Low Oil Pressure

JARblue · 10-18-2021, 03:31 PM

Here's what mine looked like

DIY: 370z Oil Galley

Ben370 · 10-18-2021, 04:10 PM

Quote:

Originally Posted by JARblue

Here's what mine looked like

DIY: 370z Oil Galley

Yikes hopefully mine isn't as bad as that. Those guys were making it sound like your engine was gonna blow even after the gasket change. As long as there's no metal pieces in the oil, I'm pretty sure we should be good for while.

Tractionless · 10-29-2021, 09:41 AM

Get the galley gaskets in yet? Interested in what the new pressure is.

Ben370 · 10-30-2021, 06:53 PM

Quote:

Originally Posted by Tractionless

Get the galley gaskets in yet? Interested in what the new pressure is.

I ordered the EPS gaskets and OEM timing kit from Z1 on Tuesday. Z1 delivery got pushed from Monday to Wednesday and looks like EPS hasn't even shipped yet.
Asked EPS for an update. Might cancel and overnight it from Nisformance

Tractionless · 11-08-2021, 08:19 AM

Quote:

Originally Posted by Ben370

I ordered the EPS gaskets and OEM timing kit from Z1 on Tuesday. Z1 delivery got pushed from Monday to Wednesday and looks like EPS hasn't even shipped yet.
Asked EPS for an update. Might cancel and overnight it from Nisformance

Thanks please update the thread with your final results.

Ben370 · 11-09-2021, 06:34 PM

Gaskets were blown as expected. I was too busy to make it to the shop for pics though. Timing chains were nice and tight but it was open anyway so I had them pull rocker covers and plenum to do all 3, bringing my labor cost from 1700 to 2400. Should be done tomorrow.

Edit: mechanic took a pic and part of the bigger gasket was broken and you could see the brown marks where it was seeping through.

10-18-2021, 03:31 PM	#16 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Here's what mine looked like DIY: 370z Oil Galley __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

10-29-2021, 09:41 AM	#18 (permalink)
Tractionless A True Z Fanatic Join Date: Jan 2016 Location: Atlantic SE Posts: 1,326 Drives: '10 K23 ST 7AT Rep Power: 30525	Get the galley gaskets in yet? Interested in what the new pressure is. Rusty likes this. __________________ Toys Not Tots

11-09-2021, 06:34 PM	#21 (permalink)
Ben370 Base Member Join Date: Mar 2016 Location: Virginia Posts: 72 Drives: [SOLD] 09 Tour/Sport Rep Power: 3364	Gaskets were blown as expected. I was too busy to make it to the shop for pics though. Timing chains were nice and tight but it was open anyway so I had them pull rocker covers and plenum to do all 3, bringing my labor cost from 1700 to 2400. Should be done tomorrow. Edit: mechanic took a pic and part of the bigger gasket was broken and you could see the brown marks where it was seeping through. Rusty and old guy like this. Last edited by Ben370; 11-11-2021 at 05:56 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Oil Pressure Gauge	spearfish25	DIY Section (Do-It-Yourself)	141	11-12-2024 06:07 PM
Low oil pressure!	jmroy6	Forced Induction	47	11-16-2021 10:01 AM
Oil pressure	thavent	Engine & Drivetrain	18	06-02-2020 07:36 PM
Zero oil pressure	bimbimbop	Forced Induction	9	11-01-2017 12:36 AM
Tire Pressure which one...	Nismoracer	Wheels & Tires	15	04-12-2011 08:04 AM