Fuel injector testing and cleaning

redondoaveb · 05-06-2021, 06:38 PM

Well, that's not good

Hotrodz · 05-06-2021, 06:42 PM

Well it looks like you are good to go after cleaning.

Sent from my SM-G965U using Tapatalk

redondoaveb · 05-06-2021, 06:49 PM

Quote:

Originally Posted by Hotrodz

Well it looks like you are good to go after cleaning.

Sent from my SM-G965U using Tapatalk

Sure are. Since I don't know crap about fuel injectors, I wonder if those low flow rates contributed to my motor blowing? And, I wonder why injector #4 was wide open? Was it stuck wide open?

Hotrodz · 05-06-2021, 07:13 PM

Quote:

Originally Posted by redondoaveb

Sure are. Since I don't know crap about fuel injectors, I wonder if those low flow rates contributed to my motor blowing? And, I wonder why injector #4 was wide open? Was it stuck wide open?

That was my first thought as well!

Sent from my SM-G965U using Tapatalk

redondoaveb · 05-06-2021, 07:20 PM

Quote:

Originally Posted by Hotrodz

That was my first thought as well!

Sent from my SM-G965U using Tapatalk

That wasn't a lot of miles either. Pump e85 is hard on injectors. I guess I'm going to need to run a tank of pump gas through it more often

Hotrodz · 05-06-2021, 07:53 PM

Quote:

Originally Posted by redondoaveb

That wasn't a lot of miles either. Pump e85 is hard on injectors. I guess I'm going to need to run a tank of pump gas through it more often

Yep, pump e85 can be rough on injectors and fuel pumps. I just received a barrel Sunoco e85-r which is race e85 so it should be pretty clean.

Sent from my SM-G965U using Tapatalk

redondoaveb · 05-06-2021, 07:57 PM

Quote:

Originally Posted by Hotrodz

Yep, pump e85 can be rough on injectors and fuel pumps. I just received a barrel Sunoco e85-r which is race e85 so it should be pretty clean.

Sent from my SM-G965U using Tapatalk

Definitely the way to go. I have Seb on the line right now. I'm going to go over the results with him

Spooler · 05-06-2021, 09:36 PM

That's what got you. Did you have the injectors cleaned before you started using them again? That was one of my worst fears. I had mine cleaned and tested when they put my new motor in. They also drained the tank of the pump E85 in it.

redondoaveb · 05-06-2021, 09:41 PM

Quote:

Originally Posted by Spooler

That's what got you. Did you have the injectors cleaned before you started using them again? That was one of my worst fears. I had mine cleaned and tested when they put my new motor in. They also drained the tank of the pump E85 in it.

Nope, I didn't. Big mistake. If the one injector that was wide open was stuck wide open, it could have hydrolocked the motor also. Under boost with both fuel pumps going, that's a lot of fuel being dumped into the cylinder. I'll also have the old e85 drained this next go round. It looks like I will probably be going with the stage (Seb) turbos

instead of the stage 1. Unfortunately, they won't be available until August/September so my cars going to sit a few more months.

Spooler · 05-06-2021, 09:46 PM

See about installing an Injector Dynamic's ID-750 fuel filter. I have one. My injectors were good to go. I attribute it to the fuel filter.

Spooler · 05-06-2021, 09:54 PM

Watch this again. It was posted in my thread.

redondoaveb · 05-06-2021, 10:07 PM

Quote:

Originally Posted by Spooler

See about installing an Injector Dynamic's ID-750 fuel filter. I have one. My injectors were good to go. I attribute it to the fuel filter.

Good idea, I'll talk to Seb about it

redondoaveb · 05-06-2021, 10:28 PM

Quote:

Originally Posted by Spooler

Watch this again. It was posted in my thread.

I like that filter. Seb really likes it too. There will definitely be one going on my car. Thanks for the tip

Spooler · 05-06-2021, 11:04 PM

Another great video.

redondoaveb · 05-06-2021, 11:33 PM

Quote:

Originally Posted by Spooler

Another great video.

Definitely a great video

05-06-2021, 06:42 PM	#2 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Well it looks like you are good to go after cleaning. Sent from my SM-G965U using Tapatalk Rusty, Spooler and redondoaveb like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

05-06-2021, 09:36 PM	#8 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,853 Drives: 2013 Nismo 370z Rep Power: 2684392	That's what got you. Did you have the injectors cleaned before you started using them again? That was one of my worst fears. I had mine cleaned and tested when they put my new motor in. They also drained the tank of the pump E85 in it. Hotrodz and redondoaveb like this.

05-06-2021, 09:46 PM	#10 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,853 Drives: 2013 Nismo 370z Rep Power: 2684392	See about installing an Injector Dynamic's ID-750 fuel filter. I have one. My injectors were good to go. I attribute it to the fuel filter. JARblue, Rusty, Hotrodz and 1 others like this.

05-06-2021, 09:54 PM	#11 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,853 Drives: 2013 Nismo 370z Rep Power: 2684392	Watch this again. It was posted in my thread. Rusty, Hotrodz and redondoaveb like this.

05-06-2021, 11:04 PM	#14 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,853 Drives: 2013 Nismo 370z Rep Power: 2684392	Another great video. Rusty, Hotrodz and redondoaveb like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel Injector Confusion	MoulaZ	Engine & Drivetrain	2	01-24-2017 04:32 AM
Fuel Injector Comp	ChaseZ	Forced Induction	9	12-08-2016 03:12 PM
fuel injector	Z eliminator	Tuning	0	07-28-2016 09:34 AM
09 GTR fuel injector question?	arnoldas	Tuning	0	03-22-2016 06:23 PM
fuel injector size	TKomodo	Forced Induction	3	12-11-2013 11:21 PM