At what point do you stop because of high temperatures?

Spooler · 07-15-2020, 11:10 AM

Quote:

Originally Posted by JARblue

A better radiator and fans would be a nice solution. Too bad there isn't one. Except maybe Ron Davis? Which is $$$

Or, you can suck it up and get a CSF that will last 2 yrs or so. LOL It's just a cost added into a turbo cars maintenance. Daily driving a modified car is not cheap.

Optimiser · 07-15-2020, 09:25 PM

Quote:

Originally Posted by Geoff-AU

Bonnet vents are a band-aid. Fit a better radiator. Make sure the cooling fan works (duh).

They are a bit more than a bandaid from what I've noticed with mine.

TheFLiP · 07-16-2020, 01:22 AM

I've been dealing with heat issues here in El Paso as well. Peak ambient temps for the past week and a half were at around 105°F to 110°F.

I had waterless coolant and hood vents and this was the temps I had just driving home by the time I pulled into the driveway: four dots from max, 237°F (coolant), and 240°F oil.

I am in the process of switching to distilled water + water wetter. So far, the initial test during the first flush with just water had way lower idle temps: 208°F coolant and 203°F oil temp. Just need to remember to switch to 50/50 for the winter.

07-16-2020, 01:22 AM	#18 (permalink)
TheFLiP Base Member Join Date: Dec 2014 Location: El Paso, TX Posts: 39 Drives: 12 370zSport BLK M6 Rep Power: 6720	I've been dealing with heat issues here in El Paso as well. Peak ambient temps for the past week and a half were at around 105°F to 110°F. I had waterless coolant and hood vents and this was the temps I had just driving home by the time I pulled into the driveway: four dots from max, 237°F (coolant), and 240°F oil. I am in the process of switching to distilled water + water wetter. So far, the initial test during the first flush with just water had way lower idle temps: 208°F coolant and 203°F oil temp. Just need to remember to switch to 50/50 for the winter. __________________ 12 370Z Sport \| AEM \| Stillen \| SOHO \| Motordyne \| Fast Intentions \| ZSpeed \| Z1 Motorsports \| SPL \| Whiteline \| Hotchkis \| KW \| NM Imports \| Goose Tuned \| ECUTek \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Spec Chassis Braces [6-Point Front & 2-Point Rear] Installed on Nismo Review	jcosta79	Brakes & Suspension	33	01-23-2018 01:30 AM
[FOR SALE] High Mounted Stop Lamp (tinted)	cooltoy	Parts for sale (Private Classifieds)	120	03-09-2015 07:22 AM
Normal, High, and Low Temperatures and Pressures for 2014 Nissan 370z?	Nuc370z	Exterior & Interior	2	04-28-2014 10:21 PM
DOT 4, High boiling point brake fluid. PMU G-Four 335. You have to try this!	KamiSpeed	Suspension/Brakes	24	02-08-2012 04:33 PM
clutch high engagement point	bradz	Engine & Drivetrain	3	07-31-2009 02:19 PM