GT-R turbos on the VQ37

husam2012 · 01-14-2018, 07:09 PM

I decided to not use the GTR intercoolers this time as I found a good deal on the CJM intercooler with 3” piping.

Thanks Justin!
Wish me luck that it can be finished before April this time around

Sent from my iPhone using Tapatalk

sirnixalot · 01-15-2018, 11:17 AM

so just thinking on paper here

If you were to remake both engine mount brackets to extend lower and then have a physically thinner engine mount. Is there enough room everywhere else that would allow a 3" intake off the turbo?

I know that's getting off the budget build theme but maybe for a V3 kit if there is such a demand?

Hell the z1 mounts are adjustable....hmmmmm

husam2012 · 01-15-2018, 11:22 AM

Quote:

Originally Posted by sirnixalot

so just thinking on paper here

If you were to remake both engine mount brackets to extend lower and then have a physically thinner engine mount. Is there enough room everywhere else that would allow a 3" intake off the turbo?

I know that's getting off the budget build theme but maybe for a V3 kit if there is such a demand?

Yes, that would be very possible. I could get someone to make a solid mount that is an inch shorter then extend the bracket an inch lower.
My only concern is that it might not gain anything more than a few whps. If you decide to upgrade the GT-R Turbos down the road to support then it would be worth it.

Sent from my iPhone using Tapatalk

TheAllBlueZ · 01-22-2018, 10:29 PM

So how much are you going to sell the dyi kit for? I really want to buy one.

husam2012 · 01-24-2018, 11:19 PM

Got awesome news from ihiryu!

He started installing my kit last week and just finished street tuning it today.

I'm really happy that he called me as he had great news and a great impression of how this kit feels on the street and how his install went with little to no issues.

He will be posting a thread this week hopefully regarding his install and I can't wait to see his dyno sheet

husam2012 · 01-28-2018, 06:14 PM

Quote:

Originally Posted by TheAllBlueZ

So how much are you going to sell the dyi kit for? I really want to buy one.

Unfortunately I cannot discuss that in this thread. Please contact me at my gmail if you have any questions.

Husamh1996@gmail.com

husam2012 · 01-31-2018, 04:38 PM

While I'm waiting for the inlets and gaskets to arrive, here's some off topic entertainment.

First time working on a GTR and guess what I had to do? A full engine with e85, bigger Xona turbos

It wasn't that hard as much as it was really time consuming. I wish our engine bay had that extra inch or so of space

Sent from my iPhone using Tapatalk

Jayhovah · 01-31-2018, 05:05 PM

I want to be you when I grow up.

Sent from my Nexus 6P using Tapatalk

TexasZ34 · 02-02-2018, 09:30 PM

So here's something I've been thinking about. If these turbos fit, will others stock location turbos work, I mean upgraded stock size turbos.

Sent from my SM-N950U using Tapatalk

husam2012 · 02-02-2018, 09:57 PM

Quote:

Originally Posted by Jayhovah

I want to be you when I grow up.

Sent from my Nexus 6P using Tapatalk

I'm sure you have way more experience than me but I just got lucky and stumbled on this part time job

I wish i knew how to mold that sub enclosure :O

Quote:

Originally Posted by TexasZ34

So here's something I've been thinking about. If these turbos fit, will others stock location turbos work, I mean upgraded stock size turbos.

Sent from my SM-N950U using Tapatalk

Yep, they actually do! I've tested the turbos off this GT-R I'm working on which made 1000 whp before the rebuild, and they fit fine other than needing a little more clearance on the motor mount bracket(easy fix)

Sent from my iPhone using Tapatalk

husam2012 · 02-06-2018, 08:51 PM

Been busy with work, school and life but finally about to put it back together this month.

This used engine has a hideous timing cover that is also leaking near the thermostat so I'm going to be changing it with my previous engine's cover.

Decided to polish it while I'm at it, about to be done soon hopefully

Start:

Progress halfway(20mins)

Sent from my iPhone using Tapatalk

husam2012 · 02-12-2018, 04:58 PM

Finally finished that GTR build and it was done with the final tune today. Made almost 1040whp on e85!!

I'm currently finishing up the oil/coolant lines and hopefully by Wednesday I'll have everything wrapped up in that regard and will update you guys by then.

Sent from my iPhone using Tapatalk

sirnixalot · 02-15-2018, 08:49 AM

I should have my adapters in hand next monday

Thanks again Husam

husam2012 · 02-17-2018, 10:51 AM

Quote:

Originally Posted by sirnixalot

I should have my adapters in hand next monday

Thanks again Husam

Thank you for helping me out! Hopefully you will enjoy the boost soon

Going slower than I expected again :/ just ordered all the fittings for the oil/coolant lines and they came out to be almost $200 not including lines

Finally finished the timing cover and about to install it today along with the oil pan and the engine side would be finished.

Sent from my iPhone using Tapatalk

Rusty · 02-17-2018, 03:58 PM

Looks like you painted it.

01-14-2018, 07:09 PM	#481 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	I decided to not use the GTR intercoolers this time as I found a good deal on the CJM intercooler with 3” piping. Thanks Justin! Wish me luck that it can be finished before April this time around Sent from my iPhone using Tapatalk phunk, 2011 Nismo#91, elperuano and 9 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

01-15-2018, 11:17 AM	#482 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	so just thinking on paper here If you were to remake both engine mount brackets to extend lower and then have a physically thinner engine mount. Is there enough room everywhere else that would allow a 3" intake off the turbo? I know that's getting off the budget build theme but maybe for a V3 kit if there is such a demand? Hell the z1 mounts are adjustable....hmmmmm husam2012 likes this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap Last edited by sirnixalot; 01-15-2018 at 11:23 AM.

01-22-2018, 10:29 PM	#484 (permalink)
TheAllBlueZ Base Member Join Date: Mar 2017 Location: Tracy Posts: 16 Drives: 2010 370Z Rep Power: 8	So how much are you going to sell the dyi kit for? I really want to buy one. Wonka2581, husam2012 and unijabnx like this.

01-24-2018, 11:19 PM	#485 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	Got awesome news from ihiryu! He started installing my kit last week and just finished street tuning it today. I'm really happy that he called me as he had great news and a great impression of how this kit feels on the street and how his install went with little to no issues. He will be posting a thread this week hopefully regarding his install and I can't wait to see his dyno sheet scratchdvinyl, Rusty, Hotrodz and 6 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

01-31-2018, 04:38 PM	#487 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	While I'm waiting for the inlets and gaskets to arrive, here's some off topic entertainment. First time working on a GTR and guess what I had to do? A full engine with e85, bigger Xona turbos It wasn't that hard as much as it was really time consuming. I wish our engine bay had that extra inch or so of space Sent from my iPhone using Tapatalk carlitos_370z and sirnixalot like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

02-02-2018, 09:30 PM	#489 (permalink)
TexasZ34 Base Member Join Date: Jun 2011 Location: Houston, Tx Posts: 78 Drives: 10 40TH 370Z KAV M6 Rep Power: 14	So here's something I've been thinking about. If these turbos fit, will others stock location turbos work, I mean upgraded stock size turbos. Sent from my SM-N950U using Tapatalk husam2012 likes this. __________________

02-06-2018, 08:51 PM	#491 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	Been busy with work, school and life but finally about to put it back together this month. This used engine has a hideous timing cover that is also leaking near the thermostat so I'm going to be changing it with my previous engine's cover. Decided to polish it while I'm at it, about to be done soon hopefully Start: Progress halfway(20mins) Sent from my iPhone using Tapatalk MadSciSnails and ZontheRocks like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

02-12-2018, 04:58 PM	#492 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	Finally finished that GTR build and it was done with the final tune today. Made almost 1040whp on e85!! I'm currently finishing up the oil/coolant lines and hopefully by Wednesday I'll have everything wrapped up in that regard and will update you guys by then. Sent from my iPhone using Tapatalk scratchdvinyl, 2011 Nismo#91, jae35 and 11 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

02-15-2018, 08:49 AM	#493 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	I should have my adapters in hand next monday Thanks again Husam Jayhovah and husam2012 like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

02-17-2018, 03:58 PM	#495 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,181 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Looks like you painted it. Jayhovah and husam2012 like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	1	10-16-2016 10:03 PM
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	0	08-11-2015 04:30 PM
[FOR SALE] Someone please buy my turbos!	NIZZING	Parts for sale (Private Classifieds)	3	11-12-2014 09:47 PM
EFR Turbos	frydrce	Forced Induction	34	08-30-2012 10:43 AM
somebody who knows a lot about turbos please help	kevin1985912	Forced Induction	15	10-05-2010 12:00 PM