Coolerworx shifter

AlWakRa · 09-27-2018, 05:59 PM

Quote:

Originally Posted by scope22

Thanks, that sounds good, i have a TWM short throw shifter now and its its hard to get it in the gears, i love how close the gears are, but sucks getting in the gear, i'm going to have to get this then....

I had TWM and it was hard to get in gears, for cruising it was good, for fast shifting not as good, I returned to stock shifter with my weighted knob, and I didn't look back. Now, I am tempted to try Coolerworx, I am resisting it, but for how long idk.

Hotrodz · 09-27-2018, 07:59 PM

There really is no comparison between the two shifters. I also was using the TWM and the difference is like the description given in the one video...Nissan 370z vs Audi r8. That pretty much sums it up!

Sent from my SM-G965U using Tapatalk

Spooler · 09-27-2018, 09:46 PM

The one reason I don't have one is due to my previous short throw shifter experience. When shifting fast most of them suck. Stock works well for me, I can bang them out no problem.

Sontdp · 09-28-2018, 05:33 PM

If your coming to ZCON, we should have at least one car there with the shifter in it. Come say Hi and check it out in person.

For those that reached out about the 370Z pads, sounds like they are currently delayed. Should get an update Monday.

redondoaveb · 10-15-2018, 06:51 PM

Raceseng shift knob on Coolerworx shifter.

Spooler · 10-15-2018, 07:42 PM

Quote:

Originally Posted by redondoaveb

Raceseng shift knob on Coolerworx shifter.

Now that looks good.

redondoaveb · 10-15-2018, 09:29 PM

Quote:

Originally Posted by Spooler

Now that looks good.

Thanks, works better than it looks.

Spooler · 10-15-2018, 10:01 PM

Anyway to have the shifter made in a Nissan/Infinity thread pitch and size (M10x1.25)? I have 2- Hebi Bebi knobs I would like to use.

redondoaveb · 10-15-2018, 10:27 PM

Quote:

Originally Posted by Spooler

Anyway to have the shifter made in a Nissan/Infinity thread pitch and size (M10x1.25)? I have 2- Hebi Bebi knobs I would like to use.

I doubt if coolerworx would do it. You'd probably need to have an adapter fabricated with an M12 x 1.50 female threaded end and an M10 X 1.25 male end.

Spooler · 10-15-2018, 10:49 PM

Quote:

Originally Posted by redondoaveb

I doubt if coolerworx would do it. You'd probably need to have an adapter fabricated with an M12 x 1.50 female threaded end and an M10 X 1.25 male end.

Well see. I am not using the knobs now because of how low they will sit. I am not crazy about that. They are just very rare so why not.

Sontdp · 10-16-2018, 02:58 PM

Just got our 370Z pads/shifters in yesterday. I'm heading to the shop in the morning to get ready for ZCON I'll have some pictures posted. Given how late we got the shifters they may not be in the car(s), but I'll at least have a 350Z shifter at the booth. Still waiting on a few more, so what we got will likely get shipped to customers first.

Nik@SOHO · 10-17-2018, 02:26 PM

Nissan 370Z Pad

solidus · 10-17-2018, 04:39 PM

Quote:

Originally Posted by Nik@SOHO

Nissan 370Z Pad

Nik,
They say anything about how much those will be for us that got caught out recently and installed the 350z pad? It hurt my soul knowing I could've just bolted the thing in , but I couldn't wait.

Sontdp · 10-18-2018, 08:58 AM

Quote:

Originally Posted by solidus

Nik,
They say anything about how much those will be for us that got caught out recently and installed the 350z pad? It hurt my soul knowing I could've just bolted the thing in , but I couldn't wait.

We where told they would update us when they got caught up. Still waiting on a few 370Z ones. I have you on my list to update when they catch up and let us know.

solidus · 10-18-2018, 11:21 AM

Quote:

Originally Posted by Sontdp

We where told they would update us when they got caught up. Still waiting on a few 370Z ones. I have you on my list to update when they catch up and let us know.

Thanks, take care of your customers first but keep me in mind. I got my shifter through 9k but I'll my base from you when you get access to them.

09-27-2018, 07:59 PM	#62 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	There really is no comparison between the two shifters. I also was using the TWM and the difference is like the description given in the one video...Nissan 370z vs Audi r8. That pretty much sums it up! Sent from my SM-G965U using Tapatalk redondoaveb likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

09-27-2018, 09:46 PM	#63 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	The one reason I don't have one is due to my previous short throw shifter experience. When shifting fast most of them suck. Stock works well for me, I can bang them out no problem. AlWakRa likes this.

09-28-2018, 05:33 PM	#64 (permalink)
Sontdp Base Member Join Date: Jan 2013 Location: Charlotte Posts: 21 Drives: 08 G37 S A5 Rep Power: 12	If your coming to ZCON, we should have at least one car there with the shifter in it. Come say Hi and check it out in person. For those that reached out about the 370Z pads, sounds like they are currently delayed. Should get an update Monday. Rusty, Hotrodz, Spooler and 1 others like this.

10-15-2018, 10:01 PM	#68 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Anyway to have the shifter made in a Nissan/Infinity thread pitch and size (M10x1.25)? I have 2- Hebi Bebi knobs I would like to use. redondoaveb likes this. Last edited by Spooler; 10-15-2018 at 10:17 PM.

10-16-2018, 02:58 PM	#71 (permalink)
Sontdp Base Member Join Date: Jan 2013 Location: Charlotte Posts: 21 Drives: 08 G37 S A5 Rep Power: 12	Just got our 370Z pads/shifters in yesterday. I'm heading to the shop in the morning to get ready for ZCON I'll have some pictures posted. Given how late we got the shifters they may not be in the car(s), but I'll at least have a 350Z shifter at the booth. Still waiting on a few more, so what we got will likely get shipped to customers first. Hotrodz, madwi and redondoaveb like this.

10-17-2018, 02:26 PM	#72 (permalink)
Nik@SOHO Base Member Join Date: Feb 2013 Location: Charlotte Posts: 234 Drives: 14 Nismo 370Z Rep Power: 10078	Nissan 370Z Pad JARblue, Rusty, Hotrodz and 3 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: TWM Short Shifter and Leather Shifter Boot	GaleForce	DIY Section (Do-It-Yourself)	84	04-11-2018 05:42 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 10:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 07:57 AM
[FOR SALE] OEM shifter	bkngo	Parts for sale (Private Classifieds)	3	06-19-2015 08:13 PM
shifter	z34/35	Engine & Drivetrain	2	07-24-2009 06:57 AM