CEL and no acceleration

Rusty · 07-19-2021, 04:09 PM

Quote:

Originally Posted by NissanZ34

Understood. I will go ahead and unplug the battery for a day or two. I am reaching out everywhere and to anybody right now and I'm looking for support and guidance. Unfortunately the tuner appears to be unavailable.

Disconnect the battery. Step on the brake pedal. This will relieve any current in the electrical system that maybe present. Reconnect the battery. If you have an Ecutek or UpRev tune. Disconnecting the battery won't affect the tune. What will affect the tune is if the dealer reflashed the ECU with the tune still in it. Then the tune is toast. Sometimes removing the tune and then reinstalling it will help. If not, see your tuner.

NissanZ34 · 07-19-2021, 06:20 PM

Called the tuner and he said the problem is the o2 sensors. He would reflash the car to have EcuTek ignore the o2 sensor reading. He wants to charge me for that.

JARblue · 07-19-2021, 06:48 PM

Sounds like a greedy tuner to me. Most of the good tuners would not have any problems making the quick change to turn off those sensors without additional cost.

NissanZ34 · 07-19-2021, 07:44 PM

Quote:

Originally Posted by JARblue

Sounds like a greedy tuner to me. Most of the good tuners would not have any problems making the quick change to turn off those sensors without additional cost.

I agree it's ******** to have to pay to fix something that should not have occurred in the first place.

Could another tuner use data logging and the current tune to send me a flawless tune through email?

redondoaveb · 07-19-2021, 08:14 PM

Quote:

Originally Posted by NissanZ34

I agree it's ******** to have to pay to fix something that should not have occurred in the first place.

Could another tuner use data logging and the current tune to send me a flawless tune through email?

You'd have to send them your tune and hopefully your tuner didn't lock his tune. Are you on Facebook? Contact Eugene Turkov. Here's his phone number. (415) 830-4008 He'll answer until 10:00pm pst. He's in California

NissanZ34 · 07-19-2021, 08:17 PM

Quote:

Originally Posted by redondoaveb

You'd have to send them your tune and hopefully your tuner didn't lock his tune. Are you on Facebook? Contact Eugene Turkov

Then it won't be possible since he tuned the car on the dyno and flashed it there. Again, could another tuner use data logging on an already tuned for my current mods car to speed up the creation of another tune?

redondoaveb · 07-19-2021, 08:20 PM

Quote:

Originally Posted by NissanZ34

Then it won't be possible since he tuned the car on the dyno and flashed it there. Again, could another tuner use data logging on an already tuned for my current mods car to speed up the creation of another tune?

I added the name and phone number to a tuner in my above post. Give Eugene a call. If anyone can help you, he can.

NissanZ34 · 07-23-2021, 08:30 PM

Went to the dealership and the technician verified the harness and it's working. o2 sensor wiring is good too, but the problem may be the o2 sensors themselves (both of them). That or it could be a damaged ECU or a flawed tune. Remind you the tunner wanted to deactivate o2 sensor reading to bypass the issue. Could my problem really be two broken o2 sensors? The technician told me it's very unusual to have both o2 sensor break at the same time.

As for testing the car after the dealership appointment, on cold start temperature the power was back but as soon as the engine gained some temperature it got slow again. I also got the service engine light soon flashing for a brief moment when trying to get to max rpm in 4th gear. The light disappeared as soon as I let off throttle. The technician told me the computer does not read o2 sensor data when the engine is cold but will do once it gets warmer. I think I also got in limp mode because I could barely get to 3000 rpm at one point.

So do you guys think the problem really is the o2 sensors? Dealer will happily sell me OEM sensors but will not accept any return on electronic parts so I must be certain otherwise I'll be stuck with them.

redondoaveb · 07-23-2021, 08:35 PM

I assume you didn't call the tuner I recommended in my above post?

NissanZ34 · 07-23-2021, 08:50 PM

Quote:

Originally Posted by redondoaveb

I assume you didn't call the tuner I recommended in my above post?

I just contacted him on FB now. I wanted to have more troubleshooting done at first to eliminate common faults before contacting a tuner to help me figure it out even further.

redondoaveb · 07-23-2021, 09:02 PM

Quote:

Originally Posted by NissanZ34

I just contacted him on FB now. I wanted to have more troubleshooting done at first to eliminate common faults before contacting a tuner to help me figure it out even further.

The good thing about him is he'll help you troubleshoot

NissanZ34 · 07-23-2021, 09:07 PM

Quote:

Originally Posted by redondoaveb

The good thing about him is he'll help you troubleshoot

Yes he does want to help me! I just talked to him and he thinks the problem is more than likely in the tune. He would check out my data logs and even send me a stock tune file. Thank you for recommending me Eugene Turkov, he really seems like a nice guy. I think I'm in good hands now.

Rusty · 07-23-2021, 09:08 PM

Remove the tune and see if the problem is still there.

Do you have test pipes?

NissanZ34 · 07-23-2021, 09:16 PM

Quote:

Originally Posted by Rusty

Remove the tune and see if the problem is still there.

Do you have test pipes?

That's what Eugene suggested actually. I have high flow cats, catback and Z1 intakes.

Rusty · 07-23-2021, 09:27 PM

Quote:

Originally Posted by NissanZ34

That's what Eugene suggested actually. I have high flow cats, catback and Z1 intakes.

The O2 sensor could have gotten damaged during the install of the cats. A lot of times, if a impact gun was used on the bolts before removing the sensors. The vibrations from the gun will kill the sensors. A lot of people on here have had that issue.

07-19-2021, 06:48 PM	#18 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Sounds like a greedy tuner to me. Most of the good tuners would not have any problems making the quick change to turn off those sensors without additional cost. Rusty and redondoaveb like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-23-2021, 08:35 PM	#24 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,366 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	I assume you didn't call the tuner I recommended in my above post? __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

07-23-2021, 09:08 PM	#28 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,220 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Remove the tune and see if the problem is still there. Do you have test pipes? redondoaveb likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No acceleration	Vincenzo	Tuning	0	05-12-2021 10:56 PM
No acceleration	Mal370z	Engine & Drivetrain	2	10-08-2020 08:03 PM
Z bucks on acceleration	Va_gunguy	Brakes & Suspension	8	01-18-2016 10:42 PM
Help, very little acceleration when I hit the gas??	2013nismo	Engine & Drivetrain	8	03-23-2015 10:51 AM
Acceleration Videos	DonWolfo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	4	03-04-2009 01:09 PM

07-19-2021, 06:20 PM	#17 (permalink)
NissanZ34 Base Member Join Date: Jun 2019 Location: Canada Posts: 92 Drives: 2010 370z 6MT Rep Power: 6	Called the tuner and he said the problem is the o2 sensors. He would reflash the car to have EcuTek ignore the o2 sensor reading. He wants to charge me for that.

07-23-2021, 08:30 PM	#23 (permalink)
NissanZ34 Base Member Join Date: Jun 2019 Location: Canada Posts: 92 Drives: 2010 370z 6MT Rep Power: 6	Went to the dealership and the technician verified the harness and it's working. o2 sensor wiring is good too, but the problem may be the o2 sensors themselves (both of them). That or it could be a damaged ECU or a flawed tune. Remind you the tunner wanted to deactivate o2 sensor reading to bypass the issue. Could my problem really be two broken o2 sensors? The technician told me it's very unusual to have both o2 sensor break at the same time. As for testing the car after the dealership appointment, on cold start temperature the power was back but as soon as the engine gained some temperature it got slow again. I also got the service engine light soon flashing for a brief moment when trying to get to max rpm in 4th gear. The light disappeared as soon as I let off throttle. The technician told me the computer does not read o2 sensor data when the engine is cold but will do once it gets warmer. I think I also got in limp mode because I could barely get to 3000 rpm at one point. So do you guys think the problem really is the o2 sensors? Dealer will happily sell me OEM sensors but will not accept any return on electronic parts so I must be certain otherwise I'll be stuck with them.