Thermostatic sandwich plate w/npt fittings

redondoaveb · 04-21-2020, 08:44 PM

Anybody know of a thermostatic sandwich plate that has 2- 1/8" npt ports? I want to run my oil temp and oil pressure gauges off of it.

Has anyone run a non-thermostatic plate as a daily driver?

Spooler · 04-21-2020, 10:37 PM

Quote:

Originally Posted by redondoaveb

Anybody know of a thermostatic sandwich plate that has 2- 1/8" npt ports? I want to run my oil temp and oil pressure gauges off of it.

Has anyone run a non-thermostatic plate as a daily driver?

Yes, The Fast Intentions TT kit has a remote filter mount that is not on a thermostatic plate. May be best to run a remote setup.

redondoaveb · 04-21-2020, 11:10 PM

Quote:

Originally Posted by Spooler

Yes, The Fast Intentions TT kit has a remote filter mount that is not on a thermostatic plate. May be best to run a remote setup.

That is a possibility. I talked to Kevin at FI today and he didn't have any suggestions. He didn't mention their remote set up but I only asked him about a sandwich plate. Specialty Z has a mishimoto non thermostatic plate on their website with two npt ports. I have an email into Seb to see if he thinks I can use it without my themostatic plate. I don't have enough room to stack the two.

Rusty · 04-21-2020, 11:27 PM

Quote:

Originally Posted by redondoaveb

That is a possibility. I talked to Kevin at FI today and he didn't have any suggestions. He didn't mention their remote set up but I only asked him about a sandwich plate. Specialty Z has a mishimoto non thermostatic plate on their website with two npt ports. I have an email into Seb to see if he thinks I can use it without my themostatic plate. I don't have enough room to stack the two.

Someone yesterday just posted about on a remote oil filter set up. Believe it had ports in the plate. I don't remember if if was a thermostatic or not. I kind of glazed over it.

redondoaveb · 04-21-2020, 11:36 PM

Quote:

Originally Posted by Rusty

Someone yesterday just posted about on a remote oil filter set up. Believe it had ports in the plate. I don't remember if if was a thermostatic or not. I kind of glazed over it.

If I don't need a thermostatic, I'd just buy the plate. I did find a mishimoto thermostatic plate with two ports, I just don't know if it'll work on the Z. I'll call mishimoto tomorrow or hopefully I'll hear back from Seb tonight.

Rusty · 04-21-2020, 11:41 PM

I don't know. Mishashitymoto?

redondoaveb · 04-21-2020, 11:42 PM

Quote:

Originally Posted by Rusty

I don't know. Mishashitymoto?

I know but there's nothing else out there. Mocal doesn't appear to make one. Earl's has nothing.

Rusty · 04-21-2020, 11:48 PM

Quote:

Originally Posted by redondoaveb

I know but there's nothing else out there. Mocal doesn't appear to make one. Earl's has nothing.

If you get one. Check the o-rings.

redondoaveb · 04-21-2020, 11:53 PM

Quote:

Originally Posted by Rusty

If you get one. Check the o-rings.

I guess there's been some failure issues on some.

Rusty · 04-22-2020, 12:02 AM

Quote:

Originally Posted by redondoaveb

I guess there's been some failure issues on some.

Ohhhhhh yea. There is a whole thread about it and a guy losing his motor.

redondoaveb · 04-22-2020, 12:10 AM

Quote:

Originally Posted by Rusty

Ohhhhhh yea. There is a whole thread about it and a guy losing his motor.

That's not I want to hear.

Rusty · 04-22-2020, 12:36 AM

Quote:

Originally Posted by redondoaveb

That's not I want to hear.

Guess when Mishy put the plate together. They sliced an o-ring. Causing the engine to dump all of it's oil. And you know the oil light doesn't come on until it see 5 psi.

redondoaveb · 04-22-2020, 01:30 AM

Quote:

Originally Posted by Rusty

Guess when Mishy put the plate together. They sliced an o-ring. Causing the engine to dump all of it's oil. And you know the oil light doesn't come on until it see 5 psi.

I have an oil pressure gauge and have the warning light set to come on at 15 psi.

BettyZ · 04-22-2020, 06:50 AM

Review of Mishimoto Thermostatic Oil Sandwich Plate

Zoom Zoom? more like boom boom.

SS_Firehawk · 04-22-2020, 07:45 AM

Here's where you can add a sensor to your existing oil cooler kit.
AN Sensor Adapter Fittings | Improved Racing

If you want a better Thermostatic sandwich plate (you'll pay $ for it)

Oil Filter Sandwich Plate with Thermostat for Oil Coolers ENV-131

They also have a remote filter plate I'm using. But just some ideas.

04-21-2020, 08:44 PM	#1 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,366 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	Thermostatic sandwich plate w/npt fittings Anybody know of a thermostatic sandwich plate that has 2- 1/8" npt ports? I want to run my oil temp and oil pressure gauges off of it. Has anyone run a non-thermostatic plate as a daily driver? __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

04-21-2020, 11:41 PM	#6 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,219 Drives: 2011 Nismo GM 6M Rep Power: 2684438	I don't know. Mishashitymoto? NissanTracker and redondoaveb like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-22-2020, 06:50 AM	#14 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Review of Mishimoto Thermostatic Oil Sandwich Plate Zoom Zoom? more like boom boom. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

04-22-2020, 07:45 AM	#15 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Here's where you can add a sensor to your existing oil cooler kit. AN Sensor Adapter Fittings \| Improved Racing If you want a better Thermostatic sandwich plate (you'll pay $ for it) Oil Filter Sandwich Plate with Thermostat for Oil Coolers ENV-131 They also have a remote filter plate I'm using. But just some ideas. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to Tell If Oil Cooler Sandwich Plate Is Thermostatic?	Tractionless	Engine & Drivetrain	8	02-17-2018 03:28 PM
[FOR SALE] Mocal Thermostatic Sandwich Plate	lhinojos	Parts for sale (Private Classifieds)	7	04-13-2017 07:36 PM
Z1 thermostatic sandwich plate compatibility	JCA92	Engine & Drivetrain	9	05-27-2015 08:05 PM
[FOR SALE] Mocal Thermostatic Plate & Fittings	Cbtech	Parts for sale (Private Classifieds)	27	01-08-2014 04:54 AM