Is it necessary to ger an Oil Cooler?

BettyZ · 05-09-2019, 12:38 PM

Quote:

Originally Posted by mokhan996

My Z's a 2013. So go with the Z1 for sure?

Yes, definitely Z1. Buy a 34 row. You can always throw on a blockoff plate in the winter.

I went with a 25 row thinking I didnt need a 34 row bc I dont track the car. A year later I ended up buying a 34 row. So save yourself the expense and go BIG.

Sent from my SM-G955U using Tapatalk

BettyZ · 05-09-2019, 12:40 PM

Quote:

Originally Posted by mokhan996

My Z's a 2013. So go with the Z1 for sure?

Since you have the stock oil cooler sandwich you'll have to use a shot oil filter if you arent already. Like Mobil1 1008A.

The longer filters can technically fit. Mine did. But I'd have to loosen the hose fittings to the thermo plate to get the filter off and a new one on. Not worth the hassle and subsequent seepage.

Sent from my SM-G955U using Tapatalk

Quicksilvers · 05-09-2019, 12:42 PM

Having had a 19 row Mishimoto oil cooler back in the day the AN fittings were anything but durable they leaked and the sandwich plate leaked over time. I have had quite a few different brand oil coolers over the years and the out of all of them the only oil cooler that I installed on my Z that never leaked was the AAM Competition S-Line oil cooler and fitment was excellent. An oil cooler is there to do one thing and that’s lower your engine oil temperatures.

BettyZ · 05-09-2019, 12:48 PM

Quote:

Originally Posted by Quicksilvers

Having had a 19 row Mishimoto oil cooler back in the day the AN fittings were anything but durable they leaked and the sandwich plate leaked over time. I have had quite a few different brand oil coolers over the years and the out of all of them the only oil cooler that I installed on my Z that never leaked was the AAM Competition S-Line oil cooler and fitment was excellent. An oil cooler is there to do one thing and that’s lower your engine oil temperatures.

I did end up swapping in Aeroquip braided stainless lines and fittings. No leaks so far but OTOH the Z hasn't been out of the garage since...

Sent from my SM-G955U using Tapatalk

Chuck33079 · 05-09-2019, 12:56 PM

Quote:

Originally Posted by Quicksilvers

Having had a 19 row Mishimoto oil cooler back in the day the AN fittings were anything but durable they leaked and the sandwich plate leaked over time. I have had quite a few different brand oil coolers over the years and the out of all of them the only oil cooler that I installed on my Z that never leaked was the AAM Competition S-Line oil cooler and fitment was excellent. An oil cooler is there to do one thing and that’s lower your engine oil temperatures.

Still sucking that AAM ****, huh? STOP GIVING ADVICE.

OP, do not listen to this guy. He is notorious around here for bad advice and blind loyalty to terrible vendors. AAM is garbage people making garbage parts. Buy your oil cooler from FI($$$), Z1($$) or piece together one with the following: DIY: Oil Cooler (scratch built install, lottsa pics).....>. .

OptionZero · 05-09-2019, 02:11 PM

Do i need to play peace maker?

mokhan996 · 05-09-2019, 02:11 PM

Quote:

Originally Posted by BettyZ

Yes, definitely Z1. Buy a 34 row. You can always throw on a blockoff plate in the winter.

I went with a 25 row thinking I didnt need a 34 row bc I dont track the car. A year later I ended up buying a 34 row. So save yourself the expense and go BIG.

Sent from my SM-G955U using Tapatalk

Now would you mind and explain what a 25 Row or 34 Row is? And where can I get a blockoff plate? I'm assuming that's just strictly for the Winter, don't want toooo low of a temp lol. Also do I HAVE to use a longer size oil filter? if so, why? And I know they should fit, like the OEM Nissan 65FOE can be swapped with the OEM 9E long filters but do the filters make a difference?

Chuck33079 · 05-09-2019, 02:14 PM

The rows are the size of the oil cooler. They seem to mostly be 19, 25 and 34 rows. You make the blockoff plate yourself. If the oil won't get warm enough, make a plate to cover part of the oil cooler in the winter.

Make sure you get one with a thermostatic sandwich plate, or the oil will never get up to temp.

Chuck33079 · 05-09-2019, 02:15 PM

Quote:

Originally Posted by OptionZero

Do i need to play peace maker?

Don't defend that retard. He's really becoming a cancer on this forum.

bunk · 05-09-2019, 02:16 PM

Quote:

Originally Posted by OptionZero

Do i need to play peace maker?

Yes

mokhan996 · 05-09-2019, 02:17 PM

Quote:

Originally Posted by Chuck33079

The rows are the size of the oil cooler. They seem to mostly be 19, 25 and 34 rows. You make the blockoff plate yourself. If the oil won't get warm enough, make a plate to cover part of the oil cooler in the winter.

Make sure you get one with a thermostatic sandwich plate, or the oil will never get up to temp.

Can I ask you what a thermostatic SANDWICH PLATE?? I'm on Z1 and theres an option to get one, what is it and what does it do? And is a blockoff plate necessary though? What would the blockoff plate do? Sorry if I'm too extra :/

Chuck33079 · 05-09-2019, 02:20 PM

The sandwich adapter goes between the oil filter and the motor, with lines running into and out of the core. That's how the cooler gets fed oil. A thermostatic sandwich plate had a temperature controlled valve in it that blocks most all of the oil flow until the oil heats up. That way it can still get up to temp. It's like the thermostat in your cooling system. The blockoff plate is only needed if the oil is getting overcooled in winter. It just covers part of the cooler to block airflow to it, and raise the temp of the oil.

bunk · 05-09-2019, 02:21 PM

Quote:

Originally Posted by mokhan996

Can I ask you what a thermostatic SANDWICH PLATE?? I'm on Z1 and theres an option to get one, what is it and what does it do? And is a blockoff plate necessary though? What would the blockoff plate do? Sorry if I'm too extra :/

A thermostatic plate is a thermostat, allows more or less oil to pass to the cooler. Just like your engine coolant termostat.

MZ DAIZY · 05-09-2019, 03:22 PM

I have a Z1 34 row with the thermostat. During the hot GA Summers I was running around 220 degrees with the stock cooler. Since the install, she runs between 180 and 190 depending on how “Spirited” I’m driving that day.

Cruising the freeway at 70 - 85 MPH in 96 degree weather is usually locked at 180 degrees.

Money well spent.

mokhan996 · 05-09-2019, 04:39 PM

Quote:

Originally Posted by Chuck33079

The sandwich adapter goes between the oil filter and the motor, with lines running into and out of the core. That's how the cooler gets fed oil. A thermostatic sandwich plate had a temperature controlled valve in it that blocks most all of the oil flow until the oil heats up. That way it can still get up to temp. It's like the thermostat in your cooling system. The blockoff plate is only needed if the oil is getting overcooled in winter. It just covers part of the cooler to block airflow to it, and raise the temp of the oil.

Okay here goes a ear full of questions haha.

-What happens if I don't run a Thermostatic Sandwich Plate?

-If I do run a Thermostatic Plate, from my understanding the Oil Filter is on the Thermo Plate, and the Thermo Plate is connected to the STOCK Oil Cooler?

-How does the Z1 Cooler work? So during the Winter how does the Z1 Cooler shut down to get up to temp? Does the stock oil cooler do the job to get it up to temp and THEN the Z1 Cooler kicks back on?

-When the Z1 Cooler shuts down, do I still have oil in and out of my oil filter? Just asking because Ive seen a picture on Google with the Lines running out of the Thermo Plate, so if it shuts down, am I "filterless" until it kicks back on when up to temp?

-Also why would I need to change Oil Filter types? Why cant I use the OE Oil Filter? And if it has to be changed, which brand filter would you recommend?
Sorry for these nonsense questions lol, gotta knowwwww

05-09-2019, 12:42 PM	#18 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25463	Having had a 19 row Mishimoto oil cooler back in the day the AN fittings were anything but durable they leaked and the sandwich plate leaked over time. I have had quite a few different brand oil coolers over the years and the out of all of them the only oil cooler that I installed on my Z that never leaked was the AAM Competition S-Line oil cooler and fitment was excellent. An oil cooler is there to do one thing and that’s lower your engine oil temperatures. __________________ Mr. Clean

05-09-2019, 02:11 PM	#21 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,231 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Do i need to play peace maker? mokhan996 likes this. __________________ OptionZero Build Thread

05-09-2019, 02:14 PM	#23 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	The rows are the size of the oil cooler. They seem to mostly be 19, 25 and 34 rows. You make the blockoff plate yourself. If the oil won't get warm enough, make a plate to cover part of the oil cooler in the winter. Make sure you get one with a thermostatic sandwich plate, or the oil will never get up to temp. mokhan996 and BettyZ like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

05-09-2019, 02:20 PM	#27 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	The sandwich adapter goes between the oil filter and the motor, with lines running into and out of the core. That's how the cooler gets fed oil. A thermostatic sandwich plate had a temperature controlled valve in it that blocks most all of the oil flow until the oil heats up. That way it can still get up to temp. It's like the thermostat in your cooling system. The blockoff plate is only needed if the oil is getting overcooled in winter. It just covers part of the cooler to block airflow to it, and raise the temp of the oil. Zyonara91, mokhan996 and BettyZ like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

05-09-2019, 03:22 PM	#29 (permalink)
MZ DAIZY A True Z Fanatic Join Date: Feb 2018 Location: Atlanta Posts: 1,851 Drives: Miss Daisy Rep Power: 613733	I have a Z1 34 row with the thermostat. During the hot GA Summers I was running around 220 degrees with the stock cooler. Since the install, she runs between 180 and 190 depending on how “Spirited” I’m driving that day. Cruising the freeway at 70 - 85 MPH in 96 degree weather is usually locked at 180 degrees. Money well spent. mokhan996 and BettyZ like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Oil Cooler, Transmission Cooler, struts, strut mounts	Mulli007	Parts for sale (Private Classifieds)	14	05-04-2018 09:42 AM
Install location of Stillen SC cooler AND Stillen Oil cooler AND ps cooler	imazman	Forced Induction	7	12-18-2016 04:15 PM
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 06:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 03:27 PM
7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler	matcop	Engine & Drivetrain	17	09-07-2013 11:09 AM