Is it necessary to ger an Oil Cooler?

mokhan996 · 05-15-2019, 08:11 AM

Quote:

Originally Posted by SPDKING

Check this thread out I and everyone else put together.
Must have upgrades for every 370Z

On all 370Z's, daily driven to track car, all need a oil cooler and a CSC elimination kit or a heavy duty CSC. The oil cooler was my first upgrade not a week after getting my car after it went into limp mode driving normally to my job when it was 70 degrees out. I got the Z1 34 row with Setrab and the protective wrap with the thermostatic sandwich plate even though I live in Southern California just to be safe. I would stay away from Mishimoto's products and I heard good things about the Stillen and Fast Intentions oil coolers. At this point, it's a requirement on every single 370Z to have a oil cooler.

Holy s**t, didn't think Mishimoto would ever be that bad. Yeah after talking to several people on this forum, including yourself, for sure getting the Z1.

SPDKING · 05-15-2019, 11:29 AM

Quote:

Originally Posted by mokhan996

Holy s**t, didn't think Mishimoto would ever be that bad. Yeah after talking to several people on this forum, including yourself, for sure getting the Z1.

Z1, Stillen or Fast Intentions, they all use the same stuff I think except the Stillen only has 25 row and the Fast Intentions is the cheapest. I think the Stillen is the most expensive (not by much) if you don't care about the protective hose wrapping like on the Z1. Once you get the Z1, you probably will notice the car takes a longer time for the oil to warm up (at least that's what I noticed) but I think everyone has said that's normal. You can also get the Concept Z 34 Row Oil cooler. Again, they all basically use the same things, this one is actually the same exact thing as the Z1 but you get rewards points

https://conceptzperformance.com/czp-...x4_p_32824.php

Spooler · 06-06-2019, 03:18 PM

Quote:

Originally Posted by SPDKING

Z1, Stillen or Fast Intentions, they all use the same stuff I think except the Stillen only has 25 row and the Fast Intentions is the cheapest. I think the Stillen is the most expensive (not by much) if you don't care about the protective hose wrapping like on the Z1.

No sure where you got your information. Nobody buys the Stillen kits because you can't use a factory oil filter (unless they have recently changed them). The Fast Intentions are the highest quality due to the braided lines they use (Teflon Inserts and last a long time) and they only sell a Setrab 34 row oil cooler. They also offer everything needed to remove the factory oil cooler 2012 to current car. The Z1 you can cheap out and get a Mocal oil cooler which is not as good. They also offer 19 row, 24 row, and 34 row oil coolers. The braided lines are just standard rubber lines. Nothing special.

So, the Z1 and Fast Intentions oil cooler kits are both good. If you get the Z1 make sure to get the Setrab oil cooler. I just like the FI kit better due to the
fact that they offered everything needed for the 2012 and up cars.

SPDKING · 06-06-2019, 03:47 PM

Quote:

Originally Posted by Spooler

No sure where you got your information. Nobody buys the Stillen kits because you can't use a factory oil filter (unless they have recently changed them). The Fast Intentions are the highest quality due to the braided lines they use (Teflon Inserts and last a long time) and they only sell a Setrab 34 row oil cooler. They also offer everything needed to remove the factory oil cooler 2012 to current car. The Z1 you can cheap out and get a Mocal oil cooler which is not as good. They also offer 19 row, 24 row, and 34 row oil coolers. The braided lines are just standard rubber lines. Nothing special.

So, the Z1 and Fast Intentions oil cooler kits are both good. If you get the Z1 make sure to get the Setrab oil cooler. I just like the FI kit better due to the
fact that they offered everything needed for the 2012 and up cars.

Yes there are people with the Stillen ones despite that. That was the reason why I personally didn't get the Stillen but that may not be someone else's reason. I see teenagers with the Mishimoto ones all the time too, even though it's well known the quality isn't all there. It could be timing or lack of knowledge but I've come across 6 people with the Stillen kit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Oil Cooler, Transmission Cooler, struts, strut mounts	Mulli007	Parts for sale (Private Classifieds)	14	05-04-2018 08:42 AM
Install location of Stillen SC cooler AND Stillen Oil cooler AND ps cooler	imazman	Forced Induction	7	12-18-2016 03:15 PM
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler	matcop	Engine & Drivetrain	17	09-07-2013 10:09 AM