![]() |
I adjust them as per that fsm page and use ecutek to view the voltages I did not adjust the vvel arms in any way. All parts came off a
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#9 (permalink) |
Track Member
![]() Join Date: May 2017
Location: Cayman Islands
Posts: 685
Drives: 2010 370Z
Rep Power: 57454 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I adjust them as per that fsm page and use ecutek to view the voltages
I did not adjust the vvel arms in any way. All parts came off a known good motor and all values were as they are supposed to be. The power is good up until 6500 in 3rd, the shut down happens higher up in the rpm range in the lower gears, it happens at 5500rpm in 4th, the island is too small to even try a 5th gear with pull. Which is why I think it’s load dependent.
__________________
2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
P1606 VVEL issue/code | Carbon_z | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 42 | 06-16-2020 07:56 PM |
Vvel | elperuano | Forced Induction | 25 | 05-12-2019 09:14 PM |
Vvel | nis350 | Engine & Drivetrain | 3 | 10-02-2016 07:07 PM |
Vvel ???? | pokeyl | Tuning | 8 | 06-01-2011 03:33 PM |
Vvel | destinyZ | Engine & Drivetrain | 13 | 09-19-2010 06:32 PM |