GT-R turbos on the VQ37

husam2012

Yeah i agree but it's been one tiny problem after another haha so it has delayed me a lot.

I finally got it back on today and hoping to have a helping hand so i can drop the engine back in tonight.




Sent from my iPhone using Tapatalk

__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP)
Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58)
BTWTuning

BobbyLight

This is badass! seriously impressed.

Nixin

Looks awesome husam. A bit surprised you didn't drop the turbos into the new Camaro, seeing as you are a huge fan of the Camaro

adam4g63

My question is, why didn't Nissan do this? Build looks great, can't wait to see a dyno sheet!

Sent from my SAMSUNG-SM-N910A using Tapatalk

husam2012

Yeah unfortunately i couldn't afford the 1LE so i had to settle with spending 1/2 of it's cost including the turbos


Sent from my iPhone using Tapatalk

__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP)
Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58)
BTWTuning

JTM88

My guess is they didn't want to undercut the GTR.

__________________

Stright_Drop

I sometimes daydream that maybe a very special person at Nissan with enough pull had a 370z made like this

husam2012

Both sides in. Fits perfectly including clearance to chassis, steering coupler and shaft, and even the stock fuel heat shield!
Working on it at the moment so just this for now


Sent from my iPhone using Tapatalk

__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP)
Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58)
BTWTuning

husam2012

I must of jinxed myself. The steering shaft has zero clearance what so ever if i tilt the engine back a little (still not sure how to make it at the right angle without attaching the trans and bolting everything)

Anybody has any ideas? It's hitting the heat-shield bolts at the bottom and even grinding them a little bit doesn't help.

Unless i'm tilting the engine way too far back, then it might clear if i put it at the right angle. Does anyone have pictures of their engine mounted without the intake manifold in place? That would help me visualize it a bit.



These are pictures from the german shop who has built a few 370Z's using gtr turbos. It almost looks like their steering rack is in a different location?




Any ideas/ help would be really appreciated as I'm really out of ideas at the moment :/


Sent from my iPhone using Tapatalk

__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP)
Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58)
BTWTuning

Jayhovah

Yikes I was worried for you about that steering shaft coupler.
Gamma kit does space the engine up a little bit, no more than you could with the Z1 mounts though. I think the older GTM kits added some kind of extension or something for the steering shaft (Chuck?)... I think the FI kit may adjust the position of the steering rack but not sure about this either (Hotrodz?).

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

husam2012

It looks like the first versions of the GTM kits had a similar issue. I found something about it but no details at all on how i would add the extension or move it?



Sent from my iPhone using Tapatalk

__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP)
Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58)
BTWTuning

Jayhovah

Think some of the OG's with GTM kits should be able to chime in and help you out... You may also consider posting a thread in the FI subforum asking for pictures of the steering shaft modification for the GTM v1 kit ...

While you're at it, you might have a mod move this thread there =) Could garner a little more attention and support from the rest of the FI guys who might not wade around in the general engine section... Good luck man, you'll figure something out. Too skilled!

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

husam2012

Thank you again for your support! I was happy today and was thinking i'd have the trans and everything back but there's always something waiting for me :/

Hopefully somebody chimes in tomorrow


Sent from my iPhone using Tapatalk

__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP)
Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58)
BTWTuning

phunk

Id install the trans and get the engine angle sitting right. Otherwise you are sort of working blind.

__________________

husam2012

I worked on it for about 5 hours today. The darn thing wouldn't slide in. I did use the allignment tool again to check and it fits perfectly so I guess I just need to try it again tonight. Any tricks you use to slide it back in?


Sent from my iPhone using Tapatalk

__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP)
Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58)
BTWTuning