Nissan 370Z Forum
Page 6 of 7 « First 45 6 7
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   New clutch time (http://www.the370z.com/engine-drivetrain/130880-new-clutch-time.html)

Rusty 06-01-2019 02:17 PM
Quote:
Originally Posted by BettyZ (Post 3857157)
Buy a QuickJack! Best. Investment. Ever.
How many inches does it raise?

Spooler 06-01-2019 02:53 PM
Quote:
Originally Posted by BettyZ (Post 3857157)
Buy a QuickJack! Best. Investment. Ever.
Buy a 2 post lift. Forget wallering around on the floor.

-ZS-Carpenter 06-01-2019 03:12 PM
Quote:
Originally Posted by Spooler (Post 3857210)
Buy a 2 post lift. Forget wallering around on the floor.
I do that every night in my dreams.

Sent from my SM-G965U using Tapatalk

BettyZ 06-01-2019 03:49 PM
Quote:
Originally Posted by Rusty (Post 3857204)
How many inches does it raise?
21.3 inches with the pinch weld blocks on top of the short urethane blocks. Fully collapsed they're 3 inches tall so you should be able to store them under the Z.

Costco/Home Depot regularly have sales, I bought mine from Costco for 900ish. Honestly the best $900 I've ever spent.

https://www.quickjack.com/car-lift-s...-car-lift.html

BettyZ 06-01-2019 03:50 PM
Quote:
Originally Posted by Spooler (Post 3857210)
Buy a 2 post lift. Forget wallering around on the floor.
Man, that floor is like my second bed. The concrete does wonders for my back, too.

-ZS-Carpenter 06-02-2019 06:22 PM
So something like the coolworx shifter is just out of my budget. But the zspeed is as long as no one tells the mrs I didn't need it :happydance:

Joe@ZSpeed 06-04-2019 02:39 PM
Quote:
Originally Posted by Rusty (Post 3856452)
Total rotating weight is 40 lbs. Hmmmmm
That's heavier than most regular kits... Clutch 18-20lbs, Fly 17.5lbs... ;)

-ZS-Carpenter 06-10-2019 08:26 AM
Got the trans out from under the car and cleaned up over the weekend. rjm pedal should be here today. I have 1 more question off to Joe. Once I hear back from him the order will be placed. With any luck it should be off the stands in 2-3 weekshttps://uploads.tapatalk-cdn.com/201...09e231b005.jpg

Sent from my SM-G965U using Tapatalk

Zyonara91 06-10-2019 09:46 AM
Quote:
Originally Posted by JARblue (Post 3856010)
The CMAK is self-adjusting. The Z1 CSCEK has to be adjusted.

I've had the Z1 kit for several years now. It is an annoyance (though easy) to adjust and it's not made with quality parts. I've had to replace the cylinder about every 12-15K miles (over 50K miles on the kit). I thought I might be doing something wrong, but I still experienced the same failure rate even after having Austin Z Clinic replace it for me.
I have the Z1 as well. How do you even go about adjusting it? I have no idea. . .

-ZS-Carpenter 06-10-2019 06:51 PM
So here is the final shopping list for those interested. I did forget 1 thing, a new shift knob. Thinking about starting a new thread next to the what oil should i use to figure that one out :rofl2:

Zspeed stage 3 super street clutch, Cmak, oem cmc, ect

rjm v3.3 pedal

Torque Solutions Trans Mount

Zspeed Short Throw Shifter

New bolts, Motul fluids all around, all the hot stuff is getting wrapped to keep the hot in and the cold stuff double wrapped to keep the hot out.

fingers crossed in 3 weeks I'm looking to plan a break in road trip :happydance::driving:

jchammond 06-10-2019 07:02 PM
Quote:
Originally Posted by -ZS-Carpenter (Post 3859460)
Got the trans out from under the car and cleaned up over the weekend. rjm pedal should be here today. I have 1 more question off to Joe. Once I hear back from him the order will be placed. With any luck it should be off the stands in 2-3 weekshttps://uploads.tapatalk-cdn.com/201...09e231b005.jpg

Sent from my SM-G965U using Tapatalk
Looking like tranny is sitting on a roll around chair :icon17:

-ZS-Carpenter 06-10-2019 07:21 PM
Quote:
Originally Posted by jchammond (Post 3859613)
Looking like tranny is sitting on a roll around chair :icon17:
I'm too old to wrestle it out without one. It's a little janky but it's getting the job done.

Sent from my SM-G965U using Tapatalk

Rusty 06-10-2019 07:26 PM
Quote:
Originally Posted by -ZS-Carpenter (Post 3859620)
I'm too old to wrestle it out without one. It's a little janky but it's getting the job done.

Sent from my SM-G965U using Tapatalk
Me too. Used to lay on my back and press cast iron case BW T10's and Hemi 4 speeds into place. That ain't happening anymore. The aluminum case Super T10's and the M21 and M22's wasn't bad.

-ZS-Carpenter 06-11-2019 04:56 AM
Joe don't mess around with the shipping. Should have everything on Wednesday.

Sent from my SM-G965U using Tapatalk

madwi 06-11-2019 05:05 AM
Quote:
Originally Posted by -ZS-Carpenter (Post 3859700)
Joe don't mess around with the shipping. Should have everything on Wednesday.

Sent from my SM-G965U using Tapatalk
Usually 1 day shipping for me from Zspeed. :rock: Cant argue with that.


All times are GMT -5. The time now is 12:16 PM.
Page 6 of 7 « First 45 6 7
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2