Nissan 370Z Forum - How much to install...

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - How much to install... (http://www.the370z.com/engine-drivetrain/123419-how-much-install.html)

osbornsm

08-27-2017 07:34 AM

How much to install...

Zspeed CMAK, flywheel, clutch... On a mostly stock 370z.

Ghost116

08-27-2017 08:24 AM

I'll be he first to lol. And keep my flame suit off it's to early. Check diy section, not sure if there's that exact part but I'm sure there's a drop the tranny, open it diy. Get a fsm will help if u get lost. And I thought the cmak came with some instructions?

Sent from my iPhone using Tapatalk

Chuck33079

08-27-2017 08:34 AM

Figure 6-8 hours of labor at a decent shop.

osbornsm

08-27-2017 01:01 PM

Quote:

Originally Posted by Chuck33079 (Post 3688526)

Figure 6-8 hours of labor at a decent shop.

Thanks Chuck, I just want to be sure in not getting screwed at a shop.

:tiphat:

lj909

08-27-2017 02:15 PM

The standard clutch fee plus 2-4 hours for the CMAK since the trans is already out. Should not be more then that. I installed my CMAK and it was very straight forward with instructions.

2011 Nismo#91

08-27-2017 02:30 PM

Quote:

Originally Posted by Chuck33079 (Post 3688526)

Figure 6-8 hours of labor at a decent shop.

Yep it's takes about that long.

Joe@ZSpeed

08-29-2017 08:40 AM

Quote:

Originally Posted by lj909 (Post 3688565)

The standard clutch fee plus 2-4 hours for the CMAK since the trans is already out. Should not be more then that. I installed my CMAK and it was very straight forward with instructions.

Once the trans is dropped the CMAK should take no more than 30 minutes to install. It is 7 bolts inside and 2 bolts outside.

lj909

08-29-2017 09:23 AM

Quote:

Originally Posted by Joe@ZSpeed (Post 3688989)

Once the trans is dropped the CMAK should take no more than 30 minutes to install. It is 7 bolts inside and 2 bolts outside.

I agree now that i have done it. But for a first timer, it takes a little longer. ;)

Quicksilvers

08-31-2017 05:36 AM

I was quoted 7-8 hours labor on this job and was told it is harder than it looks and is quite detailed.

lj909

08-31-2017 01:17 PM

Quote:

Originally Posted by Quicksilvers (Post 3689610)

I was quoted 7-8 hours labor on this job and was told it is harder than it looks and is quite detailed.

Well they're trying to get money out of you cuz it's not. I'm just a driveway hobby mechanic and it was very straight forward with good instructions. For the CMAK anyways. Doing the whole clutch as well will take time

Jayhovah

08-31-2017 01:22 PM

Quote:

Originally Posted by lj909 (Post 3689723)

I'm assuming he meant for the whole job, not just CMAK assuming the trans is already out.

Chucks estimate of 6-8 is accurate by my experience.

All times are GMT -5. The time now is 03:40 AM.