C1109-00 code - no CEL tho

Tosh · 04-10-2023, 05:09 PM

Quote:

Originally Posted by Dreadnaught

Sounds like you could have high humidity/moisture in the air where you are. The belt will be damp when sitting over night and when you start your car up in the morning you get a belt squeak until the moisture goes away.

What you say sounds believable, but with the pulleys, I also changed the belt. On top of that, it squeaks on start even after normal driving for 15-20 minutes, if I make a quick stop for something. It takes at least 30min of normal driving to be able to start without squeaking.

ZStalker505 · 04-10-2023, 05:28 PM

Ever since I got my car there has been c1109-00 and c1707-00 in the Ecutek DTCs. No other indications anything is wrong....

Inflaymes · 01-20-2025, 01:14 AM

Just and FYI on this code if no one found the culprit. C1109 is some kind of voltage code for the abs.. there is a major ground under the dash that is usually is responsible for this.. the code is benign and fix is like a whole day affair.

Horizon · 02-14-2025, 11:07 PM

Quote:

Originally Posted by Inflaymes

Just and FYI on this code if no one found the culprit. C1109 is some kind of voltage code for the abs.. there is a major ground under the dash that is usually is responsible for this.. the code is benign and fix is like a whole day affair.

Can you provide any more info on this? I tried to do a bit of research, but I found nothing related to the ground you’re talking about.

Inflaymes · 02-17-2025, 02:26 AM

I had the same code. (mine went away and I've never seen it before my last tune) could be not an issue. My tuner informed me on what the issues can be. You can start with the easy ones and proceed on. This is from 350z site but I assume the connections are roughly the same. Check battery voltage, etc. One guy had a bad alternator that was over charging the battery. Fixed that and it went away.

https://my350z.com/forum/maintenance...-light-on.html

also, general fix etc.

https://obdadvisor.com/codes/c1109-nissan/

Quote:

Originally Posted by Horizon

Can you provide any more info on this? I tried to do a bit of research, but I found nothing related to the ground you’re talking about.

01-20-2025, 01:14 AM	#18 (permalink)
Inflaymes Base Member Join Date: Mar 2018 Location: Des Moines, Iowa Posts: 171 Drives: 2014 370z Nismo Rep Power: 7051	Just and FYI on this code if no one found the culprit. C1109 is some kind of voltage code for the abs.. there is a major ground under the dash that is usually is responsible for this.. the code is benign and fix is like a whole day affair. __________________ 2014 370z Nismo Fairlady \| Gold Powdercoated Nismo Rays \| Z1 Ported Manifold \| RJM Adjustable Clutch Pedal \| Berk Test Pipes \| Beluga Racing Exhaust \| Custom Billetworkz Imperial Sledge Shift Knob \| Carbon Fiber, Flat-Bottom Steering Wheel \| Ecu-Tek Custom Tune

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5 CEL at once; c1109, p0300, p3434, p2a00, p0171	Funkby	Engine & Drivetrain	4	02-22-2016 09:57 AM
Code p200.a/f code help	YzGyz	Tuning	2	11-15-2015 10:11 PM
P0300 code - SES Light came on, got the code verified, now the light is off	kittens	Engine & Drivetrain	1	12-26-2013 07:02 PM
CEL code	xenogear81	Engine & Drivetrain	1	12-16-2013 04:03 PM
XM Code?	KyleBucket	Audio & Video	4	03-02-2011 06:06 PM

04-10-2023, 05:28 PM	#17 (permalink)
ZStalker505 Base Member Join Date: Jan 2023 Location: NM Posts: 191 Drives: 14 SC Nismo Rep Power: 3	Ever since I got my car there has been c1109-00 and c1707-00 in the Ecutek DTCs. No other indications anything is wrong....