Deck and compression height

zer099 · 05-08-2017, 10:53 AM

I might have failed at searching but I couldn't find the answer:

Does anyone know the deck height and compression height on the VQ37VHR engine? Thanks!

SouthArk370Z · 05-08-2017, 12:07 PM

If nobody comes up with an answer, that info may be in the FSM (link in my sig).

zer099 · 05-08-2017, 12:17 PM

I looked in the FSM and didn't find it in the section I presumed it would be in: Engine Mechanical. Thank you though.

Orionx1 · 05-09-2017, 03:47 PM

Quote:

Originally Posted by zer099

I might have failed at searching but I couldn't find the answer:

Does anyone know the deck height and compression height on the VQ37VHR engine? Thanks!

for what its worth-
Brian Crower web site states the following for block height, which i believe is the same thing as deck height-

Stock Specification
VQ37HR 95.5mm bore x 86.0mm stroke - 8.795" Block Height

i did not see any specs on compression height.

zer099 · 05-09-2017, 04:01 PM

Thank you. 8.795 inches is about 223.393mm which is close to my guess of 225mm.

I reached out to a few piston companies to see if they had the information. If someone happened to have a piston laying around that could measure it that would rock.

BGTV8 · 05-09-2017, 04:18 PM

Give Ben Pila or Clark Steppler a call at Jim Wolf Technology - (619) 442-0680 Mon-Fri 8am-5pm Pacific Time Zone

They will have the info you need.

Orionx1 · 05-09-2017, 04:27 PM

Quote:

Originally Posted by zer099

Thank you. 8.795 inches is about 223.393mm which is close to my guess of 225mm.

I reached out to a few piston companies to see if they had the information. If someone happened to have a piston laying around that could measure it that would rock.

Again- FTW more after market specs, these are from Wiseco-

zer099 · 05-09-2017, 04:40 PM

30.43mm CH is what I found randomly on an other forum as well. Though the Comp ratio is 9.0:1 on those pistons so I wonder if they moved the height any to achieve that or just dished the piston more. Thank you again.

Rusty · 05-09-2017, 09:50 PM

Believe those might be induction pistons at 9 CR. Should be 11 CR for stock N/A.

05-08-2017, 10:53 AM	#1 (permalink)
zer099 Base Member Join Date: Oct 2015 Location: Dawsonville, GA Posts: 88 Drives: '98 200sx; '09 G37x Rep Power: 10	Deck and compression height I might have failed at searching but I couldn't find the answer: Does anyone know the deck height and compression height on the VQ37VHR engine? Thanks! __________________ 2009 G37X \| 326 AWHP \| 264 AWTQ

05-08-2017, 12:07 PM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	If nobody comes up with an answer, that info may be in the FSM (link in my sig). __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

05-08-2017, 12:17 PM	#3 (permalink)
zer099 Base Member Join Date: Oct 2015 Location: Dawsonville, GA Posts: 88 Drives: '98 200sx; '09 G37x Rep Power: 10	I looked in the FSM and didn't find it in the section I presumed it would be in: Engine Mechanical. Thank you though. __________________ 2009 G37X \| 326 AWHP \| 264 AWTQ

05-09-2017, 04:01 PM	#5 (permalink)
zer099 Base Member Join Date: Oct 2015 Location: Dawsonville, GA Posts: 88 Drives: '98 200sx; '09 G37x Rep Power: 10	Thank you. 8.795 inches is about 223.393mm which is close to my guess of 225mm. I reached out to a few piston companies to see if they had the information. If someone happened to have a piston laying around that could measure it that would rock. __________________ 2009 G37X \| 326 AWHP \| 264 AWTQ

05-09-2017, 04:40 PM	#8 (permalink)
zer099 Base Member Join Date: Oct 2015 Location: Dawsonville, GA Posts: 88 Drives: '98 200sx; '09 G37x Rep Power: 10	30.43mm CH is what I found randomly on an other forum as well. Though the Comp ratio is 9.0:1 on those pistons so I wonder if they moved the height any to achieve that or just dished the piston more. Thank you again. __________________ 2009 G37X \| 326 AWHP \| 264 AWTQ

05-09-2017, 04:18 PM	#6 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,514 Drives: 09 Nissan 370Z M6 Rep Power: 39973	Give Ben Pila or Clark Steppler a call at Jim Wolf Technology - (619) 442-0680 Mon-Fri 8am-5pm Pacific Time Zone They will have the info you need.

05-09-2017, 09:50 PM	#9 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,219 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Believe those might be induction pistons at 9 CR. Should be 11 CR for stock N/A. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Reducing compression	willyr33	Forced Induction	1	03-10-2016 07:25 AM
compression decision	Rid3_FaM0uS	Forced Induction	52	04-18-2014 11:44 AM
KW V3 Compression Adjustment	vqloven	Brakes & Suspension	5	11-16-2012 05:30 PM
Tire question about sidewall height in relation to ride height...	chuckd05	Wheels & Tires	2	05-07-2011 05:03 AM
DIY Low Compression Pistons	MightyBobo	The Lounge (Off Topic)	15	09-04-2009 03:00 AM