Coolerworx shifter

NorthStyle · 09-23-2018, 07:25 PM

My bad, it's a M12x1.5 according to the Soho page (https://sohomotorsports.com/product/...ter-350z-370z/). Thought I had written that in my notes buuuuuut guess not. Not sure where I got M14 from...

redondoaveb · 09-23-2018, 08:05 PM

Quote:

Originally Posted by NorthStyle

My bad, it's a M12x1.5 according to the Soho page (https://sohomotorsports.com/product/...ter-350z-370z/). Thought I had written that in my notes buuuuuut guess not. Not sure where I got M14 from...

I purchased an M12 X 1.5 insert for my Raceseng shift knob and tried it but it didn't work. I then tried an M12 X 1.25 and an M12 X 1.75 nut and they didn't work either.

I'm at a loss, hopefully Coolerworx can clarify this.

redondoaveb · 09-24-2018, 05:21 PM

Mystery solved on the thread pitch. I received an email from Coolerworx this morning and he verified the M12 X 1.50 thread pitch. With that info I took an M12 X 1.50 die and cleaned up the first couple of threads and it's fine now. Apparently when the existing knob got tightened down it compressed the first couple of threads. I can see how that can easily happen with the design of the existing knob mounting design.

Sontdp · 09-25-2018, 03:46 PM

Quote:

Originally Posted by redondoaveb

Mystery solved on the thread pitch. I received an email from Coolerworx this morning and he verified the M12 X 1.50 thread pitch. With that info I took an M12 X 1.50 die and cleaned up the first couple of threads and it's fine now. Apparently when the existing knob got tightened down it compressed the first couple of threads. I can see how that can easily happen with the design of the existing knob mounting design.

Post pictures! Curious to see it with a different knob and people always ask. Love my raceseng shift knob.

redondoaveb · 09-25-2018, 04:19 PM

Quote:

Originally Posted by Sontdp

Post pictures! Curious to see it with a different knob and people always ask. Love my raceseng shift knob.

I haven't driven the car yet (goes in for tune next week) but just sitting in it and going through the gears, the stock knob did feel good. One issue I might have with it and like I've had with other metal knobs is they get extremely hot in our So. Cal. sun. I'll install the one I purchased and post some pics when I get my car back next week.

csnow · 09-26-2018, 06:30 PM

Quote:

Originally Posted by redondoaveb

I haven't driven the car yet (goes in for tune next week) but just sitting in it and going through the gears, the stock knob did feel good. One issue I might have with it and like I've had with other metal knobs is they get extremely hot in our So. Cal. sun. I'll install the one I purchased and post some pics when I get my car back next week.

Covercraft UVS line of sunshades are amazing fit and quality. You can throw a sock on the shifter when parked. Highly recommend some good tint if you are into that to top it off. Problem solved

Sontdp · 09-27-2018, 11:34 AM

At the shop today, confirmed with Matt our next order of shifters will have the updated 370Z pads. When they come in I'll post some pictures and update the product page.

redondoaveb · 09-27-2018, 11:55 AM

Quote:

Originally Posted by Sontdp

At the shop today, confirmed with Matt our next order of shifters will have the updated 370Z pads. When they come in I'll post some pictures and update the product page.

Will the new pads be available to those of us that have purchased the shifter with the 350Z pads?

scope22 · 09-27-2018, 12:03 PM

is this any less notchy then other short throw shifters?

Sontdp · 09-27-2018, 12:10 PM

Quote:

Originally Posted by redondoaveb

Will the new pads be available to those of us that have purchased the shifter with the 350Z pads?

We will ask coolerworkx. If you have already installed it, would just be more for resale if you wanted to sale to a 370Z down the road from my understanding.

Quote:

Originally Posted by scope22

is this any less notchy then other short throw shifters?

So notchy to me has more to do with being difficult to get into gear. I don't have those problems with the shifter that I had with other short shifters. I would say it does have a very mechanical feel, that can sometimes be confused with notchy though. Check out the video below if you haven't seen it.

Start at 1:57 to miss me awkwardly explaining new features on the website.

redondoaveb · 09-27-2018, 12:42 PM

Quote:

Originally Posted by scope22

is this any less notchy then other short throw shifters?

As Sontbp mentioned, it is a mechanical feel. I had described it as notchy in one of my posts. That may be the wrong way to describe it. It clicks into gear with no effort unlike some of the short shifters on the market that take force to get them to engage. That's why some people use a weighted shift knob on their short shifters. I would call the Coolerworx shifter a race shifter that works great for street use also.

If you want a shifter that has the stock feel then this shifter isn't for you. If you want a shifter that gives a super short throw and positive engagement shifts then the Coolerworx is no doubt the best on the market.

Hotrodz · 09-27-2018, 01:53 PM

Quote:

Originally Posted by Sontdp

We will ask coolerworkx. If you have already installed it, would just be more for resale if you wanted to sale to a 370Z down the road from my understanding.

So notchy to me has more to do with being difficult to get into gear. I don't have those problems with the shifter that I had with other short shifters. I would say it does have a very mechanical feel, that can sometimes be confused with notchy though. Check out the video below if you haven't seen it.

Start at 1:57 to miss me awkwardly explaining new features on the website.

Quote:

Originally Posted by redondoaveb

As Sontbp mentioned, it is a mechanical feel. I had described it as notchy in one of my posts. That may be the wrong way to describe it. It clicks into gear with no effort unlike some of the short shifters on the market that take force to get them to engage. That's why some people use a weighted shift knob on their short shifters. I would call the Coolerworx shifter a race shifter that works great for street use also.

If you want a shifter that has the stock feel then this shifter isn't for you. If you want a shifter that gives a super short throw and positive engagement shifts then the Coolerworx is no doubt the best on the market.

Agreed! I explained in my short review of it as being notchy and mechanical. The shifter provides a lot of feel and feedback. I really like the resistance of mechanical feel with each throw regardless of up or down shifts. If you miss a gear during a shift...well that would be user error in a major way. If you track (drag or circuit) you definitely want one of these bad boys!

Sent from my SM-G965U using Tapatalk

scope22 · 09-27-2018, 02:59 PM

Thanks, that sounds good, i have a TWM short throw shifter now and its its hard to get it in the gears, i love how close the gears are, but sucks getting in the gear, i'm going to have to get this then....

redondoaveb · 09-27-2018, 03:15 PM

Quote:

Originally Posted by scope22

Thanks, that sounds good, i have a TWM short throw shifter now and its its hard to get it in the gears, i love how close the gears are, but sucks getting in the gear, i'm going to have to get this then....

I was using the TWM also. Night and day difference.

Rusty · 09-27-2018, 04:05 PM

Quote:

Originally Posted by scope22

Thanks, that sounds good, i have a TWM short throw shifter now and its its hard to get it in the gears, i love how close the gears are, but sucks getting in the gear, i'm going to have to get this then....

Mine pops right in.

09-24-2018, 05:21 PM	#48 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,361 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	Mystery solved on the thread pitch. I received an email from Coolerworx this morning and he verified the M12 X 1.50 thread pitch. With that info I took an M12 X 1.50 die and cleaned up the first couple of threads and it's fine now. Apparently when the existing knob got tightened down it compressed the first couple of threads. I can see how that can easily happen with the design of the existing knob mounting design. Hotrodz and Sontdp like this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

09-27-2018, 11:34 AM	#52 (permalink)
Sontdp Base Member Join Date: Jan 2013 Location: Charlotte Posts: 21 Drives: 08 G37 S A5 Rep Power: 12	At the shop today, confirmed with Matt our next order of shifters will have the updated 370Z pads. When they come in I'll post some pictures and update the product page. Rusty and redondoaveb like this.

09-27-2018, 02:59 PM	#58 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	Thanks, that sounds good, i have a TWM short throw shifter now and its its hard to get it in the gears, i love how close the gears are, but sucks getting in the gear, i'm going to have to get this then.... redondoaveb likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: TWM Short Shifter and Leather Shifter Boot	GaleForce	DIY Section (Do-It-Yourself)	84	04-11-2018 05:42 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 10:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 07:57 AM
[FOR SALE] OEM shifter	bkngo	Parts for sale (Private Classifieds)	3	06-19-2015 08:13 PM
shifter	z34/35	Engine & Drivetrain	2	07-24-2009 06:57 AM

09-23-2018, 07:25 PM	#46 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,256 Drives: 2011 370Z Nismo Rep Power: 24277	My bad, it's a M12x1.5 according to the Soho page (https://sohomotorsports.com/product/...ter-350z-370z/). Thought I had written that in my notes buuuuuut guess not. Not sure where I got M14 from...

09-27-2018, 12:03 PM	#54 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	is this any less notchy then other short throw shifters?