Engine Ticking Noise Rythmic

BettyZ · 01-09-2019, 11:47 AM

Damn son that's a hard hit. But like you said, at least you have the oil pressure gauge! I think it would be worthwhile to have them pull the oil pump and see if it is in fact damaged and/or failing, and if so, whether the cause could be pinned down.

Sent from my SM-G955U using Tapatalk

Rusty · 01-09-2019, 12:00 PM

I'm thinking spun bearing. From low oil pressure. Just wondering if something got into the oil pump.

Years ago. I had a piece of valve seal ruin an oil pump. The motor had about 40,000 miles on it.

I was hoping things was going to work out for you with the gaskets.

Jordan12berg · 01-09-2019, 04:37 PM

If the oil pump is intact good can’t I upgrade the internals on the oil pump to perform like the nismo pump?
And my mechanic will let me back there to look at whatever so if y’all have any questions I can get back there and see what really failed.

Rusty · 01-09-2019, 04:48 PM

Don't waste your your time with the Nismo pump or up graded internals. Get a Sucker Punch pump from MAM.

Jordan12berg · 01-19-2019, 03:35 PM

They are letting me throw in the czp gallery gasket kit in the new engine, so at least I’ll have that security. Be interesting to see the new oil pressures. Government shutdown won’t allow me to do an upgraded oil pump.

Jordan12berg · 02-15-2019, 08:15 AM

So is it common for these engines to burn some oil if they had been sitting around for while?? I’m thinking no....

BettyZ · 02-15-2019, 08:31 AM

As in, it is low on oil? Or were the engine faeries burning 5w30 to keep warm at night?

Sent from my SM-G955U using Tapatalk

Jordan12berg · 02-15-2019, 08:53 AM

https://imgur.com/gallery/vVW10SV
It’s been doing this lately slowly worse. And on startup and when I rev it you can see/smell the fairies burning the 5w30 I’m about to get to work and check oil levels. This engine came with warranty which I might use because I’ve been having cylinder 5 miss fires, injector cleaner has helped reduce it. But all of the bank with 1,3,5 will sometimes miss fire.

BettyZ · 02-15-2019, 09:03 AM

I wouldn't worry too terribly about those pressure swings, mine does the same depending on how I'm accelerating. Those cylinder 5 misfires tho...

Sent from my SM-G955U using Tapatalk

Jordan12berg · 02-15-2019, 04:34 PM

Right? Surely they checked compression. We put oil back in. Oil pressure it back up and steady. Missfires aren’t too bad but still present

BettyZ · 02-15-2019, 05:13 PM

Glad to hear. In my experience, "surely they xyz..." means they sure as hell did not lol.

Sent from my SM-G955U using Tapatalk

Jordan12berg · 02-20-2019, 01:43 PM

Now I’m getting missfires only in 1 and 3 5 has been 0-2 every trip. So it’s got to be a bank issue right? I am going to clean the MAFs and make sure they aren’t lose. And look over the TBs while I’m at it.

BettyZ · 02-20-2019, 01:50 PM

That's a reasonable assumption. I'd check all the wiring connectors as well

Sent from my SM-G955U using Tapatalk

01-09-2019, 11:47 AM	#106 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Damn son that's a hard hit. But like you said, at least you have the oil pressure gauge! I think it would be worthwhile to have them pull the oil pump and see if it is in fact damaged and/or failing, and if so, whether the cause could be pinned down. Sent from my SM-G955U using Tapatalk __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

01-09-2019, 12:00 PM	#107 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I'm thinking spun bearing. From low oil pressure. Just wondering if something got into the oil pump. Years ago. I had a piece of valve seal ruin an oil pump. The motor had about 40,000 miles on it. I was hoping things was going to work out for you with the gaskets. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-09-2019, 04:48 PM	#109 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Don't waste your your time with the Nismo pump or up graded internals. Get a Sucker Punch pump from MAM. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-19-2019, 03:35 PM	#110 (permalink)
Jordan12berg Base Member Join Date: Jul 2016 Location: Atlanta GA Posts: 70 Drives: 09 370z Red M6 Rep Power: 9	They are letting me throw in the czp gallery gasket kit in the new engine, so at least I’ll have that security. Be interesting to see the new oil pressures. Government shutdown won’t allow me to do an upgraded oil pump. Rusty and Spooler like this.

02-15-2019, 08:31 AM	#112 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	As in, it is low on oil? Or were the engine faeries burning 5w30 to keep warm at night? Sent from my SM-G955U using Tapatalk __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

01-09-2019, 04:37 PM	#108 (permalink)
Jordan12berg Base Member Join Date: Jul 2016 Location: Atlanta GA Posts: 70 Drives: 09 370z Red M6 Rep Power: 9	If the oil pump is intact good can’t I upgrade the internals on the oil pump to perform like the nismo pump? And my mechanic will let me back there to look at whatever so if y’all have any questions I can get back there and see what really failed.

02-15-2019, 08:15 AM	#111 (permalink)
Jordan12berg Base Member Join Date: Jul 2016 Location: Atlanta GA Posts: 70 Drives: 09 370z Red M6 Rep Power: 9	So is it common for these engines to burn some oil if they had been sitting around for while?? I’m thinking no....

02-15-2019, 09:03 AM	#114 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	I wouldn't worry too terribly about those pressure swings, mine does the same depending on how I'm accelerating. Those cylinder 5 misfires tho... Sent from my SM-G955U using Tapatalk __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

02-15-2019, 04:34 PM	#115 (permalink)
Jordan12berg Base Member Join Date: Jul 2016 Location: Atlanta GA Posts: 70 Drives: 09 370z Red M6 Rep Power: 9	Right? Surely they checked compression. We put oil back in. Oil pressure it back up and steady. Missfires aren’t too bad but still present

02-15-2019, 05:13 PM	#116 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Glad to hear. In my experience, "surely they xyz..." means they sure as hell did not lol. Sent from my SM-G955U using Tapatalk __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

02-20-2019, 01:43 PM	#117 (permalink)
Jordan12berg Base Member Join Date: Jul 2016 Location: Atlanta GA Posts: 70 Drives: 09 370z Red M6 Rep Power: 9	Now I’m getting missfires only in 1 and 3 5 has been 0-2 every trip. So it’s got to be a bank issue right? I am going to clean the MAFs and make sure they aren’t lose. And look over the TBs while I’m at it.

02-20-2019, 01:50 PM	#118 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	That's a reasonable assumption. I'd check all the wiring connectors as well Sent from my SM-G955U using Tapatalk __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ticking noise above 45mph	owenismo	Engine & Drivetrain	1	11-21-2016 05:42 AM
Rapid clicking/ticking noise while turning all the way	YamahaR6	Nissan 370Z General Discussions	6	06-23-2014 10:06 PM
Ticking noise while shifting	ALTN8NRG	Engine & Drivetrain	4	07-01-2012 06:19 AM
Loud ticking noise from engine	Synack	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	191	03-01-2012 07:22 PM
Ticking noise	zrider	Intake/Exhaust	14	07-27-2010 04:57 PM