Great question...……… This did not work for me. Tried it about a half a dozen times.

http://www.the370z.com/audio-video/4...u-install.html

"****IIMPORTANT****
Turn the ignition off as soon as the airbag light goes out the first time.


If you have the airbag light blinking here is how to reset it:

1. Push the start button two times (Ignition on but engine not started).

2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off INSTANTLY.

3. Count to 5 (1 Mississippi, 2 Mississippi . . . .)

4. Repeat steps 1-3 two more times until you have done the cycle three times.

5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry.

6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing.

If it does not work the first time, just repeat the steps again.
"


Back to Google I guess. If I can't find anything that works, off to the dealer to get ripped off for 3 minutes work.


Denny

Did you try the electrical short method? There is one that uses a paperclip (or other metal means) to short the wiring and reset the light. It is certainly more involved. But way cheaper than the dealer. I've tried it - did not solve my problem but it's not impossible.

Is there a tutorial on that method? My airbag lights been on since I removed and replaced my headunit. I tried the other method a bunch of times and can only get it to go into the slow blinking stand by mode. :confused:

Well, I guess I was wrong ... I cannot seem to find it anymore. If I come across it I will post it up.

Unfortunately, I didn't see anyrhing in that thread.