YAW sensor bypass in a 2013+?
 

Hi everyone. I recently purchased coils, an oil cooler (and I am looking into getting an LSD). I love putting the car sideways but the base open diff is not very helpful.
My question is in terms of the DIY bypass switch, has anyone with a 2014 or up model done it? I've heard that it may not work and I want some advice before I go cutting wires all over the car.
Thanks in advance.

It's only one wire that you have to splice a switch into. Don't know if they changed the color code for the wire you need to cut for that year.

Get a good LSD if you're getting one. Don't get the VLSD from the sport or Nismo.

On my 2014 Nismo it was the green wire if I remember correctly

Awesome, thanks guys!

You can locate and disconnect the YAW once you find it and test it disconnected prior to cutting any wires.

Do some proper research prior to cutting and proceed at your own risk. Get some seat time as they love inexperienced drivers :tup:

Yes, the green wire.
 

It's under the cup holder dead center of the car. Right under the center console.

Good luck.

I did mine a year or so ago