![]() |
Originally Posted by Leadfooted Ok first off if all you got to say is for the price you should go forced induction keep scrolling please true or not it's not
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#7 (permalink) | |
A True Z Fanatic
Join Date: Apr 2013
Location: st. petersburg
Posts: 5,724
Drives: 09 nissan 370z Sp M6
Rep Power: 295378 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
- Far as raising you rev limiter up is pointless if you're looking to gain more power, only one person I've seen as made power past 8K he ran Jun cams, a dry sump and at the time bunch of 1 off parts. There is one person, Rabbit Hole Motorsports who is building a high rev VVel with upgraded goodies on the intake side. So he will be his own guinea to see if that solves the valve float and unwanted harmonics with revving and sustaining 8,000+ rpms. I would of talked to either Mamotorsports and JWT (I"m sure you have heard of Valkyrie's 370z) about your build before pulling that trigger. They probably would have pointed you in the direction of at least a bryant racing billet crankshaft probably one of the best custom crankshaft made. I was going down this route 5 years ago, but wanted more power. Also you probably could of had a custom ground exhaust cam specifically made for your motor and needs. Info you're looking for is out there, you just have to be annoying about getting that info. If you're going this far into building the motor you really might want to consider a standalone of some type, Vit tuned makes a Pnp for a motec 150, Mamotorsports has both motec and emtron kv12 tuners, don't know much about dynosty haltech 2500. If you're stricly using it for the track and only running race gas bump the compression even higher, with a great tuner and a standalone you could still run pump gas with octane booster without it blowing up. Kels made 600HP (500whp+) on pump with octane booster. Pm BGTV8 He is building a VVel ITB DWB. He will answer any questions you have to a far better degree than i can. Hope this helps, good luck on your adventure. I apologize for not going into much detail, but with these type of threads about build the case is like the old saying "You can lead a horse to water, but you can't make him drink" Plus its late dam it |
|
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another Supercharger Build in the Works | V8Killer | Forced Induction | 30 | 06-25-2020 10:46 AM |
Need help! Would these Works fit? | U-NVmyZ? | Nissan 370Z General Discussions | 6 | 06-16-2018 10:21 AM |
How an LSD works | Red__Zed | Engine & Drivetrain | 6 | 05-23-2012 06:07 PM |
in the works | It`s Z Time | Northern California Region | 6 | 01-16-2012 08:53 PM |
Datsun Roadster 1600...To build or not to build | motoextreme | The Lounge (Off Topic) | 66 | 02-13-2010 12:40 AM |