhaust sprocket bolt?

ihaveashihtzu · 05-16-2022, 09:21 PM

Quote:

Originally Posted by fryzia23

Does anyone knows the torque spec of jwt camshaft bolt? The highlighted part in green on the photo washed out and can’t tell what it says. It is the same as oem exhaust sprocket bolt?

Jim Wolf Technology website

fryzia23 · 05-16-2022, 09:24 PM

Quote:

Originally Posted by ihaveashihtzu

Jim Wolf Technology website

Ahh man I was at their website trying to find it but gave up. And I actually did torque it to 76ftlbs just as the intake side but now I can be sure of proper spec . Thanks!

fryzia23 · 05-31-2022, 10:44 AM

Matched new belt without ac compressor. Engine is basically ready to go up but still waiting on ATI super damper crank pulley. Original shipping date was May 1st and updated date is May 31st so hopefully will be shipping this week.
Also ordered radium surge tank and coolerworx shifter.

fryzia23 · 06-06-2022, 05:21 PM

More goodies came in today

SG4247 · 06-06-2022, 07:13 PM

Just a note.. but,

my JWT cam lobes would strike the ladder in a couple places.

My heads are off a 2010 MY so not sure what yours are - or even if they are affected.

Better to know and check now, vs later.

04-09-2022, 05:47 PM	#3 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 958 Drives: 2016 Nissan PW 370Z Rep Power: 34535	Sounds like a plan! Looks like a great place to put in work! fryzia23 and Hotrodz like this. __________________ '16 Pearl White Sport \| Stillen Gen. 3 \| Motordyne ART \| Motordyne Shockwave \| ZSpeed \| Powertrix \| EVO-R \| Aeroworkz \| Nismo \| Z1 \| EcuTek \| Tuned by Seb @ SpecialtyZ

04-10-2022, 09:24 AM	#6 (permalink)
fryzia23 Enthusiast Member Join Date: Dec 2010 Location: new jersey Posts: 452 Drives: 2011 MB 370Z NISMO Rep Power: 1245	For now I’m going to stick with what I got but once current supercharger unit gives up, the plan is to go with c38r. Car will be dedicated track car so with current power levels is plenty fast. My main concern is to make sure engine runs well and it’s reliable. Jinxx likes this.

04-10-2022, 09:32 AM	#7 (permalink)
fryzia23 Enthusiast Member Join Date: Dec 2010 Location: new jersey Posts: 452 Drives: 2011 MB 370Z NISMO Rep Power: 1245	So turns out I made rookie mistake. The instructions that came with pistons don’t mention anything or at least I didn’t see it which direction the pistons go. The dot on top of piston indicates the front of engine. Good thing only one pair faces wrong directions, #2 and #5 will have to be swapped. BettyZ likes this.

06-06-2022, 07:13 PM	#15 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	Just a note.. but, my JWT cam lobes would strike the ladder in a couple places. My heads are off a 2010 MY so not sure what yours are - or even if they are affected. Better to know and check now, vs later. fryzia23 likes this. __________________ NA on E85 - 12.402 @ 112 mph 100 shot E85 - 11.589 @ 117 mph JWT C2 cams rev Base Circle & Titan Valves Last edited by SG4247; 06-06-2022 at 07:16 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VQ37 Engine Best VIN \| Engine build for TT	NissanTracker	Engine & Drivetrain	18	10-01-2020 02:15 PM
Another Supercharger Build in the Works	V8Killer	Forced Induction	30	06-25-2020 11:46 AM
GTM Stage 1.5 supercharger build	snowsurfdirtx	Forced Induction	197	05-07-2017 07:04 AM
Password:JDM 2011 370Z Nismo #170 Build Thread	PasswordJDM	Member's 370Z Gallery	31	11-24-2011 06:32 PM
Forged Performance: 2011 STi Sedan MONSTER Build check back often	Tray@Forged	Other Vehicles	107	11-14-2011 09:02 AM

04-09-2022, 10:15 PM	#5 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3375	Are you planning to upgrade to the c38r rotrex supercharger ? ….the c38 that comes with the stage 1.5 and stage 2 gtm kits will max out around 9-10 ish lbs boost with the 88mm pulley. I ran a 85mm pulley and was 12 lbs. wouldn’t really be pushing a built motor much.