Ported upper and lower

Elmo370z · 11-29-2017, 06:52 PM

Local shop ported these by hand. Doing a dyno run with my tune, dyno run with the ported parts untuned,then when my e tune is done putting it back on the dyno. Hopefully I won’t be dealing with any fuel issues like I did in the past, lost 18whp from my last dyno run

JLarson · 11-29-2017, 08:55 PM

Looking forward to seeing your numbers! Good luck!

Wonka2581 · 11-29-2017, 08:59 PM

Sub'd

Elmo370z · 11-30-2017, 05:32 PM

Don't have time to post numbers, but the results were good. We tested before anything was put on, did a run on the upper, then run on the upper and lower. Didn't change the tune and left it strapped to the dyno. Most gains were from the upper, and saw minimal gains from the upper and lower. AGAin this was all untuned. will post up number tomorrow have to sift through my viedos.

Wabbyy · 11-30-2017, 08:23 PM

Following for numbers after install.

Elmo370z · 12-01-2017, 04:36 AM

Whew its late, But the first base map has been sent out the Specialty Z

Elmo370z · 12-02-2017, 05:41 AM

Another late night. But Map 2 data logs are in. Thanks again JAYHOVAH for letting me use his cable.

Elmo370z · 12-02-2017, 02:51 PM

Bottom line is what I made before putting on anything. I believe this was with just the upper

Elmo370z · 12-02-2017, 02:53 PM

This was a 5th gear run with the upper

Elmo370z · 12-02-2017, 03:52 PM

Some parts of the powerband I picked up 14whp. Hopefully it will increase with a tune. Afr was on the lean side

Elmo370z · 12-06-2017, 09:18 PM

Come to find out my motor is knock sensitive

jrb55gh · 12-07-2017, 11:02 PM

Quote:

Originally Posted by Elmo370z

Come to find out my motor is knock sensitive

Leaning the afr and increasing the volumetric efficiency will increase combustion temperature and pressure. Both of these tend to increase the tendency to knock on a given fuel. Ignition timing must be adjusted to stay out of detonation if you want your engine to live a long fruitful life.

Elmo370z · 12-08-2017, 12:58 AM

Quote:

Originally Posted by jrb55gh

Leaning the afr and increasing the volumetric efficiency will increase combustion temperature and pressure. Both of these tend to increase the tendency to knock on a given fuel. Ignition timing must be adjusted to stay out of detonation if you want your engine to live a long fruitful life.

Seb is tuning the car. Still in the process of data logging.

ChopsZ · 08-01-2018, 07:21 PM

I'm interested to find out whatever came of this and the tuning from Seb?

Reason I'm asking is because I'm having an upper and lower ported right now and have my tuning done also by Seb.

Also wondering if I would benefit from ported throttle bodies to help out with the ported upper and lower.

And yes, I have been searching and reading, but haven't really found anything of use.

Many thanks in advance!

Elmo370z · 08-02-2018, 01:09 AM

Quote:

Originally Posted by ChopsZ

I'm interested to find out whatever came of this and the tuning from Seb?

Reason I'm asking is because I'm having an upper and lower ported right now and have my tuning done also by Seb.

Also wondering if I would benefit from ported throttle bodies to help out with the ported upper and lower.

And yes, I have been searching and reading, but haven't really found anything of use.

Many thanks in advance!

Hp gains with ported TB’s are obsolete, Throttle response will
Improve. It all depends who did your porting and how well of a job they did. Seb’s tuning is on point, but I have a knock issue. Don’t know if it’s a false knock or real knock, we did over 150 logs with race gas twice still kept knocking which I believe is false knock, but to be on the safe side we kept the timing down. But I ran with another Z making over 340 and we are neck and neck. I never went back on the dyno after the tune. Hey if you’re interested me and SS firehawk signed up for track day at Sebring October 7th through chin motorsports.

11-29-2017, 08:55 PM	#2 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684370	Looking forward to seeing your numbers! Good luck! Elmo370z likes this. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

11-29-2017, 08:59 PM	#3 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2611	Sub'd Elmo370z likes this. __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

11-30-2017, 05:32 PM	#4 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Don't have time to post numbers, but the results were good. We tested before anything was put on, did a run on the upper, then run on the upper and lower. Didn't change the tune and left it strapped to the dyno. Most gains were from the upper, and saw minimal gains from the upper and lower. AGAin this was all untuned. will post up number tomorrow have to sift through my viedos. Rusty, Hotrodz and Wonka2581 like this.

12-01-2017, 04:36 AM	#6 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Whew its late, But the first base map has been sent out the Specialty Z Hotrodz and Jayhovah like this.

12-02-2017, 03:52 PM	#10 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Some parts of the powerband I picked up 14whp. Hopefully it will increase with a tune. Afr was on the lean side Last edited by Elmo370z; 12-02-2017 at 08:48 PM.

11-30-2017, 08:23 PM	#5 (permalink)
Wabbyy Base Member Join Date: Aug 2016 Location: New Jersey Posts: 58 Drives: 2009 370z Rep Power: 9	Following for numbers after install.

12-02-2017, 05:41 AM	#7 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Another late night. But Map 2 data logs are in. Thanks again JAYHOVAH for letting me use his cable.

12-06-2017, 09:18 PM	#11 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Come to find out my motor is knock sensitive overtureZ likes this.

08-01-2018, 07:21 PM	#14 (permalink)
ChopsZ Track Member Join Date: May 2016 Location: Central Florida Age: 49 Posts: 965 Drives: 2016 370Z GM 6MT Rep Power: 2301	I'm interested to find out whatever came of this and the tuning from Seb? Reason I'm asking is because I'm having an upper and lower ported right now and have my tuning done also by Seb. Also wondering if I would benefit from ported throttle bodies to help out with the ported upper and lower. And yes, I have been searching and reading, but haven't really found anything of use. Many thanks in advance! __________________ She's For Sale! PERFORMANCE: Aero Workz \| Akebono \| BC Racing \| EcuTek \| HKS \| MaxBore \| Motordyne \| Nismo \| RJM \| SPL \| StopTech \| Z1 AUDIO: Arc Audio \| Bazooka \| Helix \| Pioneer \| Stereo Integrity

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom ported and CNC throttle bodies, upper and lower manifolds	synolimit	Exhaust/Intake	297	06-25-2021 10:13 AM
DIY Ported Lower Manifold	jrb55gh	Intake/Exhaust	5	12-06-2016 01:19 PM
[FOR SALE] Ported Lower Manifold	Riptide67	Parts for sale (Private Classifieds)	18	03-06-2016 11:59 AM
Custom ported and CNC throttle bodies, upper and lower manifolds by Synergy Composite	synolimit	Intake/Exhaust	799	03-11-2015 02:43 AM