370z ARC Coolant & Oil Catch can installation

jchammond · 08-05-2017, 12:21 PM

2 separate cans routed.

Sent from my iPhone using Tapatalk

octet · 08-05-2017, 12:49 PM

I think I’ve done it, is this OK, doesn’t quite make sense to me? :-/

jchammond · 08-05-2017, 01:02 PM

Nope; you "T" into the pcv line to front of intake (plenum) , not cai

jchammond · 08-05-2017, 01:08 PM

One hose goes to that valve (pcv) that red silicone hose is hooked to & other hose from tank to where red hose hooks (plenum) ...do that on both sides.

Sent from my iPhone using Tapatalk

octet · 08-05-2017, 01:19 PM

Hoses seem too long for the setup you're saying, I'd need to cut the off, are you sure?

jchammond · 08-05-2017, 01:23 PM

Couple simple pics.

I may have confused you by originally saying from PCV to tank & tank to intake (instead of saying upper plenum)...it's where the vacuum comes from to suck oil vapors out from pcv valves & tank catches residual (eng. oil) in tank.

Sent from my iPhone using Tapatalk

jchammond · 08-05-2017, 01:30 PM

Quote:

Originally Posted by octet

Hoses seem too long for the setup you're saying, I'd need to cut the off, are you sure?

Yep; as he was Twin-Turbo'd & they route a bit differently & use a check valve...
as the plenum would be filled with boost pressure under acceleration & could cause crankcase to pressurize & blow out a few seals.

jchammond · 08-05-2017, 01:32 PM

I'm surprised that the ARC container doesn't have any arrows of flow direction.

jchammond · 08-05-2017, 01:46 PM

Quote:

Originally Posted by octet

Hoses seem too long for the setup you're saying, I'd need to cut the off, are you sure?

You can wait & see if any more peep's comment...but this way will work for you [or] i'll pay you for the cut hoses if it doesn't.

octet · 08-05-2017, 01:55 PM

Quote:

Originally Posted by jchammond

You can wait & see if any more peep's comment...but this way will work for you [or] i'll pay you for the cut hoses if it doesn't.

Like this, right?

jchammond · 08-05-2017, 01:57 PM

yep, the 2 red ends....look's like the arrow could be pointing at the high pressure fuel line.

octet · 08-05-2017, 02:01 PM

Come on, I'm not that stupid! LOL

OK, will do this now and update the thread with pics, thanks a lot.

jchammond · 08-05-2017, 02:07 PM

Very nice tank,,, Those aren't cheap!

octet · 08-05-2017, 02:09 PM

Hmm, hoses are larger than the intake ports

jchammond · 08-05-2017, 02:21 PM

could be what those 2 - 90* nipples were for...it needs to be snug; so you're gonna have to bushing it up some.

08-05-2017, 12:21 PM	#16 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	2 separate cans routed. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-05-2017, 12:49 PM	#17 (permalink)
octet Enthusiast Member Join Date: Jul 2013 Location: London, UK Posts: 305 Drives: 2017 Nismo 370z 6MT Rep Power: 3367	370z ARC Coolant & Oil Catch can installation I think I’ve done it, is this OK, doesn’t quite make sense to me? :-/

08-05-2017, 01:02 PM	#18 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Nope; you "T" into the pcv line to front of intake (plenum) , not cai __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-05-2017, 01:08 PM	#19 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	One hose goes to that valve (pcv) that red silicone hose is hooked to & other hose from tank to where red hose hooks (plenum) ...do that on both sides. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-05-2017, 01:23 PM	#21 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Couple simple pics. I may have confused you by originally saying from PCV to tank & tank to intake (instead of saying upper plenum)...it's where the vacuum comes from to suck oil vapors out from pcv valves & tank catches residual (eng. oil) in tank. Sent from my iPhone using Tapatalk octet likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-05-2017, 01:19 PM	#20 (permalink)
octet Enthusiast Member Join Date: Jul 2013 Location: London, UK Posts: 305 Drives: 2017 Nismo 370z 6MT Rep Power: 3367	Hoses seem too long for the setup you're saying, I'd need to cut the off, are you sure?

08-05-2017, 01:32 PM	#23 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	I'm surprised that the ARC container doesn't have any arrows of flow direction. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-05-2017, 01:57 PM	#26 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	yep, the 2 red ends....look's like the arrow could be pointing at the high pressure fuel line. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-05-2017, 02:01 PM	#27 (permalink)
octet Enthusiast Member Join Date: Jul 2013 Location: London, UK Posts: 305 Drives: 2017 Nismo 370z 6MT Rep Power: 3367	Come on, I'm not that stupid! LOL OK, will do this now and update the thread with pics, thanks a lot. jchammond likes this.

08-05-2017, 02:07 PM	#28 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Very nice tank,,, Those aren't cheap! __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-05-2017, 02:09 PM	#29 (permalink)
octet Enthusiast Member Join Date: Jul 2013 Location: London, UK Posts: 305 Drives: 2017 Nismo 370z 6MT Rep Power: 3367	Hmm, hoses are larger than the intake ports

08-05-2017, 02:21 PM	#30 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	could be what those 2 - 90* nipples were for...it needs to be snug; so you're gonna have to bushing it up some. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] ARC Coolant/Catch Can Combo	Riptide67	Parts for sale (Private Classifieds)	2	04-25-2016 01:57 PM
[FOR SALE] ARC Coolant/Catch Can Combo	Riptide67	Parts for sale (Private Classifieds)	0	04-22-2016 09:39 PM
[FOR SALE] Oil catch can/coolant reservoir	03specvvictor	Parts for sale (Private Classifieds)	1	04-17-2016 08:44 AM
ARC Coolant Catch Can Combo	Riptide67	DIY Section (Do-It-Yourself)	9	12-18-2015 02:50 AM
[FOR SALE] Authentic ARC oil/coolant catch can	Navyboy916	Parts for sale (Private Classifieds)	13	12-07-2013 12:07 AM