GT-R turbos on the VQ37

Jayhovah · 06-15-2017, 12:58 PM

Sleeper.

B&W_Evader · 06-15-2017, 05:59 PM

Great job putting this together.

So few interesting builds going on right now.
I think you're making believers out of your skeptics!

Rusty · 06-15-2017, 09:21 PM

Quote:

Originally Posted by husam2012

Downpipes finished this morning! I started it up and filled it up with coolant and no leaks so far. I honestly expected it to be louder but it's pretty quiet! Ordering the inlet filters tonight and hopefully will be getting my base tune soon.

Sorry for the snapchat video. I was too lazy to record another one.
https://youtu.be/NWvPqZy2AaA

The turbo's knock a lot of the dB's down.

JTM88 · 06-16-2017, 03:18 PM

Quote:

Originally Posted by Rusty

The turbo's knock a lot of the dB's down.

Truth, I remember when I started my focus ST with just the down pipe it was super quiet.

Sent from my iPhone using Tapatalk

husam2012 · 06-17-2017, 05:44 PM

Thank you guys! I will be sticking with this exhaust for a bit until I can afford doing a GT-R style exhaust.

I have the whole driver side wrapped up except connecting the BOVs to the manifold.
I was wondering if it's possible to just tap the brake booster hose instead of having to drill the manifold? If anybody knows let me know please!

Only thing left aside from BOVs/installing the fuel pump is this. I just need to connect them together. I think I'm too lazy to figure it out slowly so I'll just have the shop do it Monday for me.

Sent from my iPhone using Tapatalk

phunk · 06-17-2017, 06:03 PM

There is a vacuum port for the EVAP system right behind each throttle body flange on the intake manifold. On each side is a short 90 degree vacuum hose connecting the EVAP pipe to just behind the throttle flange. I remove the 90 degree hose and install a T fitting with a couple 1" long sections of hose. The straight run leg of the T left open, I send to each BOV. Years of testing, works perfect.

husam2012 · 06-18-2017, 10:06 AM

Quote:

Originally Posted by phunk

There is a vacuum port for the EVAP system right behind each throttle body flange on the intake manifold. On each side is a short 90 degree vacuum hose connecting the EVAP pipe to just behind the throttle flange. I remove the 90 degree hose and install a T fitting with a couple 1" long sections of hose. The straight run leg of the T left open, I send to each BOV. Years of testing, works perfect.

Thank you so much! I ordered the T fittings and they should be here Monday!

Only major thing to do is to install the 340 fuel pump and the wiring kit bought from you

SgtGoldy · 06-19-2017, 08:10 AM

Quote:

Originally Posted by phunk

There is a vacuum port for the EVAP system right behind each throttle body flange on the intake manifold. On each side is a short 90 degree vacuum hose connecting the EVAP pipe to just behind the throttle flange. I remove the 90 degree hose and install a T fitting with a couple 1" long sections of hose. The straight run leg of the T left open, I send to each BOV. Years of testing, works perfect.

God, I love this forum

. People here are different, they want to see each other succeed & will offer great information or help whenever they can.

husam2012 · 06-19-2017, 05:11 PM

Quote:

Originally Posted by SgtGoldy

God, I love this forum

. People here are different, they want to see each other succeed & will offer great information or help whenever they can.

I agree! Thank you phunk for this idea as it saved me a lot time

Still waiting for the tuner. He tunes GTRs and his license didn't work for my Z so he has to buy the 370z license. Hoping that happens ASAP so I can drive the darn car!

Sent from my iPhone using Tapatalk

husam2012 · 06-19-2017, 06:51 PM

I just wanted to post this separately. I've been struggling with the steering rack spacers as doing it like GTM makes it so one of the downpipe bolts wouldn't fit due to the tiny clearance left.

I've discovered that Fast Intention's kit also uses rack spacers, but they are at an angle so there's more clearance for the turbos. Obviously they aren't willing to just give me these spacers so i have to figure it out for myself.

The problem is, the rack doesn't like being angled at all. (It either going on straight or angled the wrong way)

I could technically finish using the regular flat spacers but then i would have one missing bolt on the driver downpipe and i don't like doing things halfassed.

Does anybody have any ideas? Thanks guys.

husam2012 · 06-22-2017, 12:26 PM

Been busy with life but i'm almost done with the fuel pump. Should be finished tonight along with the inlets.

Only thing left is to find a permanent solution to the steering rack (Fast intentions gave me the basic idea which actually solves my problem) but they weren't willing to give any details or sell it for me.. So i will have to make it myself. I could actually tune the car as is since the downpipe doesn't leak when it's missing 1 bolt but i don't want to leave it like that.

Another exhaust video for you guys! The tone actually changed somehow and now i love how it sounds.

Jayhovah · 06-22-2017, 12:42 PM

Getting close man!!! Bummer that FI wouldn't sell you their spacers...
I agree it's a good idea to to make sure you get three bolts on the downpipe... don't want it to start leaking when the motor is rocking and rolling.

Is the spacer something you can have machined?

SgtGoldy · 06-22-2017, 01:24 PM

Quote:

Originally Posted by husam2012

Another exhaust video for you guys! The tone actually changed somehow and now i love how it sounds.

"This video does not exist!" - YouTube

Jayhovah · 06-22-2017, 01:33 PM

Fixed it for ya.

husam2012 · 06-22-2017, 01:39 PM

Quote:

Originally Posted by Jayhovah

Fixed it for ya.

Thank you! For some reason it shows on my phone but not on a computer

Sent from my iPhone using Tapatalk

06-15-2017, 05:59 PM	#272 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 387	Great job putting this together. So few interesting builds going on right now. I think you're making believers out of your skeptics! YzGyz likes this. __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

06-17-2017, 05:44 PM	#275 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 551 Drives: 370Z Nismo Rep Power: 9470	Thank you guys! I will be sticking with this exhaust for a bit until I can afford doing a GT-R style exhaust. I have the whole driver side wrapped up except connecting the BOVs to the manifold. I was wondering if it's possible to just tap the brake booster hose instead of having to drill the manifold? If anybody knows let me know please! Only thing left aside from BOVs/installing the fuel pump is this. I just need to connect them together. I think I'm too lazy to figure it out slowly so I'll just have the shop do it Monday for me. Sent from my iPhone using Tapatalk Jayhovah and carlitos_370z like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

06-17-2017, 06:03 PM	#276 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974724	There is a vacuum port for the EVAP system right behind each throttle body flange on the intake manifold. On each side is a short 90 degree vacuum hose connecting the EVAP pipe to just behind the throttle flange. I remove the 90 degree hose and install a T fitting with a couple 1" long sections of hose. The straight run leg of the T left open, I send to each BOV. Years of testing, works perfect. SgtGoldy, Trips, Jayhovah and 1 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

06-19-2017, 06:51 PM	#280 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 551 Drives: 370Z Nismo Rep Power: 9470	GT-R turbos on the VQ37 I just wanted to post this separately. I've been struggling with the steering rack spacers as doing it like GTM makes it so one of the downpipe bolts wouldn't fit due to the tiny clearance left. I've discovered that Fast Intention's kit also uses rack spacers, but they are at an angle so there's more clearance for the turbos. Obviously they aren't willing to just give me these spacers so i have to figure it out for myself. The problem is, the rack doesn't like being angled at all. (It either going on straight or angled the wrong way) I could technically finish using the regular flat spacers but then i would have one missing bolt on the driver downpipe and i don't like doing things halfassed. Does anybody have any ideas? Thanks guys. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning Last edited by husam2012; 06-19-2017 at 06:55 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	1	10-16-2016 09:03 PM
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	0	08-11-2015 03:30 PM
[FOR SALE] Someone please buy my turbos!	NIZZING	Parts for sale (Private Classifieds)	3	11-12-2014 08:47 PM
EFR Turbos	frydrce	Forced Induction	34	08-30-2012 09:43 AM
somebody who knows a lot about turbos please help	kevin1985912	Forced Induction	15	10-05-2010 11:00 AM

06-22-2017, 12:26 PM	#281 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 551 Drives: 370Z Nismo Rep Power: 9470	Been busy with life but i'm almost done with the fuel pump. Should be finished tonight along with the inlets. Only thing left is to find a permanent solution to the steering rack (Fast intentions gave me the basic idea which actually solves my problem) but they weren't willing to give any details or sell it for me.. So i will have to make it myself. I could actually tune the car as is since the downpipe doesn't leak when it's missing 1 bolt but i don't want to leave it like that. Another exhaust video for you guys! The tone actually changed somehow and now i love how it sounds.