Csc and Master Cylinder

Hawaiian370z · 07-16-2021, 12:35 PM

Starting having issue with my clutch. Notice that the fluid in the reservoir was getting low. Clutch pedal feels soft and starting to stick to the ground. Reading some tread I’m assuming it’s the SCS or Master cylinder.

Anyone have a idea of what the dealership normally charge to repair?

BettyZ · 07-16-2021, 01:01 PM

An arm and a leg. You have to drop the trans. Do yourself a favor and buy a ZSpeed CMAK kit. You'll never have to worry about the issue again.

JARblue · 07-16-2021, 01:04 PM

Expect at least $700-1000 in labor depending on your local rates. Add another few hundred for parts. Don't use a dealer unless they'll install an aftermarket slave solution for you. ZSpeed CMAK highly recommended.

Hawaiian370z · 07-16-2021, 05:11 PM

Thanks for the advice guys.

Dealership wanted to charge me 1800 for parts and labor.

I was told Zspeed CMAK are held up and not shipping kits till the end of the month.

Anyone have any experience with CZP HRK Hydraulics Relocation Kit?

madwi · 07-16-2021, 05:33 PM

Quote:

Originally Posted by Hawaiian370z

Thanks for the advice guys.

Dealership wanted to charge me 1800 for parts and labor.

I was told Zspeed CMAK are held up and not shipping kits till the end of the month.

Anyone have any experience with CZP HRK Hydraulics Relocation Kit?

Hit up the for sale section! Eastwest has a brand new one for $100 off new price. He is a great guy to buy from and a good irl friend.
New ZSPEED Stage 2 Clutch/Flywheel/CMAK/CMC

eastwest2300 · 07-16-2021, 05:45 PM

Quote:

Originally Posted by madwi

Hit up the for sale section! Eastwest has a brand new one for $100 off new price. He is a great guy to buy from and a good irl friend.
New ZSPEED Stage 2 Clutch/Flywheel/CMAK/CMC

thanks brother.

Hawaiian370z · 07-16-2021, 06:07 PM

Quote:

Originally Posted by madwi

Hit up the for sale section! Eastwest has a brand new one for $100 off new price. He is a great guy to buy from and a good irl friend.
New ZSPEED Stage 2 Clutch/Flywheel/CMAK/CMC

I did not see that. I will be definitely hitting him up on that. Thanks!

eastwest2300 · 07-16-2021, 06:34 PM

pm received from op, pm replied, informing potential buyer that cmc needs to be replaced alongside the csc.. I'll also throw in the rubber grommet from zspeed that seals the bell housing for free.

im not sure if OP is interested in upgrading his clutch/flywheel too while the transmission is open..

eastwest2300 · 07-16-2021, 10:32 PM

CMAK & CMC w/ rubber grommet sold to OP, will have everything shipped by 10am tomorrow morning, thanks OP!

eastwest2300 · 07-17-2021, 08:22 PM

items shipped out this morning, headed to Phoenix! enjoy your parts sir.. they are 100% brand spanking new..

eastwest2300 · 07-23-2021, 12:57 PM

Buyer just received his parts.

07-16-2021, 12:35 PM	#1 (permalink)
Hawaiian370z Base Member Join Date: Feb 2020 Location: Arizona Posts: 9 Drives: 2010 370Z MB 6MT Rep Power: 6	Csc and Master Cylinder Starting having issue with my clutch. Notice that the fluid in the reservoir was getting low. Clutch pedal feels soft and starting to stick to the ground. Reading some tread I’m assuming it’s the SCS or Master cylinder. Anyone have a idea of what the dealership normally charge to repair?

07-16-2021, 01:01 PM	#2 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	An arm and a leg. You have to drop the trans. Do yourself a favor and buy a ZSpeed CMAK kit. You'll never have to worry about the issue again. JARblue, danegrey, Rusty and 4 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

07-16-2021, 01:04 PM	#3 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Expect at least $700-1000 in labor depending on your local rates. Add another few hundred for parts. Don't use a dealer unless they'll install an aftermarket slave solution for you. ZSpeed CMAK highly recommended. Rusty, axmea?, Hotrodz and 4 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-16-2021, 06:34 PM	#8 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,019 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684551	pm received from op, pm replied, informing potential buyer that cmc needs to be replaced alongside the csc.. I'll also throw in the rubber grommet from zspeed that seals the bell housing for free. im not sure if OP is interested in upgrading his clutch/flywheel too while the transmission is open.. Rusty and madwi like this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium Last edited by eastwest2300; 07-16-2021 at 07:31 PM.

07-16-2021, 10:32 PM	#9 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,019 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684551	CMAK & CMC w/ rubber grommet sold to OP, will have everything shipped by 10am tomorrow morning, thanks OP! __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

07-16-2021, 05:11 PM	#4 (permalink)
Hawaiian370z Base Member Join Date: Feb 2020 Location: Arizona Posts: 9 Drives: 2010 370Z MB 6MT Rep Power: 6	Thanks for the advice guys. Dealership wanted to charge me 1800 for parts and labor. I was told Zspeed CMAK are held up and not shipping kits till the end of the month. Anyone have any experience with CZP HRK Hydraulics Relocation Kit?

07-17-2021, 08:22 PM	#10 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,019 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684551	items shipped out this morning, headed to Phoenix! enjoy your parts sir.. they are 100% brand spanking new.. JARblue, gomer_110 and madwi like this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

07-23-2021, 12:57 PM	#11 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,019 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684551	Buyer just received his parts. Hawaiian370z likes this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] RJM Pedal Rev3.3, Tilton HD Master Cylinder, JWT HD Clutch Slave Cylinder ALMOST NEW	CyFi6	Parts for sale (Private Classifieds)	6	12-23-2020 02:55 PM
Replacing Clutch master cylinder and Slave cylinder?	s2krazyyy	Engine & Drivetrain	5	01-20-2018 01:03 PM
[WTB] Master cylinder	Whitel	Parts for sale (Private Classifieds)	9	09-08-2017 12:32 PM
Bad Master Cylinder?	ARrado15	Engine & Drivetrain	6	04-17-2016 04:30 AM
Master cylinder	Elmo370z	Engine & Drivetrain	4	01-05-2015 01:21 PM