Cooler Question

nosam1g · 11-06-2017, 03:54 PM

Yes i know there is a lot of threads out there in regards to oil coolers but some threads are a bit old. Real simple question, i like to have some spirited drives , and my z is mainly for DD use. 25 row or 34 row. I live in california and with the ac on in summer it gets up to 220-240ish.
Thanks for your input!

cowboy477989 · 11-06-2017, 04:33 PM

25 row for spirited driving and 34 row for track days.

Rusty · 11-06-2017, 09:33 PM

34 row and call it a day. No use in second guessing yourself later on.

Jhill · 11-07-2017, 04:41 AM

I’m torn on this one. SoCal stays warmer than here in nor cal and f I absolutely did not track I think I would have went 25 row. For track I need 34 but wish it would get a little warmer for DD. I do run a very high grade full synth but it’s still a bit less than ideal temp for DD, probably need to get off my lazy *** and make my block off plate.

BGTV8 · 11-07-2017, 05:08 AM

Quote:

Originally Posted by Jhill

I’m torn on this one. SoCal stays warmer than here in nor cal and f I absolutely did not track I think I would have went 25 row. For track I need 34 but wish it would get a little warmer for DD. I do run a very high grade full synth but it’s still a bit less than ideal temp for DD, probably need to get off my lazy *** and make my block off plate.

Alfoil works well as a block-off plate. Mrs JHill won't miss any out of the pantry cupboard either ........ and if it blows off, simple to get some more !!

radix023 · 11-07-2017, 09:10 AM

Quote:

Originally Posted by Rusty

34 row and call it a day. No use in second guessing yourself later on.

Concur. Be sure to get the thermostatic plate.

2011 Nismo#91 · 11-07-2017, 01:42 PM

Based on your experiences (240 max) I'd say either none (spend money elsewhere) to 25 row.

Rusty · 11-07-2017, 06:35 PM

Quote:

Originally Posted by 2011 Nismo#91

Based on your experiences (240 max) I'd say either none (spend money elsewhere) to 25 row.

The ECU is just starting to pull timing at that temp.

zdo5915 · 11-08-2017, 01:38 AM

I run a 25 row on my daily driver, on those 110+ days driving for 30 mins my temps would not pass 185F. I dont track so take that into account.

nosam1g · 11-11-2017, 10:19 PM

Quote:

Originally Posted by zdo5915

I run a 25 row on my daily driver, on those 110+ days driving for 30 mins my temps would not pass 185F. I dont track so take that into account.

thanks for everyones suggestions, i think i might go with the 25 row. My question with the 34 row is , would it still get up to a good temp just for dd use. The thermostatic plate will still allow to get up to 180ish ?

Rusty · 11-11-2017, 10:35 PM

Quote:

Originally Posted by nosam1g

thanks for everyones suggestions, i think i might go with the 25 row. My question with the 34 row is , would it still get up to a good temp just for dd use. The thermostatic plate will still allow to get up to 180ish ?

I have a 34 row cooler and live in southwest Pa. We only get about 6 to 10 days over 90F during the summer. 30 minute drive at 70 mph. It will get over 180F. Oil only needs to get over 110F. At that temp. Any moisture in the oil will start to evaporate. By the time the oil gets to 160F. All of the moisture is gone. In the winter. You can put a shield over some of the rows on the cooler until you get the temp you want. I use duct tape. You living in Cali, and seeing higher weather temps, faster speed limits, and heavier traffic. Go for the 34 row. This way, you won't be second guessing your that you should have gotten the 34 row to begin with.

nosam1g · 11-11-2017, 11:26 PM

Quote:

Originally Posted by Rusty

I have a 34 row cooler and live in southwest Pa. We only get about 6 to 10 days over 90F during the summer. 30 minute drive at 70 mph. It will get over 180F. Oil only needs to get over 110F. At that temp. Any moisture in the oil will start to evaporate. By the time the oil gets to 160F. All of the moisture is gone. In the winter. You can put a shield over some of the rows on the cooler until you get the temp you want. I use duct tape. You living in Cali, and seeing higher weather temps, faster speed limits, and heavier traffic. Go for the 34 row. This way, you won't be second guessing your that you should have gotten the 34 row to begin with.

so you literally got duct tape , and put it on ur cooler ? im leaning towards the 34 row now, but since its winter , im waiting on a good xmas sale hopefully

Rusty · 11-12-2017, 12:22 AM

Quote:

Originally Posted by nosam1g

so you literally got duct tape , and put it on ur cooler ? im leaning towards the 34 row now, but since its winter , im waiting on a good xmas sale hopefully

Yeah, I have used duct tape a time or 3 .

I used it until I found out how much of the cooler I needed to block off. Then made a block off plate out of some thin aluminum. The cooler kit to get if you have a newer Z with the poor factory cooler is the FI. It has all the parts to bypass the factory cooler. If you don't have the factory cooler. The Z1 kit is a good choice too. Which is what I have.

Jayhovah · 11-12-2017, 12:42 AM

Quote:

Originally Posted by Rusty

The cooler kit to get if you have a newer Z with the poor factory cooler is the FI. It has all the parts to bypass the factory cooler. If you don't have the factory cooler.

Not sure what the FI kit includes, but all you need on hand to remove the OEM oil cooler is two caps/clamps (I found some at the autoparts store that fit) for the coolant lines and an '09-'11 oil filter stud. All in, <$20 worth of stuff IIRC.

Tractionless · 11-16-2017, 10:46 AM

I was under the impression the factory cooler stays in place and the new color is plumbed directly through the thermostatic adaptor plate that affixes to the OE oil filter housing.

11-06-2017, 03:54 PM	#1 (permalink)
nosam1g Base Member Join Date: May 2017 Location: Socal Posts: 74 Drives: 2015 370z Sport Tech Rep Power: 8	Cooler Question Yes i know there is a lot of threads out there in regards to oil coolers but some threads are a bit old. Real simple question, i like to have some spirited drives , and my z is mainly for DD use. 25 row or 34 row. I live in california and with the ac on in summer it gets up to 220-240ish. Thanks for your input!

11-06-2017, 09:33 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,220 Drives: 2011 Nismo GM 6M Rep Power: 2684438	34 row and call it a day. No use in second guessing yourself later on. BeemaaZ, Chuck33079, axmea? and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-07-2017, 01:42 PM	#7 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,402 Drives: slowly Rep Power: 40569	Based on your experiences (240 max) I'd say either none (spend money elsewhere) to 25 row. __________________ GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

11-16-2017, 10:46 AM	#15 (permalink)
Tractionless A True Z Fanatic Join Date: Jan 2016 Location: Atlantic SE Posts: 1,326 Drives: '10 K23 ST 7AT Rep Power: 30525	I was under the impression the factory cooler stays in place and the new color is plumbed directly through the thermostatic adaptor plate that affixes to the OE oil filter housing. __________________ Toys Not Tots

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7AT Cooler Question/?????	flyguy0812	Engine & Drivetrain	4	05-05-2017 11:08 AM
z1 25 row oil cooler question	evil370z	Engine & Drivetrain	6	05-03-2015 08:20 AM
25 row oil cooler question	mr gushe	Engine & Drivetrain	32	08-14-2013 12:09 PM
Used Oil Cooler Question.	lhinojos	Engine & Drivetrain	5	06-04-2012 07:20 AM
Oil Cooler Question?	EVL370	Engine & Drivetrain	3	04-13-2010 01:54 AM

11-06-2017, 04:33 PM	#2 (permalink)
cowboy477989 Base Member Join Date: Jun 2015 Location: Greensboro, NC Posts: 31 Drives: 17 BLK 6M Nismo Tech Rep Power: 11	25 row for spirited driving and 34 row for track days.

11-07-2017, 04:41 AM	#4 (permalink)
Jhill Track Member Join Date: Mar 2016 Location: San jose Posts: 854 Drives: 2013 370z sport Rep Power: 3384	I’m torn on this one. SoCal stays warmer than here in nor cal and f I absolutely did not track I think I would have went 25 row. For track I need 34 but wish it would get a little warmer for DD. I do run a very high grade full synth but it’s still a bit less than ideal temp for DD, probably need to get off my lazy *** and make my block off plate.

11-08-2017, 01:38 AM	#9 (permalink)
zdo5915 Base Member Join Date: May 2014 Location: California Posts: 40 Drives: 2010 370z base/sprt Rep Power: 11	I run a 25 row on my daily driver, on those 110+ days driving for 30 mins my temps would not pass 185F. I dont track so take that into account.