Nissan 370Z Forum  

Running lean under boost

Originally Posted by shadow85 My Ecutek log shows my injector duty cycle only reaches 50-60% under load, does that mean I still have a bit of room left in my

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain


Like Tree7Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 07-18-2018, 01:09 AM   #1 (permalink)
Track Member
 
Jinxx's Avatar
 
Join Date: Dec 2015
Location: South Carolina
Posts: 699
Drives: 2017 nismo 370z
Rep Power: 3376
Jinxx has a reputation beyond reputeJinxx has a reputation beyond reputeJinxx has a reputation beyond reputeJinxx has a reputation beyond reputeJinxx has a reputation beyond reputeJinxx has a reputation beyond reputeJinxx has a reputation beyond reputeJinxx has a reputation beyond reputeJinxx has a reputation beyond reputeJinxx has a reputation beyond reputeJinxx has a reputation beyond repute
Default

Quote:
Originally Posted by shadow85 View Post
My Ecutek log shows my injector duty cycle only reaches 50-60% under load, does that mean I still have a bit of room left in my injectors?

Also interestingly, on another log I took the other night of a semi-pull in 2nd gear, 'Injectory Duty Bank 1' dropped from 50 to almost 0 momentarily. But I think that may be another issue altogether that Seb has said may be a failsafe map dropping the throttle, which he has adjusted and sent another tune through, I have not tested that new tune but will do tonight. See below:




Yes I did the mini pressure gauge. That is why I am taking it for a run on the dyno on Monday to see if it is holding pressure under load.




Yes I have the return kit. Well I will check the pressure under boost on the dyno, see if it is increasing. It started doing this possibly the moment I got the build done and tried my first WOT pull.

The workshop it was at, said they done a leak test accross the fuel system, tensioned all lines and could not find amy faults?
I would verify the vacuum source to the regulator and make sure there isn’t any leaks ...you should see around 52 at idle and for every pound of boost it should increase one psi per pound ... on average.. depending on injector size a tune
May be different with e85 tho ... I’m speaking from 93 oct settings .... but either way idle should be 52 ish and it should increase with boost
Jinxx is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OBD codes for running lean DeliriousClam Intake/Exhaust 23 04-25-2019 01:48 PM
Uprev tuned but running lean Kamillio Tuning 11 05-05-2016 08:55 AM
Running too lean? Paskii Intake/Exhaust 21 04-11-2012 01:17 PM
CBE=lean running.? Chan Chee Hoe Intake/Exhaust 3 10-14-2010 10:27 AM
Running too lean? G37Sam Tuning 21 06-01-2010 10:25 AM


All times are GMT -5. The time now is 06:37 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2