Clutch install gone Bad

Zthirty4NISMO · 06-21-2017, 09:32 AM

I knew something was fishy here. As Joe said their CSC has same travel as stock and RJM pedal set to 0 is same as stock so either the clutch kit was bad/setup wrong or the pedal really wasn't set to 0.

Sent from my HTC6500LVW using Tapatalk

pokeyl · 06-24-2017, 06:37 PM

Last update, I talked to Joe at Speed, and I have the old CSC with the .5 inch adapter plate. The new ones have .25".

The extra .25 inch caused all the problems.

Joe@ZSpeed · 06-26-2017, 10:01 AM

Quote:

Originally Posted by pokeyl

Last update, I talked to Joe at Speed, and I have the old CSC with the .5 inch adapter plate. The new ones have .25".

The extra .25 inch caused all the problems.

If that was the case it was a Early HD slave for the OS Giken twin/triple disk.
That would cause issues for sure if used with a single disk clutch kit!

06-21-2017, 09:32 AM	#1 (permalink)
Zthirty4NISMO Base Member Join Date: Oct 2014 Location: South Dakota Posts: 221 Drives: DRKNITE Rep Power: 11	I knew something was fishy here. As Joe said their CSC has same travel as stock and RJM pedal set to 0 is same as stock so either the clutch kit was bad/setup wrong or the pedal really wasn't set to 0. Sent from my HTC6500LVW using Tapatalk __________________ 2014 370Z NISMO #0543 - Magnetic Black on Black on Black Always Dry \|\| AROSPEED \|\| Covercraft \|\| CoverKing \|\| EVO-R \|\| Fast Intentions \|\| FilterMag \|\| NISMO \|\| ONEighty \|\| Prismatic Powders \|\| RJM Performance \|\| The370Z.com \|\| Trackspec \|\| ZSPEC Design \|\| ZSPEED Performance \|\| Z1 Motorsports \|\| Panaflex Carbon Ceramic Tint

06-24-2017, 06:37 PM	#2 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 900 Drives: ??? Rep Power: 55	Last update, I talked to Joe at Speed, and I have the old CSC with the .5 inch adapter plate. The new ones have .25". The extra .25 inch caused all the problems. __________________ It's not my fault I'm old, I was born a very long time ago!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stage 3 clutch install	kentmo280z	Engine & Drivetrain	5	05-15-2015 08:39 AM
Trans clutch/fly install	YzGyz	Engine & Drivetrain	11	01-14-2015 11:04 AM
Help with RJM Clutch Pedal Install	NoHyperbole	Southern California Region	3	01-13-2015 09:50 AM
Clutch Install Advice	40 to 332	DIY Section (Do-It-Yourself)	6	07-25-2014 11:26 PM
Clutch install	GaleForce	Canada	8	10-27-2012 02:01 PM