![]() |
How much damage would I have done if I just discovered that there might have been a small vacuum leak where the PCV hose connects to the intake large side
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#1 (permalink) |
Base Member
Join Date: Jul 2021
Location: .
Posts: 52
Drives: .
Rep Power: 6714 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
How much damage would I have done if I just discovered that there might have been a small vacuum leak where the PCV hose connects to the intake large side nipple?
I have stillen gen 3's installed and for those nipples I just tossed on some rubber hoses with no clamps to the Stillen nipples, so the hose was just resting on the nipple loosely with enough room for unfiltered and unmetered (this is after the MAF sensor) air to get into. It's been like this for the past half year at least. How much damage could I have done to my engine with possible lean conditions due to intake vacuum leak? I don't race but I do run it hard here and there. |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
'12 G37 with Brake Booster Vacuum Leak | Dentt42 | Brakes & Suspension | 7 | 11-25-2019 11:27 AM |
exhaust or vacuum leak | GuiLLoZ | Intake/Exhaust | 2 | 12-14-2018 04:05 PM |
Running too lean? | Paskii | Intake/Exhaust | 21 | 04-11-2012 01:17 PM |
CBE=lean running.? | Chan Chee Hoe | Intake/Exhaust | 3 | 10-14-2010 10:27 AM |
Running too lean? | G37Sam | Tuning | 21 | 06-01-2010 10:25 AM |