'17 & csc

HIZZY · 08-30-2017, 10:32 AM

Should i be concerned with future CSC issues?

not sure if Nissan fixed the issue in recent years.

tried searching on here for relative posts but no avail.

Thanks

Joe@ZSpeed · 08-30-2017, 10:35 AM

Slave is the same in all years, We have had a few people already in 16 models with failed slaves, In fact have one sitting out front right now getting out CMAK today. Assuming 17 is no different, Part# is the same.

HIZZY · 08-30-2017, 10:41 AM

yikes

HIZZY · 08-30-2017, 11:27 AM

probably should order a Zspeed or Z1 kit just to have on hand "just in case"

however... if this gets replaced,,,, what else should i get to partner with this upgrade? flywheel too? & what else??? might as well do it all in one shot....

radix023 · 08-30-2017, 11:54 AM

Quote:

Originally Posted by HIZZY

probably should order a Zspeed or Z1 kit just to have on hand "just in case"

however... if this gets replaced,,,, what else should i get to partner with this upgrade? flywheel too? & what else??? might as well do it all in one shot....

I wouldn't order the kit while you still have warranty coverage and your CSC hasn't had any issues. However, once that coverage is gone, yeah, being ready to put in a permanent fix is not a bad idea.

Jayhovah · 08-30-2017, 01:54 PM

Quote:

Originally Posted by radix023

I wouldn't order the kit while you still have warranty coverage and your CSC hasn't had any issues. However, once that coverage is gone, yeah, being ready to put in a permanent fix is not a bad idea.

since you are under warranty... if it did go out on you, I would provide them an Z1 HD-CSC and ask them to install that instead.

I personally wouldn't bother upgrading the clutch/flywheel unless you are planning to go to the track or planning to go turbo/super.

HIZZY · 08-30-2017, 02:12 PM

thank you for feedback.... i'm just hoping not ALL of the CSC's are bad and there are some out there that haven't had issues

would like to see an actual percentage out there of those who have been affected vs the non-affected

you guys on this forum got me stressing this CSC thing

discusfan · 08-30-2017, 04:29 PM

TSB suggests replacing the clutch/brake fluid with the GTR brake fluid. Cost me 35 bucks for the fluid alone. But the clutch does feel a little tighter now.

Chuck33079 · 08-30-2017, 05:46 PM

Gtr fluid is just dot 4 fluid. It's not a magic bullet, it'll just kick the can down the road. Fluid can't fix the plastic seals inside the csc from coming apart.

TreeSemdyZee · 08-30-2017, 06:08 PM

Quote:

Originally Posted by Chuck33079

Gtr fluid is just dot 4 fluid. It's not a magic bullet, it'll just kick the can down the road. Fluid can't fix the plastic seals inside the csc from coming apart.

This.

OhioYJ · 08-30-2017, 06:24 PM

Quote:

Originally Posted by HIZZY

probably should order a Zspeed or Z1 kit just to have on hand "just in case"

I originally was thinking I might order it ahead of time, but then some go 50-80k before needing one. Some need one at 20k.. I decided to just wait it out and see what happens, I'll order parts when I actually need them. No sense in something sitting on the shelf for 3-4 years just in case, especially since its not dirt cheap. Also I know typically these are parts that are in stock and I can get quickly.

Just FYI, do some reading. The Z1 kit requires adjustments. Several people were claiming they needed adjuatments every 1k-3k miles. The ZSpeed CMAK is supposed to be self adjusting.

Kzonts · 08-30-2017, 07:09 PM

In my case I decided to be proactive. I had mine replaced @28k miles with a ZSpeed CMAK and ZSpeed stock replacement clutch/flywheel. The "Z" is our daily driver for my wife since I travel frequently and park the SUV at the airport. I didn't want the CSC failing while she's driving to work and I'm away from home.

The CMAK has been flawless...

jaedub · 08-30-2017, 10:34 PM

If it makes you feel better, I have a 2010 with stock CSC and it's running just fine. If you truly know how to properly drive a stick shift, I doubt you'll need a replacement.

Chuck33079 · 08-30-2017, 10:54 PM

So the people who have had them fail on test drives just don't know how to drive a stick?

Jayhovah · 08-30-2017, 10:54 PM

Quote:

Originally Posted by jaedub

If it makes you feel better, I have a 2010 with stock CSC and it's running just fine. If you truly know how to properly drive a stick shift, I doubt you'll need a replacement.

I don't think it has anything to do with driver skill.

08-30-2017, 10:32 AM	#1 (permalink)
HIZZY Base Member Join Date: Jan 2017 Location: Boston Posts: 151 Drives: 2017 NISMO 370 Rep Power: 3363	'17 & csc Should i be concerned with future CSC issues? not sure if Nissan fixed the issue in recent years. tried searching on here for relative posts but no avail. Thanks

08-30-2017, 10:35 AM	#2 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 342999	Slave is the same in all years, We have had a few people already in 16 models with failed slaves, In fact have one sitting out front right now getting out CMAK today. Assuming 17 is no different, Part# is the same. __________________ http://photos.zspeedperformance.com/...ardsize=468x60 Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

08-30-2017, 05:46 PM	#9 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Gtr fluid is just dot 4 fluid. It's not a magic bullet, it'll just kick the can down the road. Fluid can't fix the plastic seals inside the csc from coming apart. TreeSemdyZee likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

08-30-2017, 07:09 PM	#12 (permalink)
Kzonts Track Member Join Date: Mar 2015 Location: Greenville, SC Age: 61 Posts: 865 Drives: 2019 Roadster Rep Power: 200741	In my case I decided to be proactive. I had mine replaced @28k miles with a ZSpeed CMAK and ZSpeed stock replacement clutch/flywheel. The "Z" is our daily driver for my wife since I travel frequently and park the SUV at the airport. I didn't want the CSC failing while she's driving to work and I'm away from home. The CMAK has been flawless... TreeSemdyZee likes this. __________________ 2019 Magnetic Black Roadster FI Exhaust \| EVO-R Rear Diffuser \| Artwork Bodyshop Front Splitter \| Tuned By Specialty Z

08-30-2017, 10:54 PM	#14 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	So the people who have had them fail on test drives just don't know how to drive a stick? Jayhovah and Zthirty4NISMO like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

08-30-2017, 10:41 AM	#3 (permalink)
HIZZY Base Member Join Date: Jan 2017 Location: Boston Posts: 151 Drives: 2017 NISMO 370 Rep Power: 3363	yikes

08-30-2017, 11:27 AM	#4 (permalink)
HIZZY Base Member Join Date: Jan 2017 Location: Boston Posts: 151 Drives: 2017 NISMO 370 Rep Power: 3363	probably should order a Zspeed or Z1 kit just to have on hand "just in case" however... if this gets replaced,,,, what else should i get to partner with this upgrade? flywheel too? & what else??? might as well do it all in one shot....

08-30-2017, 02:12 PM	#7 (permalink)
HIZZY Base Member Join Date: Jan 2017 Location: Boston Posts: 151 Drives: 2017 NISMO 370 Rep Power: 3363	thank you for feedback.... i'm just hoping not ALL of the CSC's are bad and there are some out there that haven't had issues would like to see an actual percentage out there of those who have been affected vs the non-affected you guys on this forum got me stressing this CSC thing

08-30-2017, 04:29 PM	#8 (permalink)
discusfan Base Member Join Date: Oct 2016 Location: Austin, Texas Posts: 31 Drives: 09 370Z RD M6 Rep Power: 9	TSB suggests replacing the clutch/brake fluid with the GTR brake fluid. Cost me 35 bucks for the fluid alone. But the clutch does feel a little tighter now.

08-30-2017, 10:34 PM	#13 (permalink)
jaedub Track Member Join Date: Aug 2010 Location: Los Angeles Posts: 906 Drives: 2010 Black 370Z MT Rep Power: 305	If it makes you feel better, I have a 2010 with stock CSC and it's running just fine. If you truly know how to properly drive a stick shift, I doubt you'll need a replacement.