1/8 npt y adapter

redondoaveb · 01-23-2020, 08:38 PM

Does anyone know a company that might stock this style y adapter? What I'm actually looking for is the single side being male 1/8th npt and on the y side it needs to be both female 1/8th npt.

I thought I could use this Edelbrock adapter and just take the male fittings out of the y side but Edelbrock has discontinued them and doesn't have any in stock.

crazy4oldcars · 01-23-2020, 08:53 PM

I googled 1/8 npt y fitting and got several hits.

Kirk B.

redondoaveb · 01-23-2020, 09:52 PM

Quote:

Originally Posted by crazy4oldcars

I googled 1/8 npt y fitting and got several hits.

Kirk B.

I googled the hell out of exactly what I'm looking for and only got the one for Edelbrock. Possible you could send me a couple links. Would be appreciated.

jchammond · 01-23-2020, 10:42 PM

Never bought anything from this company; but you could add a male 1/8xclose...or Farr

crazy4oldcars · 01-23-2020, 10:48 PM

I got suckered. They were all 1/4" or for beer.
Sorry dude. I jumped when I should have looked.

Kirk B.

Rusty · 01-23-2020, 10:56 PM

Try JEGS. They have more stuff like this then Summit. I get all of my AN parts and braided lines from them.

jchammond · 01-23-2020, 10:59 PM

Also look underneath some brands like Parker, Imperial or Weatherhead

Lots more out there; may have to get hydraulic fittings instead of brass, as it would be steel

Spec Jay · 01-23-2020, 11:03 PM

If you're looking to tap off the oil pressure sensor port, those adapters are prone to leaking due to the factory sensor being so heavy, I recommend doing a jumper line and a distribution block.

I used this

https://www.instagram.com/p/BU5QJRQgBtB/

https://raceenergyperformance.com/pr...ribution-block

redondoaveb · 01-23-2020, 11:17 PM

Quote:

Originally Posted by jchammond

Never bought anything from this company; but you could add a male 1/8xclose...or Farr

I did find that one but I'm hesitating on buying from china unless I can't find anything else.

redondoaveb · 01-23-2020, 11:18 PM

Quote:

Originally Posted by crazy4oldcars

I got suckered. They were all 1/4" or for beer.
Sorry dude. I jumped when I should have looked.

Kirk B.

I saw those same one's.

redondoaveb · 01-23-2020, 11:21 PM

Quote:

Originally Posted by Spec Jay

If you're looking to tap off the oil pressure sensor port, those adapters are prone to leaking due to the factory sensor being so heavy, I recommend doing a jumper line and a distribution block.

I used this

https://www.instagram.com/p/BU5QJRQgBtB/

https://raceenergyperformance.com/pr...ribution-block

Thanks, that distribution block may work, i need to look a little closer at my clearance issue

redondoaveb · 01-23-2020, 11:31 PM

Quote:

Originally Posted by Rusty

Try JEGS. They have more stuff like this then Summit. I get all of my AN parts and braided lines from them.

No luck on Jegs.

Rusty · 01-23-2020, 11:34 PM

The one I used for my oil pressure gauge is no longer made.

redondoaveb · 01-23-2020, 11:51 PM

Quote:

Originally Posted by Rusty

The one I used for my oil pressure gauge is no longer made.

I found a couple of the Edelbrock ones on ebay but I had to message the sellers to make sure they stock them and not shipping from the manufacturer. Both sellers are automotive companies.

soill370z · 01-24-2020, 04:07 AM

what are you using it for?

01-23-2020, 10:48 PM	#5 (permalink)
crazy4oldcars Enthusiast Member Join Date: Aug 2016 Location: SE Texas Posts: 448 Drives: '16 Nismo Tech Rep Power: 28413	I got suckered. They were all 1/4" or for beer. Sorry dude. I jumped when I should have looked. Kirk B. redondoaveb likes this.

01-23-2020, 10:56 PM	#6 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,185 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Try JEGS. They have more stuff like this then Summit. I get all of my AN parts and braided lines from them. jchammond and redondoaveb like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-23-2020, 10:59 PM	#7 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Also look underneath some brands like Parker, Imperial or Weatherhead Lots more out there; may have to get hydraulic fittings instead of brass, as it would be steel redondoaveb likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-23-2020, 11:03 PM	#8 (permalink)
Spec Jay A True Z Fanatic Join Date: Apr 2009 Location: Bummerton Posts: 1,510 Drives: MtB 09 370z Rep Power: 19	If you're looking to tap off the oil pressure sensor port, those adapters are prone to leaking due to the factory sensor being so heavy, I recommend doing a jumper line and a distribution block. I used this https://www.instagram.com/p/BU5QJRQgBtB/ https://raceenergyperformance.com/pr...ribution-block Rusty and redondoaveb like this. __________________ 09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay

01-23-2020, 11:34 PM	#13 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,185 Drives: 2011 Nismo GM 6M Rep Power: 2684437	The one I used for my oil pressure gauge is no longer made. redondoaveb likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-23-2020, 08:53 PM	#2 (permalink)
crazy4oldcars Enthusiast Member Join Date: Aug 2016 Location: SE Texas Posts: 448 Drives: '16 Nismo Tech Rep Power: 28413	I googled 1/8 npt y fitting and got several hits. Kirk B.

01-24-2020, 04:07 AM	#15 (permalink)
soill370z Base Member Join Date: Mar 2015 Location: illinois Posts: 134 Drives: 13 nismo 370z Rep Power: 10	what are you using it for? redondoaveb likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil Pressure Adapter - Which One	osbornsm	Engine & Drivetrain	12	03-21-2016 01:43 AM
Need help with Antenna Adapter	JCarter	Audio & Video	9	06-09-2014 05:09 PM
TH400 Adapter	phunk	Track / Autocross / Drifting / Dragstrip	0	02-17-2014 08:45 PM
Oil filter adapter	mento	Tuning	7	02-12-2013 06:56 PM
Antenna Adapter	zero610	Audio & Video	0	04-04-2009 10:59 AM