Shifting problems after transmission replacement

Ben370 · 04-22-2021, 10:48 PM

I changed transmission, clutch, pressure plate, flywheel, pilot bushing, master cylinder, ZSpeed CSC, short shifter, and had it bled again.
After bleeding, shifted nice for a few minutes but tough shifting came back. Mechanic said he noticed some weeping from the bleed screw after bleeding. Could it be the CSC even though I just changed it? Mechanic was saying synchros, but I doubt that as well since everything's new.

SouthArk370Z · 04-22-2021, 11:45 PM

Quote:

Originally Posted by Ben370

... Mechanic said he noticed some weeping from the bleed screw after bleeding. ...

So... why didn't he fix it when he noticed it? You have a leak in the hydraulic system; fix that and it may fix your other problems, too.

Ben370 · 04-23-2021, 12:06 AM

I only asked for the bleed, not troubleshooting so I didn't get charged since he didn't fix it.

Update: asked mechanic and he was saying the leak was with the bleeder threads so getting a new bleed screw and hoping that fixes it.

Final update: the pressure plate bolts were loose because I didn't tighten them enough. That was the problem the whole time.

04-22-2021, 10:48 PM	#1 (permalink)
Ben370 Base Member Join Date: Mar 2016 Location: Virginia Posts: 71 Drives: [SOLD] 09 Tour/Sport Rep Power: 3364	Shifting problems after transmission replacement I changed transmission, clutch, pressure plate, flywheel, pilot bushing, master cylinder, ZSpeed CSC, short shifter, and had it bled again. After bleeding, shifted nice for a few minutes but tough shifting came back. Mechanic said he noticed some weeping from the bleed screw after bleeding. Could it be the CSC even though I just changed it? Mechanic was saying synchros, but I doubt that as well since everything's new.

04-23-2021, 12:06 AM	#3 (permalink)
Ben370 Base Member Join Date: Mar 2016 Location: Virginia Posts: 71 Drives: [SOLD] 09 Tour/Sport Rep Power: 3364	I only asked for the bleed, not troubleshooting so I didn't get charged since he didn't fix it. Update: asked mechanic and he was saying the leak was with the bleeder threads so getting a new bleed screw and hoping that fixes it. Final update: the pressure plate bolts were loose because I didn't tighten them enough. That was the problem the whole time. Last edited by Ben370; 06-02-2021 at 07:59 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transmission shifting problem	z370r	Engine & Drivetrain	7	03-17-2017 07:39 PM
2012 Automatic Shifting Problems?	yongxshin	Engine & Drivetrain	1	05-16-2016 09:42 AM
Transmission shifting problems	luigi90210	Engine & Drivetrain	16	02-10-2014 09:48 AM
Big problems Shifting into 4th	Whitemtl370	Engine & Drivetrain	8	11-11-2011 03:38 PM
6MT Shifting problems	RedNismo	Engine & Drivetrain	8	03-28-2010 09:08 PM