GT-R turbos on the VQ37

natedog37 · 10-09-2017, 02:01 PM

I'm just going to throw this out there, but you could start a go fund me page. I've got $5 buck for you, lol. Honestly, what you were able to do and write about on here has been fun to watch and if it costs me a cup of coffee then I'm in. I'd like to see how this turbo and motor combo develop. I know it's a hard sell to ask for money so you can hot rod your car around, but people on here would get it. Who knows you could literally raise dozens of dollars!

Just saying'.

RadioFlyer · 10-09-2017, 02:23 PM

I think that's a great idea - and I'd go a step further and suggest that if you could put together a kit for sale that uses takeoff parts from GTRs, you could probably raise a good bit of money. You're knocking on the door of offering a mild turbo kit that uses stock GTR parts (reliability, QC), for way less than what's currently out there. You'd have to supply the manifold, downpipe, intercooler, and intake pipes. Customer sources the fuel and tuning. Just a thought...

husam2012 · 10-12-2017, 10:20 AM

Quote:

Originally Posted by natedog37

I'm just going to throw this out there, but you could start a go fund me page. I've got $5 buck for you, lol. Honestly, what you were able to do and write about on here has been fun to watch and if it costs me a cup of coffee then I'm in. I'd like to see how this turbo and motor combo develop. I know it's a hard sell to ask for money so you can hot rod your car around, but people on here would get it. Who knows you could literally raise dozens of dollars!

Just saying'.

I really appreciate the thought! Anything could help and I might consider this if my funds don't allow me to fix this car by Feb/March.

Thank you!

Quote:

Originally Posted by RadioFlyer

I think that's a great idea - and I'd go a step further and suggest that if you could put together a kit for sale that uses takeoff parts from GTRs, you could probably raise a good bit of money. You're knocking on the door of offering a mild turbo kit that uses stock GTR parts (reliability, QC), for way less than what's currently out there. You'd have to supply the manifold, downpipe, intercooler, and intake pipes. Customer sources the fuel and tuning. Just a thought...

I would love to do this but the problem is the initial cost for a single kit like that. I like the idea though especially since my friends broken VQ laying around in my backyard (Fabricate piping on it)

Currently the car is still running fine, but i'm scared of driving it because of the eventual bearing spinning out. I do have all my gauges and flex fuel wired in.

I do have some good news for you guys though! I was reading through the Ecutek guide the other day only to discover that using the GT-R map sensor on a Z makes it read 0.23 bar too high when logging it.

I finally got a boost gauge and my car makes 8.5~ PSI at around 5500 then drops to less than 7 PSI near redline!

It finally makes sense why I made 460~ WHP 375 WTQ

Jayhovah · 10-12-2017, 10:24 AM

Quote:

Originally Posted by husam2012

I really appreciate the thought! Anything could help and I might consider this if my funds don't allow me to fix this car by Feb/March.

Thank you!

I would love to do this but the problem is the initial cost for a single kit like that. I like the idea though especially since my friends broken VQ laying around in my backyard (Fabricate piping on it)

Currently the car is still running fine, but i'm scared of driving it because of the eventual bearing spinning out. I do have all my gauges and flex fuel wired in.

I do have some good news for you guys though! I was reading through the Ecutek guide the other day only to discover that using the GT-R map sensor on a Z makes it read 0.23 bar too high when logging it.

I finally got a boost gauge and my car makes 8.5~ PSI at around 5500 then drops to less than 7 PSI near redline!

It finally makes sense why I made 460~ WHP 375 WTQ

Mystery solved! I wonder why the MAP sensor reads inaccurately.

husam2012 · 10-12-2017, 10:26 AM

Quote:

Originally Posted by Jayhovah

Mystery solved! I wonder why the MAP sensor reads inaccurately.

Jayhovah · 10-12-2017, 10:33 AM

Well there you have it. Looks like its just calibrated differently.

370Stealth · 10-12-2017, 11:02 AM

So I had the pleasure of meeting Husam in person since we live in the same state and couple minutes away and I just have to say, what he is doing with this car and the experiments, it's coming out really nice!

RadioFlyer · 10-12-2017, 05:49 PM

Quote:

Originally Posted by husam2012

SNIP...
I would love to do this but the problem is the initial cost for a single kit like that. I like the idea though especially since my friends broken VQ laying around in my backyard (Fabricate piping on it) ...SNIP

^That's what you crowdfund for! You already have the kit, just make jigs for all the piping, and crowdfund the initial investment for the first run of parts. It could pretty much run like a presale/group buy. Once you have a couple sales under your belt, it can fund itself!

husam2012 · 10-21-2017, 11:51 PM

Quote:

Originally Posted by RadioFlyer

^That's what you crowdfund for! You already have the kit, just make jigs for all the piping, and crowdfund the initial investment for the first run of parts. It could pretty much run like a presale/group buy. Once you have a couple sales under your belt, it can fund itself!

Thank you all for the suggestion. I have started a gofund me page just as suggested in hopes that it will help me start selling these kits for an affordable price.

https://www.gofundme.com/help-me-fin...gtr-conversion

Thank you everyone for everything along this great journey. I'm currently saving up for a used engine so I can drop my subframe and work on making a jig for inlets and downpipes to be sold with the adapter kits. I'm hoping to have enough saved up for a used engine by February so I can have the pieces ready to ship before summer.

RadioFlyer · 10-22-2017, 02:46 AM

Awesome... funded! Keep the updates coming! Good luck!

EliteXpress · 10-22-2017, 09:41 PM

Sent you a lil token of appreciation, hope you finalize this project and help put a lot more Boosted Z'$ on the streets!

husam2012 · 10-23-2017, 12:46 PM

Thank you everyone for your help! It's really appreciated and shows how good this community is.

I will be updating everyone as soon as I get any news

Thanks again!

natedog37 · 10-23-2017, 05:01 PM

Boom! $5 bucks as promised. Come on everyone, it's quick and easy to donate. Seriously, I hope you've enjoyed reading along as much as I have, if you have, donate so we can see it get completed and tested (flogged) properly.

husam2012 · 10-26-2017, 08:08 PM

Thank you! I really appreciate the help from you guys

Here’s a small update. Finally got a revised steering rack shim/spacer to make the oem braces fit without modification!

Sent from my iPhone using Tapatalk

husam2012 · 10-27-2017, 07:59 PM

Mounted it on the car. The steering shaft clears perfectly while only spacing the rack down 1/2 an inch! GTM's earlier kits spaced it out by a whole inch.

Also, here's some pictures of how the turbos look from the underside with the downpipes.

Don't mind the steering shaft scratches. That was before I added any spacers at all.

Budget doesn't afford me anything more than the Megan Y pipe and a open dump past the diff but it sounds perfect!

My nismo exhaust is for sale if anyone wants it!!

Sent from my iPhone using Tapatalk

10-09-2017, 02:01 PM	#421 (permalink)
natedog37 Base Member Join Date: Apr 2012 Location: PacNW Posts: 12 Drives: Workin' on it. Rep Power: 13	I'm just going to throw this out there, but you could start a go fund me page. I've got $5 buck for you, lol. Honestly, what you were able to do and write about on here has been fun to watch and if it costs me a cup of coffee then I'm in. I'd like to see how this turbo and motor combo develop. I know it's a hard sell to ask for money so you can hot rod your car around, but people on here would get it. Who knows you could literally raise dozens of dollars! Just saying'. Jayhovah, BobbyLight and adam4g63 like this.

10-09-2017, 02:23 PM	#422 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 40	I think that's a great idea - and I'd go a step further and suggest that if you could put together a kit for sale that uses takeoff parts from GTRs, you could probably raise a good bit of money. You're knocking on the door of offering a mild turbo kit that uses stock GTR parts (reliability, QC), for way less than what's currently out there. You'd have to supply the manifold, downpipe, intercooler, and intake pipes. Customer sources the fuel and tuning. Just a thought... Jayhovah likes this.

10-12-2017, 11:02 AM	#427 (permalink)
370Stealth Base Member Join Date: Aug 2017 Location: Michigan Posts: 100 Drives: 09 Nissan 370z BK AT Rep Power: 8	So I had the pleasure of meeting Husam in person since we live in the same state and couple minutes away and I just have to say, what he is doing with this car and the experiments, it's coming out really nice! husam2012 likes this.

10-22-2017, 02:46 AM	#430 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 40	Awesome... funded! Keep the updates coming! Good luck! Jayhovah, husam2012, Z Runner and 1 others like this.

10-22-2017, 09:41 PM	#431 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 11	Sent you a lil token of appreciation, hope you finalize this project and help put a lot more Boosted Z'$ on the streets! Jayhovah, husam2012, Z Runner and 1 others like this. __________________ Boosted Performance Kit Built By JMS Racing 700whp. IG: @EliteXpress370z

10-23-2017, 12:46 PM	#432 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	Thank you everyone for your help! It's really appreciated and shows how good this community is. I will be updating everyone as soon as I get any news Thanks again! Jayhovah and Z Runner like this.

10-23-2017, 05:01 PM	#433 (permalink)
natedog37 Base Member Join Date: Apr 2012 Location: PacNW Posts: 12 Drives: Workin' on it. Rep Power: 13	Boom! $5 bucks as promised. Come on everyone, it's quick and easy to donate. Seriously, I hope you've enjoyed reading along as much as I have, if you have, donate so we can see it get completed and tested (flogged) properly. Jayhovah, husam2012 and Z Runner like this.

10-26-2017, 08:08 PM	#434 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	Thank you! I really appreciate the help from you guys Here’s a small update. Finally got a revised steering rack shim/spacer to make the oem braces fit without modification! Sent from my iPhone using Tapatalk Jayhovah, carlitos_370z and Z Runner like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

10-27-2017, 07:59 PM	#435 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	GT-R turbos on the VQ37 Mounted it on the car. The steering shaft clears perfectly while only spacing the rack down 1/2 an inch! GTM's earlier kits spaced it out by a whole inch. Also, here's some pictures of how the turbos look from the underside with the downpipes. Don't mind the steering shaft scratches. That was before I added any spacers at all. Budget doesn't afford me anything more than the Megan Y pipe and a open dump past the diff but it sounds perfect! My nismo exhaust is for sale if anyone wants it!! Sent from my iPhone using Tapatalk carlitos_370z and Z Runner like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning Last edited by husam2012; 10-27-2017 at 09:16 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	1	10-16-2016 10:03 PM
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	0	08-11-2015 04:30 PM
[FOR SALE] Someone please buy my turbos!	NIZZING	Parts for sale (Private Classifieds)	3	11-12-2014 09:47 PM
EFR Turbos	frydrce	Forced Induction	34	08-30-2012 10:43 AM
somebody who knows a lot about turbos please help	kevin1985912	Forced Induction	15	10-05-2010 12:00 PM