Oil change with oil cooler

vipor · 01-19-2010, 11:25 AM

Quote:

Originally Posted by Modshack

You have no issues at all...Just pull off one of the AN fittings at the Adapter plate and let it drain.. If you installed with fittings "UP" like most of the kits out there, just undo BOTH AN fittings and use air pressure to blow the oil out. If you're so anal to need to get every drop out, then by all means turn this in to a major project. Personally, it's really not worth the effort IMO..

and NO, you don't have to manually fill the cooler before starting the engine..

haha didn't even think about removing the fittings at the sandwich plate. good thinkin' lincoln

now i just need to find a -10 AN compressor adapter. heh.

Modshack · 01-19-2010, 11:28 AM

Quote:

Originally Posted by vipor

i just need to find a -10 AN compressor adapter. heh.

Or just one of those cone shaped rubber blow gun tips you find in the $5 Harbor freight air kits...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First Oil Change?	Rhinetom	Engine & Drivetrain	31	08-19-2014 10:07 PM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
Oil Cooler.....Trans Cooler...	kannibul	Engine & Drivetrain	6	12-31-2009 06:32 PM
1st oil change	KiddAdelaide	Australia/New Zealand	8	08-26-2009 04:58 PM
First Oil Change	cotizi	Engine & Drivetrain	3	03-27-2009 11:34 AM