Stage 2 Limp Mode after changing clutch/flywheel

mikey1600 · 02-23-2018, 04:28 AM

Hey guys,

so recently I had changed my clutch/flywheel and it's at the tuners at the moment and they are having issues with it, car won't rev over 3500RPM and timing is locked on 25deg, done some googling and found this is some stage 2 limp mode apparently sometimes caused when changing the flywheel.

Has anyone else encountered this and found an easy fix? Is the flywheel possibly just not compatible or is there some sort or refresh/relearn setting that needs to be done from a Nissan Dealer?

Any help greatly appreciated!

elhombre · 02-23-2018, 08:13 AM

Have you ensured that the crank position sensor wasn't damaged putting the transmission back in? That would be were I would look first if you are having issues after that install. I would also make sure that you installed the flywheel correctly.

mikey1600 · 02-24-2018, 05:55 AM

Quote:

Originally Posted by elhombre

Have you ensured that the crank position sensor wasn't damaged putting the transmission back in? That would be were I would look first if you are having issues after that install. I would also make sure that you installed the flywheel correctly.

No idea to be honest, didn't install it myself, I'll pass this on to the tuning workshop to take a look at. Appreciate your input!

Anyone else have the same issue?

mikey1600 · 03-09-2018, 06:42 AM

So crank sensor made no difference, it had metal shavings in it though when they pulled it off to check it originally, no idea how..

so we have no pulled the box, contacting the clutch company about the flywheel.. keep you guys posted, anyone else chime in if you've had the issue please, this is beyond annoying, cars been off the road over 9 months now.

PJMilton · 04-16-2019, 06:54 AM

Quote:

Originally Posted by mikey1600

So crank sensor made no difference, it had metal shavings in it though when they pulled it off to check it originally, no idea how..

so we have no pulled the box, contacting the clutch company about the flywheel.. keep you guys posted, anyone else chime in if you've had the issue please, this is beyond annoying, cars been off the road over 9 months now.

Did you get it figured out? I have a similar issue and have shop pulling flywheel today to see if I misaligned it when I did the install. Thanks!

Sent from my Pixel 3 using Tapatalk

SPDKING · 04-16-2019, 01:36 PM

Quote:

Originally Posted by PJMilton

Did you get it figured out? I have a similar issue and have shop pulling flywheel today to see if I misaligned it when I did the install. Thanks!

Sent from my Pixel 3 using Tapatalk

What was the clutch and flywheel that you guys got?

02-23-2018, 04:28 AM	#1 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 16	Stage 2 Limp Mode after changing clutch/flywheel Hey guys, so recently I had changed my clutch/flywheel and it's at the tuners at the moment and they are having issues with it, car won't rev over 3500RPM and timing is locked on 25deg, done some googling and found this is some stage 2 limp mode apparently sometimes caused when changing the flywheel. Has anyone else encountered this and found an easy fix? Is the flywheel possibly just not compatible or is there some sort or refresh/relearn setting that needs to be done from a Nissan Dealer? Any help greatly appreciated!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
S-Mode Warning Light after new Southbend Clutch/Flywheel installed	Hatsuongmai	Engine & Drivetrain	8	05-13-2015 06:08 PM
[FOR SALE] Used - Southbend Stage 3.5 Clutch and Flywheel	esfourteen	Parts for sale (Private Classifieds)	8	10-11-2014 02:21 PM
[FOR SALE] Spec stage 2+ clutch and flywheel	blackonorange	Parts for sale (Private Classifieds)	10	07-29-2013 04:47 PM
[FOR SALE] Exedy Clutch + Flywheel Stage 1 NEW	modme	Parts for sale (Private Classifieds)	3	11-21-2011 01:03 AM

02-23-2018, 08:13 AM	#2 (permalink)
elhombre Base Member Join Date: Feb 2016 Location: CT Posts: 93 Drives: 2009 370z Rep Power: 145	Have you ensured that the crank position sensor wasn't damaged putting the transmission back in? That would be were I would look first if you are having issues after that install. I would also make sure that you installed the flywheel correctly.

03-09-2018, 06:42 AM	#4 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 16	So crank sensor made no difference, it had metal shavings in it though when they pulled it off to check it originally, no idea how.. so we have no pulled the box, contacting the clutch company about the flywheel.. keep you guys posted, anyone else chime in if you've had the issue please, this is beyond annoying, cars been off the road over 9 months now.