oil cooler

flyguy0812 · 04-28-2017, 10:23 PM

Still trying to get my oil temps in line. I have a 25 row dual oil cooler that the lines attach to the sides not on top. While doing an oil change I removed the bottom hose off the cooler and very little oil came out. I now think/know the oil is draining back into the engine. This means when I check the oil cold the cooler is empty.
Any ideas or am I wrong?

Brian S · 04-29-2017, 12:35 PM

I mounted a top fitting 19 row Setrab cooler on my 2010 370Z about a month ago, and I have it taped up around town, because the oil temps are too low. Is your oil feed line to the cooler, the top fitting or the bottom? It should be the bottom fitting, on a side plumbed cooler. If it's the top, most of the oil bypass's the cooler fins.
A few oil temp norm's:
oil should run between 190 & 230 F
Max oil temp should be 250 / 260 F
If oil is not hot enough, water & gas in the oil, do not get boiled off
Synthetic oil can run hotter, but there is no real gain
Hope this helps
Brian

04-28-2017, 10:23 PM	#1 (permalink)
flyguy0812 Base Member Join Date: Aug 2015 Location: Texas Posts: 30 Drives: 2015 370z white auto Rep Power: 10	oil cooler Still trying to get my oil temps in line. I have a 25 row dual oil cooler that the lines attach to the sides not on top. While doing an oil change I removed the bottom hose off the cooler and very little oil came out. I now think/know the oil is draining back into the engine. This means when I check the oil cold the cooler is empty. Any ideas or am I wrong?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Install location of Stillen SC cooler AND Stillen Oil cooler AND ps cooler	imazman	Forced Induction	7	12-18-2016 04:15 PM
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 06:47 AM
DIY: Oil cooler and radiator spray cooler with video	AnthonyD1978	Track / Autocross / Drifting / Dragstrip	24	08-14-2015 10:55 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 03:27 PM
7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler	matcop	Engine & Drivetrain	17	09-07-2013 11:09 AM

04-29-2017, 12:35 PM	#2 (permalink)
Brian S Base Member Join Date: Aug 2016 Location: West Bend, WI Posts: 29 Drives: Nissan 370Z, 40th Rep Power: 9	I mounted a top fitting 19 row Setrab cooler on my 2010 370Z about a month ago, and I have it taped up around town, because the oil temps are too low. Is your oil feed line to the cooler, the top fitting or the bottom? It should be the bottom fitting, on a side plumbed cooler. If it's the top, most of the oil bypass's the cooler fins. A few oil temp norm's: oil should run between 190 & 230 F Max oil temp should be 250 / 260 F If oil is not hot enough, water & gas in the oil, do not get boiled off Synthetic oil can run hotter, but there is no real gain Hope this helps Brian