09-15-2022, 02:29 AM
|
#1 (permalink)
|
|
Track Member
Join Date: Dec 2009
Location: Farmington, Utah
Posts: 582
Drives: 14 SR 370z 6MT
Rep Power: 10140
|
Quote:
Originally Posted by TFJ4
Anybody still have one of these floating around I could borrow or purchase?
Did y'all drop the subframe? Can't get a good angle on the sawzall with where it's at to cut even all the way through although everyone else seems to have been okay.
|
When I did mine I had the car on a lift. I removed the muffler, rear sway bar, V- shaped brace, disconnected the drive shaft from the diff and then dropped the differential to pound out the two front bushings with a 21 - 24 socket and a hammer.
The the subframe bushing I used a drill and drilled around the center sleeve. Then, I took the sawzall and inserted where I had been drilling. I started from there and made a B - line to the outer ring and cut through it. Finally, I took a pry bar and a hammer and hit it twice and it came right out.
__________________
Ford Diesel and Heavy Line Technician at your service. 
|
|
|
Similar Threads
72Likes
Hybrid Mode
