So I read about a few people having the csc issue. How many people on here have never experienced this and still on the original clutch slave/master cylinder? I don’t
|
|
LinkBack | Thread Tools | Display Modes |
05-15-2018, 10:42 PM | #1 (permalink) |
A True Z Fanatic
Join Date: Feb 2015
Location: 813
Posts: 3,915
Drives: 13 Z
Rep Power: 502909 |
Question About The Clutch
So I read about a few people having the csc issue. How many people on here have never experienced this and still on the original clutch slave/master cylinder?
I don’t daily my Z and is a ‘13 with 29k miles.
__________________
Don't like what I post? Too bad. I really don't give a sh!t |
05-15-2018, 11:33 PM | #2 (permalink) |
Base Member
Join Date: Nov 2010
Location: Cedar Rapids, Iowa
Posts: 144
Drives: 2010 370Z Blue 6MT
Rep Power: 14 |
I have a 2010 with 33k miles and haven't had any problems yet. I am keeping my fingers crossed. I did have problems with 2nd and 5th gear synchros going bad. Nissan was nice and replaced my transmission under warranty.
|
05-16-2018, 01:48 PM | #3 (permalink) |
Base Member
Join Date: Oct 2013
Location: Gold Coast
Posts: 219
Drives: 2010 370z MT/ST/Navi
Rep Power: 2868 |
2010 with 60k on the clock. Not my daily. No CSC issues so far, but I have replaced the clutch and trans fluid every 30k for good measure.
__________________
True sports-cars have two seats. I like my cars like my women, Asian imports. |
05-16-2018, 03:53 PM | #4 (permalink) |
Premium Member
Join Date: Oct 2013
Location: Los Feliz, Ca.
Posts: 1,212
Drives: '10-Sport-M6
Rep Power: 8240 |
After swapping out the fluid for the GTR stuff haven't had a problem. Still running the OEM CSC
__________________
How far, this...Utopia? F.I. CBE V2/Stillen G3 CAI/GTM 25R OC/EcuTek tune (Specialty Z)/ KW V3's/Stillen Sway bars/SPC rear camber kit/Z1 FUCA/Mich. PSS4S 255/35-295/30 |
05-16-2018, 04:21 PM | #5 (permalink) |
A True Z Fanatic
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440 |
I went 51K miles before changing out my working slave cylinder for an aftermarket one. Mind you I had 3 master cylinders fail in that time period.
__________________
2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed | |
05-18-2018, 11:30 AM | #7 (permalink) |
A True Z Fanatic
Join Date: Aug 2013
Location: Shawnee KS
Posts: 5,698
Drives: 15 Magma Red 6MT
Rep Power: 2684377 |
66k on original CMC & CSC. I have a new clutch assembly, CMC & CSC standing by...
__________________
2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/ |
05-18-2018, 11:33 AM | #8 (permalink) |
Base Member
Join Date: May 2015
Location: Ontario, Ca
Posts: 19
Drives: 2015 370Z MT6
Rep Power: 10 |
2015 43k miles no csc issues so far
__________________
370z 6MT//Midnight Blue//Ecutek Tuned by Seb//Stillen Gen 3 Intakes//Fast Intentions Catback Exhaust w/12" resonators//Fast Intentions Resonated High Flow Cats//Michelin Pilot Super Sports 245/265//Quaife ATB Helical LSD Differential//Setrab 25 row oil cooler |
05-21-2018, 08:04 AM | #12 (permalink) | |
A True Z Fanatic
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440 |
Quote:
FWIW, both of my Z key fobs are still on the original batteries from 2011.
__________________
2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed | |
|
05-22-2018, 02:17 AM | #13 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,173
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
2011, 34,000 plus miles. Mine gets pounded on. Still stock.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
05-25-2018, 09:22 AM | #14 (permalink) |
A True Z Fanatic
Join Date: Jun 2017
Location: Media, PA
Posts: 4,074
Drives: 14 Nissan 370z MR M6
Rep Power: 2684370 |
2014, just hit 40k. Still stock.
__________________
2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold) |
05-27-2018, 10:17 PM | #15 (permalink) |
Base Member
Join Date: Apr 2012
Location: Iowa
Age: 56
Posts: 28
Drives: 16 Black NISMO M6
Rep Power: 3368 |
2016 Nismo with 3000 mi CSC failed
My 2016 Nismo CSC failed with only 3000 miles, pretty disappointing, but the good news is Nissan replaced it and CMC both for no charge and paid for flatbed trailer. I was lucky that it broke and leaked out in my garage on a Saturday. The worst part was that Nissan road side assistance sent 3 regular tow trucks despite telling them I would need a flat bed, nobody wanted to touch that car, but then I finally found a company that would and they stair stepped 2x12 boards to avoid bottoming out the front end. Did a great job.
Now my sychrorev won't turn off. Will probably take it back to Nissan to have fixed. Anyone have experience with that? I would have thought that if it wasn't hooked back up right it would be stuck off, but I think the computer just remembers the last set was on, so not having the button hooked up it is now stuck on??? |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CSC and a clutch question? | 209Z | Engine & Drivetrain | 5 | 05-27-2015 07:58 AM |
CSC and a Clutch question? | 209Z | Nissan 370Z General Discussions | 26 | 04-20-2015 08:10 AM |
Clutch SC question | ocfoilist | Nissan 370Z General Discussions | 5 | 11-14-2013 08:08 PM |
Clutch Question | 370guy | Engine & Drivetrain | 6 | 02-22-2012 12:26 AM |
Clutch Question | kkruel55 | Engine & Drivetrain | 2 | 06-18-2010 07:00 PM |