Coolerworx shifter

redondoaveb · 09-08-2018, 06:13 PM

Quote:

Originally Posted by Rusty

How's it feel driving?

The car just got finished up with all my sc mods so he was only able to drive it slow at low boost (wastegate spring, 7psi), but he loved it! FWIW, he's a pro drift racer and is ordering one for his car after driving mine.It has to go to Seb for re-tune before it can really get tested. I haven't been over to drive it as I've been really sick (gastritis flare up).

cv129 · 09-08-2018, 06:38 PM

That's some high praise from the mechanic, congrats!

Sontdp · 09-20-2018, 03:57 PM

Quote:

Originally Posted by redondoaveb

Shifter review from my mechanic.
https://www.instagram.com/p/BnewnsHA...d=ffarbjtte7lz

Thanks for sharing, great to hear the feedback from other mechanics.

Continue to get really good feedback from everyone who has installed these so far. Hoping to get a carbon version soon for the Z/G shifter

Hotrodz · 09-22-2018, 11:04 AM

I had to jump on the bandwagon and purchased one of those bad boys. It was installed yesterday and the mechanic/shop owner said that he is extremely jealous that there is not such a set up for his s2k. He said that he might just by a 370z just for the shifter lol. I did a couple of short runs and it is amazing. It will take some getting use to as the throws are really short and it kind of feels like it is not in gear because I was trying to push of pull the shifter further than it needs to go. The feed back incredible as it is notchy and mechanical in a good way. You can feel and hear it in gage each gear. I can't wait to get it off the trailer and spend some time getting use to it and dialing in my shifting.

Sent from my SM-G965U using Tapatalk

redondoaveb · 09-22-2018, 01:40 PM

Quote:

Originally Posted by Hotrodz

I had to jump on the bandwagon and purchased one of those bad boys. It was installed yesterday and the mechanic/shop owner said that he is extremely jealous that there is not such a set up for his s2k. He said that he might just by a 370z just for the shifter lol. I did a couple of short runs and it is amazing. It will take some getting use to as the throws are really short and it kind of feels like it is not in gear because I was trying to push of pull the shifter further than it needs to go. The feed back incredible as it is notchy and mechanical in a good way. You can feel and hear it in gage each gear. I can't wait to get it off the trailer and spend some time getting use to it and dialing in my shifting.

Sent from my SM-G965U using Tapatalk

Rusty · 09-22-2018, 05:23 PM

Quote:

Originally Posted by Hotrodz

I had to jump on the bandwagon and purchased one of those bad boys. It was installed yesterday and the mechanic/shop owner said that he is extremely jealous that there is not such a set up for his s2k. He said that he might just by a 370z just for the shifter lol. I did a couple of short runs and it is amazing. It will take some getting use to as the throws are really short and it kind of feels like it is not in gear because I was trying to push of pull the shifter further than it needs to go. The feed back incredible as it is notchy and mechanical in a good way. You can feel and hear it in gage each gear. I can't wait to get it off the trailer and spend some time getting use to it and dialing in my shifting.

Sent from my SM-G965U using Tapatalk

BOBBY!!!! What are you doing to me!!!!!!!!!!!!!!!!!

Hotrodz · 09-22-2018, 07:18 PM

Quote:

Originally Posted by Rusty

BOBBY!!!! What are you doing to me!!!!!!!!!!!!!!!!!

Just helping you spend more money. You got to get one my brother!

Sent from my SM-G965U using Tapatalk

Rusty · 09-22-2018, 07:22 PM

Quote:

Originally Posted by Hotrodz

Just helping you spend more money. You got to get one my brother!

Sent from my SM-G965U using Tapatalk

Waiting on your full report.

Hotrodz · 09-22-2018, 07:34 PM

Quote:

Originally Posted by Rusty

Waiting on your full report.

Copy that...soon!

Sent from my SM-G965U using Tapatalk

Spooler · 09-22-2018, 08:35 PM

Quote:

Originally Posted by Rusty

BOBBY!!!! What are you doing to me!!!!!!!!!!!!!!!!!

LOL, just too funny.

Spooler · 09-23-2018, 03:59 PM

Rusty, do you have a shifter on order now? Just wondering. I am waiting for a bit. I have a big bill coming up real soon. LOL

Rusty · 09-23-2018, 04:42 PM

Quote:

Originally Posted by Spooler

Rusty, do you have a shifter on order now? Just wondering. I am waiting for a bit. I have a big bill coming up real soon. LOL

No. Waiting to see if they will make the one piece to fit the 370.

redondoaveb · 09-23-2018, 05:48 PM

Quote:

Originally Posted by Rusty

No. Waiting to see if they will make the one piece to fit the 370.

They've already sent a prototype plate to one of the members for fitting. They should be in fabrication soon. Since all that is needed to be done to use the 350z plate is drilling four new holes in the trans tunnel I decided not to wait.

The only issue I have with mine is that I wanted to try an aftermarket shift knob and the shifter was suppose to be M12 X 1.50 thread pitch. I tried an M12 X 1.50, M12 X 1.25 and an M12 X 1.75 nut and none of the 3 would thread on. I contacted Matt at SOHO and he is contacting Coolerworx to see if he can find out what the thread pitch actually is.

NorthStyle · 09-23-2018, 06:08 PM

It's a M14xsomething... I covered it in the installation part of the thread Soho started.

redondoaveb · 09-23-2018, 06:42 PM

Quote:

Originally Posted by NorthStyle

It's a M14xsomething... I covered it in the installation part of the thread Soho started.

I can't find that info in the other thread.

09-08-2018, 06:38 PM	#32 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,223 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	That's some high praise from the mechanic, congrats! redondoaveb likes this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

09-22-2018, 11:04 AM	#34 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I had to jump on the bandwagon and purchased one of those bad boys. It was installed yesterday and the mechanic/shop owner said that he is extremely jealous that there is not such a set up for his s2k. He said that he might just by a 370z just for the shifter lol. I did a couple of short runs and it is amazing. It will take some getting use to as the throws are really short and it kind of feels like it is not in gear because I was trying to push of pull the shifter further than it needs to go. The feed back incredible as it is notchy and mechanical in a good way. You can feel and hear it in gage each gear. I can't wait to get it off the trailer and spend some time getting use to it and dialing in my shifting. Sent from my SM-G965U using Tapatalk AlWakRa, JARblue, cv129 and 7 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

09-23-2018, 03:59 PM	#41 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Rusty, do you have a shifter on order now? Just wondering. I am waiting for a bit. I have a big bill coming up real soon. LOL Rusty and Hotrodz like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: TWM Short Shifter and Leather Shifter Boot	GaleForce	DIY Section (Do-It-Yourself)	84	04-11-2018 05:42 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 10:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 07:57 AM
[FOR SALE] OEM shifter	bkngo	Parts for sale (Private Classifieds)	3	06-19-2015 08:13 PM
shifter	z34/35	Engine & Drivetrain	2	07-24-2009 06:57 AM

09-23-2018, 06:08 PM	#44 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,256 Drives: 2011 370Z Nismo Rep Power: 24277	It's a M14xsomething... I covered it in the installation part of the thread Soho started.