Adding more than max oil level

BettyZ · 12-14-2020, 10:04 PM

Quote:

Originally Posted by DrBacon

If anyone was curious, this is what the oil pan looked like

The engine... sh*t glitter?!?

FL 4Motion · 12-15-2020, 05:23 PM

Quote:

Originally Posted by DrBacon

It was the harbor freight of build experience, not the harbor freight of cost, I've seen the build sheet, nothing in that engine is cheap or oem.

The worst of both worlds then, that sucks man.

GL to you however you decide to proceed. LS swaps are getting easier by the day.

Regardless, pls keep us posted.

DrBacon · 12-18-2020, 02:49 AM

.

Rusty · 12-18-2020, 08:28 AM

Where did the big piece come from?

ZoomZ · 12-18-2020, 01:19 PM

Great detail. Thanks for sharing.

zz

DrBacon · 12-23-2020, 10:56 AM

.

onesekz · 12-23-2020, 12:05 PM

Quote:

Originally Posted by DrBacon

The consensus seems to be the main bearings were incorrectly sized, there's no evidence it was an oiling issue as all other bearings are fine (but they will be replaced just in case as well) and the oil passages are good. The block will be going to a machine shop to be checked over and cleaned, $1,400 depth gauges will be used to correctly size the new bearings this time.

How far off were the bearings?

Sent from my iPhone using Tapatalk

Ghostvette · 12-23-2020, 12:27 PM

Quote:

Originally Posted by DrBacon

The consensus seems to be the main bearings were incorrectly sized, there's no evidence it was an oiling issue as all other bearings are fine (but they will be replaced just in case as well) and the oil passages are good. The block will be going to a machine shop to be checked over and cleaned, $1,400 depth gauges will be used to correctly size the new bearings this time.

Was Plastigage used during assembly? That would have given you a heads-up that something wasn't quite right.

Rusty · 12-23-2020, 06:35 PM

Quote:

Originally Posted by DrBacon

The consensus seems to be the main bearings were incorrectly sized, there's no evidence it was an oiling issue as all other bearings are fine (but they will be replaced just in case as well) and the oil passages are good. The block will be going to a machine shop to be checked over and cleaned, $1,400 depth gauges will be used to correctly size the new bearings this time.

Where have I heard this before.? Hmmmmmmm.

rovert · 12-24-2020, 05:11 AM

Quote:

Originally Posted by DrBacon

The consensus seems to be the main bearings were incorrectly sized

No Sh1t Sherlock, how the Fu*# do you miss that.
What, was it just thrown together without checking any of the clearances.
Makes you wonder what else was missed.

DrBacon · 12-24-2020, 12:43 PM

.

rovert · 12-24-2020, 04:33 PM

Quote:

Originally Posted by DrBacon

Obviously it was checked,

Well, if it was Mate, who ever checked it is a Moron.
Would have been pretty Friggin obvious there was a problem.
As for the rest of it, just because it held up to a few miles & some dyno runs doesn't mean its been done properly.
Sounds like folks are taking advantage of your naivety.
Imo you need a Better Engine Builder, or this will be just the beginning.
Not trying to bust your balls Mate, just annoyed with the Snake oil salesmen in this industry.
Good luck with it all & I mean that sincerely.
Cheers.

Spooler · 12-24-2020, 05:37 PM

Quote:

Originally Posted by rovert

Not trying to bust your balls Mate, just annoyed with the Snake oil salesmen in this industry.

Cheers.

True, it is very hard to get down to the truth of what will hold and what won't. Lots of misinformation out there. One launch at the track and his block is going to crack
between the main studs and head studs. That is why they have a billet block that has been made. That's IF the car makes power. Curious to see what steps have been
taken to deal with head lift. From the pictures posted, I don't see enough.

DrBacon · 12-24-2020, 06:02 PM

.

Spooler · 12-24-2020, 06:15 PM

Quote:

Originally Posted by DrBacon

This engine is expected to be running 30-35psi of boost at full tilt, and we know there's a very good chance it'll run into head lift issues even with ARP L19 head studs, a step decked block and MLS headgaskets.

What headgasket did he use? He needs to use the BC headgasket. I see he has the rest of the solution. He is close. Cracking the block is a major concern for a DE. It is uncharted territory on the VHR.

12-18-2020, 02:49 AM	#33 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 285 Drives: 2014 Nismo Rep Power: 27365	. FL 4Motion, JARblue and Zingston like this. Last edited by DrBacon; 12-28-2020 at 10:29 PM.

12-18-2020, 08:28 AM	#34 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Where did the big piece come from? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-18-2020, 01:19 PM	#35 (permalink)
ZoomZ Track Member Join Date: Jan 2017 Location: Vancouver, BC Posts: 760 Drives: 17' 370Z Nismo Rep Power: 40617	Great detail. Thanks for sharing. zz FL 4Motion likes this.

12-23-2020, 10:56 AM	#36 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 285 Drives: 2014 Nismo Rep Power: 27365	. FL 4Motion and Rusty like this. Last edited by DrBacon; 12-28-2020 at 10:29 PM.

12-24-2020, 12:43 PM	#41 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 285 Drives: 2014 Nismo Rep Power: 27365	. Zingston likes this. Last edited by DrBacon; 12-28-2020 at 10:29 PM.

12-24-2020, 06:02 PM	#44 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 285 Drives: 2014 Nismo Rep Power: 27365	. Elmo370z and ZoomZ like this. Last edited by DrBacon; 12-28-2020 at 10:30 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adding LSD	Cj7379	Engine & Drivetrain	1	12-31-2017 10:08 PM
Adding oil to new Z?	Mr Pinchy	Nissan 370Z General Discussions	32	12-22-2015 07:59 AM
Adding Distilled Water to OEM Battery -- correct level?	Jordo!	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	9	11-19-2013 11:35 AM
Adding a sub??	370guy	Audio & Video	10	02-21-2012 12:13 AM
Best High Level to Low Level Converter	harry370z	Audio & Video	2	12-15-2011 07:32 AM