Assistance needed in Manchester in a 370z

chloeaddict · 09-16-2017, 07:05 AM

Hey guys,

This is a bit of a plea for help! 6 years ago I bought my dream car a Nissan 370z GT. Within 6 months my ex boyfriend has crashed it in to wall and regrettably the insurance didn't pay out on it.

For 4.5 year it stood on the front of my house under a tarpaulin

In the past year i've been in the position to start buying parts with the hope to getting it back on the road. One of my mates who is pretty handy with cars has been helping me but we have pretty much done as much as we can.

The engine is fine and it has been on a jig and is straight. We have fitted the fan and fan house and it is holding water.

What I need help with;
We have fitted the radiator off a manual car (mines an auto) so we need to fit a transcooler which I have.
I have the bumper and I think most of the parts for it....we need help fitting that.

I really need someone to come and have a look at the car at my house and tell me what bits I still need to get and help me fit the transcooler and fill it.

I have no way of getting the car to a garage and don't really have the money to take it to a Nissan specialist.

I wonder if there was anyone in the North West (I live in Manchester) that would be happy to come and help me out. I am more than happy to pay you for your time and my friend will be here to assist with anything. I also make a decent brew!

I am getting to the point where I will have no other option than to sell the car as it is and I really don't want to have to do that.

Any assistance would be greatly appreciated!

I do have some pics I can send but I cant upload them as they are too large!

Thanks!

Spooler · 09-16-2017, 12:56 PM

So basically you need someone with an automatic to post pictures of how the transmission cooler is mounted. You will also need some instructions on how to refill the auto tranny to the proper level once you get the cooler installed. I don't have an auto so maybe someone can post picks.

Rusty · 09-16-2017, 07:54 PM

Are you in the UK?

jchammond · 09-16-2017, 10:46 PM

Mounted like an engine oil cooler (with inlet/outlet) on top of cooler-ensures it stay's full,along w/lines....unsure if trans has been drained or pumped out from crash.
On level elevated surface,drain at 19mm hex plug on rear & then fill from bottom-through 5mm allen plug towards L/F of pan.
It's designed to be overfilled & cycled through the gears...then remove overfill plug & let excess drain out till it begin's to drip (Nissan says 105-110*F) other's have said up to 170*F...& then cap off.
Mine is capped off at a 110*F drip & no problem's@85,000mi. +

chloeaddict · 09-18-2017, 10:00 AM

Quote:

Originally Posted by Spooler

So basically you need someone with an automatic to post pictures of how the transmission cooler is mounted. You will also need some instructions on how to refill the auto tranny to the proper level once you get the cooler installed. I don't have an auto so maybe someone can post picks.

No because on an auto its built in to the radiator.....so need someone who has fitted a separate one.....

chloeaddict · 09-18-2017, 10:01 AM

Quote:

Originally Posted by Rusty

Are you in the UK?

Yes I'm in the UK.

jchammond · 09-18-2017, 11:50 AM

Quote:

Originally Posted by chloeaddict

Hey guys,

This is a bit of a plea for help! 6 years ago I bought my dream car a Nissan 370z GT. Within 6 months my ex boyfriend has crashed it in to wall and regrettably the insurance didn't pay out on it.

For 4.5 year it stood on the front of my house under a tarpaulin

In the past year i've been in the position to start buying parts with the hope to getting it back on the road. One of my mates who is pretty handy with cars has been helping me but we have pretty much done as much as we can.

The engine is fine and it has been on a jig and is straight. We have fitted the fan and fan house and it is holding water.

What I need help with;

We have fitted the radiator off a manual car (mines an auto) so we need to fit a transcooler which I have.

I have the bumper and I think most of the parts for it....we need help fitting that.

I really need someone to come and have a look at the car at my house and tell me what bits I still need to get and help me fit the transcooler and fill it.

I have no way of getting the car to a garage and don't really have the money to take it to a Nissan specialist.

I wonder if there was anyone in the North West (I live in Manchester) that would be happy to come and help me out. I am more than happy to pay you for your time and my friend will be here to assist with anything. I also make a decent brew!

I am getting to the point where I will have no other option than to sell the car as it is and I really don't want to have to do that.

Any assistance would be greatly appreciated!

I do have some pics I can send but I cant upload them as they are too large!

Thanks!

Pie job,
Mount it just like an auxiliary engine oil cooler & tie the 2 existing hoses from A/T or install new ones.
Doesn't matter the direction of flow/ as plumbing is on top of cooler.

Sent from my iPhone using Tapatalk

09-16-2017, 07:05 AM	#1 (permalink)
chloeaddict Base Member Join Date: Aug 2013 Location: Manchester Posts: 9 Drives: 10 Nissan 370z GT Rep Power: 12	Assistance needed in Manchester in a 370z Hey guys, This is a bit of a plea for help! 6 years ago I bought my dream car a Nissan 370z GT. Within 6 months my ex boyfriend has crashed it in to wall and regrettably the insurance didn't pay out on it. For 4.5 year it stood on the front of my house under a tarpaulin In the past year i've been in the position to start buying parts with the hope to getting it back on the road. One of my mates who is pretty handy with cars has been helping me but we have pretty much done as much as we can. The engine is fine and it has been on a jig and is straight. We have fitted the fan and fan house and it is holding water. What I need help with; We have fitted the radiator off a manual car (mines an auto) so we need to fit a transcooler which I have. I have the bumper and I think most of the parts for it....we need help fitting that. I really need someone to come and have a look at the car at my house and tell me what bits I still need to get and help me fit the transcooler and fill it. I have no way of getting the car to a garage and don't really have the money to take it to a Nissan specialist. I wonder if there was anyone in the North West (I live in Manchester) that would be happy to come and help me out. I am more than happy to pay you for your time and my friend will be here to assist with anything. I also make a decent brew! I am getting to the point where I will have no other option than to sell the car as it is and I really don't want to have to do that. Any assistance would be greatly appreciated! I do have some pics I can send but I cant upload them as they are too large! Thanks!

09-16-2017, 07:54 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,171 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Are you in the UK? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

09-16-2017, 10:46 PM	#4 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Mounted like an engine oil cooler (with inlet/outlet) on top of cooler-ensures it stay's full,along w/lines....unsure if trans has been drained or pumped out from crash. On level elevated surface,drain at 19mm hex plug on rear & then fill from bottom-through 5mm allen plug towards L/F of pan. It's designed to be overfilled & cycled through the gears...then remove overfill plug & let excess drain out till it begin's to drip (Nissan says 105-110F) other's have said up to 170F...& then cap off. Mine is capped off at a 110*F drip & no problem's@85,000mi. + __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Member from Manchester UK	Sharpen	New Forum Member	5	12-11-2011 10:27 PM
My Z in Manchester, NH recently	longfinger	Member's 370Z Gallery	0	09-09-2011 07:45 PM
Oil Assistance Needed - Couldn't Find In Search Bar - Sorry!	Husky Downs	Nissan 370Z General Discussions	25	04-07-2011 04:52 PM
Exhaust decision to be made....>>>>>assistance needed	g35300mm	Intake/Exhaust	22	01-26-2011 08:05 AM
Help with color for my wheels, photoshop assistance needed	chuckd05	Nissan 370Z Photos / Spyshots / Video / Media Gallery	10	01-12-2011 07:37 PM

09-16-2017, 12:56 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,791 Drives: 2013 Nismo 370z Rep Power: 2684392	So basically you need someone with an automatic to post pictures of how the transmission cooler is mounted. You will also need some instructions on how to refill the auto tranny to the proper level once you get the cooler installed. I don't have an auto so maybe someone can post picks.