Is it necessary to ger an Oil Cooler?

Spooler · 06-06-2019, 03:18 PM

Quote:

Originally Posted by SPDKING

Z1, Stillen or Fast Intentions, they all use the same stuff I think except the Stillen only has 25 row and the Fast Intentions is the cheapest. I think the Stillen is the most expensive (not by much) if you don't care about the protective hose wrapping like on the Z1.

No sure where you got your information. Nobody buys the Stillen kits because you can't use a factory oil filter (unless they have recently changed them). The Fast Intentions are the highest quality due to the braided lines they use (Teflon Inserts and last a long time) and they only sell a Setrab 34 row oil cooler. They also offer everything needed to remove the factory oil cooler 2012 to current car. The Z1 you can cheap out and get a Mocal oil cooler which is not as good. They also offer 19 row, 24 row, and 34 row oil coolers. The braided lines are just standard rubber lines. Nothing special.

So, the Z1 and Fast Intentions oil cooler kits are both good. If you get the Z1 make sure to get the Setrab oil cooler. I just like the FI kit better due to the
fact that they offered everything needed for the 2012 and up cars.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Oil Cooler, Transmission Cooler, struts, strut mounts	Mulli007	Parts for sale (Private Classifieds)	14	05-04-2018 08:42 AM
Install location of Stillen SC cooler AND Stillen Oil cooler AND ps cooler	imazman	Forced Induction	7	12-18-2016 03:15 PM
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler	matcop	Engine & Drivetrain	17	09-07-2013 10:09 AM