First Track day with OS Giken LSD and extreme noise

CJBinder · 06-07-2018, 09:16 AM

Quote:

Originally Posted by Justint5387

This sounds more like an install issue than a diff issue. A few clutch plates should not generate that much heat to melt a bushing. Sounds like the gears were working way too hard.

So Z1 is having me replace the melted Whiteline Bushing with their Z1 Solid Bushing. I have since replaced the fluid and added friction modifier per Z1. Next I will be taking back to the track and testing the temp after 8 laps as well as verifying it is even locking up.

B&W_Evader · 06-07-2018, 09:48 AM

Dude...

DIY Yaw Sensor rocker switch

Don't forget to do this! It's a big deal. It costs like $15.

Hotrodz · 06-07-2018, 09:58 AM

Quote:

Originally Posted by B&W_Evader

Dude...

DIY Yaw Sensor rocker switch

Don't forget to do this! It's a big deal. It costs like $15.

Yep and always turn the vdc off. I hate it when I forget to do it as the F-ing nannies kick in even on hard acceleration.

B&W_Evader · 06-07-2018, 10:25 AM

Yeah, the car won't try to kill you any more.

Spooler · 06-07-2018, 12:43 PM

Quote:

Originally Posted by B&W_Evader

Yeah, the car won't try to kill you any more.

Amen to that. I hate those stupid nannies.

Martijn_b · 06-09-2018, 07:17 AM

So even when you turn the traction controll off, this YAW sensor which notices if the car is sliding is still activated? And it may activate a rear brake caliper when accelerating out of a turn on track?

Verstuurd vanaf mijn SM-G950F met Tapatalk

gomer_110 · 06-09-2018, 09:23 AM

Quote:

Originally Posted by Martijn_b

So even when you turn the traction controll off, this YAW sensor which notices if the car is sliding is still activated? And it may activate a rear brake caliper when accelerating out of a turn on track?

Verstuurd vanaf mijn SM-G950F met Tapatalk

YES. Disabled the one in my autox car last year after I finally had enough of it interfering.

Hotrodz · 06-09-2018, 09:46 AM

Quote:

Originally Posted by Martijn_b

So even when you turn the traction controll off, this YAW sensor which notices if the car is sliding is still activated? And it may activate a rear brake caliper when accelerating out of a turn on track?

Verstuurd vanaf mijn SM-G950F met Tapatalk

I am tuned with EcuTek and the traction control function takes care of all of that.

CJBinder · 06-22-2018, 07:17 AM

Just an update. After installing Z1 Solid Aluminum Bushings the issue with the differential no longer exists. Last track day was extremely fun and enjoyable. Well at least until I got to 3/4 gas in the tank. Next up Anti-Fuel Starvation kit.

Rusty · 06-22-2018, 08:07 AM

So the problem was the diff bouncing around because the diff bushing melted.

CJBinder · 06-22-2018, 09:35 AM

Quote:

Originally Posted by Rusty

So the problem was the diff bouncing around because the diff bushing melted.

Yes sir. I had originally bought the Whiteline Bushing kit. Maybe defective bushing or that style of bushing doesn’t work well with LTH and Clutch Type Diff? Temp of LSD after same amount of laps as day of issue was 240 degrees which I was told is just fine.

Sent from my iPhone using Tapatalk

Elmo370z · 06-22-2018, 10:56 AM

Quote:

Originally Posted by CJBinder

Just an update. After installing Z1 Solid Aluminum Bushings the issue with the differential no longer exists. Last track day was extremely fun and enjoyable. Well at least until I got to 3/4 gas in the tank. Next up Anti-Fuel Starvation kit.

Rrp

Rusty · 06-22-2018, 11:50 AM

Quote:

Originally Posted by CJBinder

Yes sir. I had originally bought the Whiteline Bushing kit. Maybe defective bushing or that style of bushing doesn’t work well with LTH and Clutch Type Diff? Temp of LSD after same amount of laps as day of issue was 240 degrees which I was told is just fine.

Sent from my iPhone using Tapatalk

Mine gets up to 255. Then I turn the diff cooler on.

CJBinder · 06-22-2018, 11:58 AM

Quote:

Originally Posted by Rusty

Mine gets up to 255. Then I turn the diff cooler on.

I probably will get the diff cooler next after fuel starvation kit

Sent from my iPhone using Tapatalk

Spooler · 06-22-2018, 01:11 PM

Glad you got her fixed up.

06-07-2018, 09:48 AM	#32 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 387	Dude... DIY Yaw Sensor rocker switch Don't forget to do this! It's a big deal. It costs like $15. DarkJak, Hotrodz and Spooler like this. __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

06-07-2018, 10:25 AM	#34 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 387	Yeah, the car won't try to kill you any more. beauz, Hotrodz, Spooler and 1 others like this. __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

06-09-2018, 07:17 AM	#36 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	So even when you turn the traction controll off, this YAW sensor which notices if the car is sliding is still activated? And it may activate a rear brake caliper when accelerating out of a turn on track? Verstuurd vanaf mijn SM-G950F met Tapatalk __________________ Instagram: Boosted_Fairlady

06-22-2018, 07:17 AM	#39 (permalink)
CJBinder Enthusiast Member Join Date: May 2010 Location: Omaha NE Posts: 272 Drives: 09 370Z PG M6 Rep Power: 25	Just an update. After installing Z1 Solid Aluminum Bushings the issue with the differential no longer exists. Last track day was extremely fun and enjoyable. Well at least until I got to 3/4 gas in the tank. Next up Anti-Fuel Starvation kit. B&W_Evader likes this. __________________ Injen cold air intakes, Ported upper and lower manifolds, OS Giken LSD, F1 Long Tube Headers, Magnaflow CBE. Natural Baby

06-22-2018, 08:07 AM	#40 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,221 Drives: 2011 Nismo GM 6M Rep Power: 2684438	So the problem was the diff bouncing around because the diff bushing melted. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-22-2018, 01:11 PM	#45 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Glad you got her fixed up. CJBinder likes this. Last edited by Spooler; 06-25-2018 at 11:48 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New OS Giken LSD - Weird Noise???	CJBinder	Engine & Drivetrain	11	05-22-2018 03:09 PM
2013 Nissan Competition presented by Corner3 Garage and Extreme speed track events!	corner3garage	Track / Autocross / Drifting / Dragstrip	154	02-13-2014 03:03 PM
2012 Z/G Competition Presented by Corner3 Garage and Extreme Speed Track Events!	corner3garage	Track / Autocross / Drifting / Dragstrip	132	01-17-2013 09:52 PM
2012 Z/G Competition Presented by Corner3 Garage and Extreme Speed Track Events!	corner3garage	Southern California Region	2	01-13-2012 01:36 AM
Extreme Speed Track Events	adampetrasek	Southern California Region	1	05-16-2011 01:32 PM