JWT C2 cams

redondoaveb · 02-09-2021, 10:37 PM

I figured since Specialty Z will be pulling my blown motor and installing my spare that I'd go ahead and have them install a set of JWT C2 cams. Then I read this on Z1's website. My spare motor is a 2017.

Rusty · 02-09-2021, 10:44 PM

You would have to remove the heads to install them just for the machine work.

Spooler · 02-09-2021, 10:47 PM

You aren't going to build the motor? I have a set of Carrillo Pro A beam rods and some custom Diamond 11:1 pistons for sale soon.

Spooler · 02-09-2021, 10:50 PM

Let me know. I will let them go for a reasonable price.

redondoaveb · 02-09-2021, 10:52 PM

Quote:

Originally Posted by Spooler

You aren't going to build the motor? I have a set of Carrillo Pro A beam rods and some custom Diamond 11:1 pistons for sale soon.

My money tree is pretty bare. As soon as you said "custom", all I could see is $$$$$

Spooler · 02-09-2021, 11:00 PM

Well, I told you not to do it.

redondoaveb · 02-09-2021, 11:03 PM

Quote:

Originally Posted by Spooler

Well, I told you not to do it.

Spooler · 02-10-2021, 09:01 AM

Quote:

Originally Posted by redondoaveb

Not to turn it up. LOL Blown motors suck.

Spooler · 02-10-2021, 10:15 AM

Dump that super charger and get this.

Fast Intentions Twin Turbo

redondoaveb · 02-10-2021, 10:22 AM

Quote:

Originally Posted by Spooler

Not to turn it up. LOL Blown motors suck.

Actually, I'm not sure that was the cause. It may a loud whirring noise, almost like a belt broke and got wrapped around pulleys before the motor blew. Belts are still intact. I think my ic still may have had impeller debris in it then finally got lodged loose and sucked into the motor. We were having a hard time getting it to make power after the first sc broke. It took almost 3 psi more to make the same power.

redondoaveb · 02-10-2021, 10:26 AM

Quote:

Originally Posted by Spooler

Dump that super charger and get this.

Fast Intentions Twin Turbo

His car's at Specialty Z right now. Seb gave me his info yesterday. I'm still weighing my options.

Hotrodz · 02-10-2021, 12:00 PM

Quote:

Originally Posted by redondoaveb

His car's at Specialty Z right now. Seb gave me his info yesterday. I'm still weighing my options.

I also have my FI stage 1 turbos and 1050 ID injectors. FI will make you the rest of the kit which may be cheaper still. I will make you a great deal.

It just seems that SC for the Z have more issues than turbo cars, but that might be because of my own bias.

Sent from my SM-G965U using Tapatalk

redondoaveb · 02-10-2021, 12:39 PM

Quote:

Originally Posted by Hotrodz

I also have my FI stage 1 turbos and 1050 ID injectors. FI will make you the rest of the kit which may be cheaper still. I will make you a great deal.

It just seems that SC for the Z have more issues than turbo cars, but that might be because of my own bias.

Sent from my SM-G965U using Tapatalk

We may be talking about those turbos. I know the stage 1 are a little on the small size. Kind of like the gtr turbos.

If you just go with the basic sc set up and have a competent installer then there really aren't any issues with the sc. The problem is, there aren't any real sc experts for our car and there are a lot of unknown's when getting into the stage my car was in. A lot of trial and error.

There's a carb legal tt kit for the z that's getting close to approval that sounds interesting. Since it's going to be a few months before my car goes to Seb, my options are open.

Hotrodz · 02-10-2021, 01:20 PM

Quote:

Originally Posted by redondoaveb

We may be talking about those turbos. I know the stage 1 are a little on the small size. Kind of like the gtr turbos.

If you just go with the basic sc set up and have a competent installer then there really aren't any issues with the sc. The problem is, there aren't any real sc experts for our car and there are a lot of unknown's when getting into the stage my car was in. A lot of trial and error.

There's a carb legal tt kit for the z that's getting close to approval that sounds interesting. Since it's going to be a few months before my car goes to Seb, my options are open.

The stage 1 turbos I have are GT2860 RS. They can make over 700whp but on a stock block I got five years not going more than 620whp. The only issue I had was for tracking because they were into boost at about 2500 rpms so modulating the power in first and second was not doable. There was no boost by gear two years ago either with ECU tech.

Sent from my SM-G965U using Tapatalk

redondoaveb · 02-15-2021, 04:42 PM

I talked to JWT today and they said the head machining isn't limited to years. Any year could could have issues with the lobe clearance. It just depends on how that particular head was casted. If it was off a little bit then it may have a little extra casting material that needs to be ground off. It can be done with the head(s) on. You obviously just need to make sure you get all the shavings removed. They have a tutorial on their C9 cams that shows the process.

02-09-2021, 10:44 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	You would have to remove the heads to install them just for the machine work. Hotrodz and redondoaveb like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-09-2021, 10:47 PM	#3 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	You aren't going to build the motor? I have a set of Carrillo Pro A beam rods and some custom Diamond 11:1 pistons for sale soon. FL 4Motion, Rusty, Hotrodz and 1 others like this.

02-09-2021, 10:50 PM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Let me know. I will let them go for a reasonable price. FL 4Motion, Rusty, Hotrodz and 1 others like this.

02-15-2021, 04:42 PM	#15 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,361 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	I talked to JWT today and they said the head machining isn't limited to years. Any year could could have issues with the lobe clearance. It just depends on how that particular head was casted. If it was off a little bit then it may have a little extra casting material that needs to be ground off. It can be done with the head(s) on. You obviously just need to make sure you get all the shavings removed. They have a tutorial on their C9 cams that shows the process. Rusty and Hotrodz like this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where to buy jun cams	Elmo370z	Engine & Drivetrain	0	06-13-2015 02:26 AM
Aftermarket Cams	LAVA	Engine & Drivetrain	13	02-09-2015 12:35 PM
Stroker Kit plus Cams	Carbon_z	Engine & Drivetrain	5	11-24-2014 12:35 PM
cams for 370	jlask370	Engine & Drivetrain	5	05-08-2013 06:23 PM
Cams for 370z	animal23	Nismo 370Z	2	01-24-2013 05:49 AM

02-09-2021, 11:00 PM	#6 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Well, I told you not to do it.

02-10-2021, 10:15 AM	#9 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Dump that super charger and get this. Fast Intentions Twin Turbo