![]() |
I don't think you'll have issues it's the same as a TT kit (fast intentions, GTM etc) besides the fact you'll have to do the research and development for the
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
![]() |
#1 (permalink) |
Enthusiast Member
Join Date: Dec 2014
Location: Nashville
Posts: 301
Drives: Nissan 370Z Sport
Rep Power: 11 ![]() |
![]()
I don't think you'll have issues it's the same as a TT kit (fast intentions, GTM etc) besides the fact you'll have to do the research and development for the kit yourself which will be challenging. If you know what your doing then go for it! The 370z wasn't turbo'd from the factory obviously, but that doesn't mean it can't be turbo'd without making it unrealiable. The compression ratio for the vq37 is a bit high for boost, but if you get a good fuel setup, maf location in the right place, and a large intercooler you will be just as reliable as any TT kit on the market. Just don't go over board with the power. I've seen videos of the vq37 making 700whp on e85 (don't even think you could make that much power with GTR turbos) but for a daily driver just keep power levels on the lower end. I'll be keeping a eye on this one!
Good Luck ![]()
__________________
Stillen G3, z1 Intake Manifold, Stillen Headers, Z1 HFC's, Stillen Catback. 330whp 267 ft- lbs tuned at Z1 motorsports. Last edited by Wilson2608; 01-24-2017 at 12:16 PM. |
![]() |
![]() |
![]() |
#2 (permalink) | |||
Track Member
Join Date: Mar 2015
Location: Michigan
Posts: 551
Drives: 370Z Nismo
Rep Power: 9470 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Quote:
Quote:
I was wondering about this.. Do you guys think there would be any interest in a group buy for the adapters when i get them perfected to fit without any other modification? I have the intercooler and piping figured out already, just not sure how to do the down pipes yet! If anybody has any ideas, let me know! |
|||
![]() |
![]() |
![]() |
#3 (permalink) | ||
Premium Member
![]() Join Date: May 2013
Location: St. Pete, FL
Posts: 3,848
Drives: 520whp Fire Breather
Rep Power: 86951 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Think just the adapters would get done interest as well. Sent from my Nexus 6P using Tapatalk
__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted Quote:
|
||
![]() |
![]() |
![]() |
#4 (permalink) | |
Track Member
Join Date: Mar 2015
Location: Michigan
Posts: 551
Drives: 370Z Nismo
Rep Power: 9470 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Yeah that would be really awesome if I could find a local source to supply everything.. I will be contacting a few shops to see if they can do it. Anyways, I got the motor out yesterday from the top! I didn't want to drain the AC so I just lifted it without the transmission. One thing that I feared is I have to make a driver side slim motor mount bracket, anybody know a company who makes them? I contacted Gamma but they are very pricey for just a little bracket ![]() If anybody knows how to make a slim driver side mount bracket or who sells it, please contact me asap! Sent from my iPhone using Tapatalk
__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning |
|
![]() |
![]() |
![]() |
#5 (permalink) | ||
Premium Member
![]() Join Date: May 2013
Location: St. Pete, FL
Posts: 3,848
Drives: 520whp Fire Breather
Rep Power: 86951 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Sent from my Nexus 6P using Tapatalk
__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted Quote:
|
||
![]() |
![]() |
![]() |
#6 (permalink) | |
Track Member
Join Date: Mar 2015
Location: Michigan
Posts: 551
Drives: 370Z Nismo
Rep Power: 9470 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Yeah unfortunately that's not going to help. I need clearance at the bracket which is exactly what the GTM v2 kit has. They have been very slow at replying back and it looks like I have to have it made with them as it's the fastest way (if they reply lol) An update to see if anybody has any ideas for another vendor that sells the driver side bracket! Also more pictures! ![]() ![]() ![]() Sent from my iPhone using Tapatalk
__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning Last edited by husam2012; 03-18-2017 at 01:13 AM. |
|
![]() |
![]() |
![]() |
#7 (permalink) |
Enthusiast Member
Join Date: Dec 2014
Location: Nashville
Posts: 301
Drives: Nissan 370Z Sport
Rep Power: 11 ![]() |
![]()
I would be interested in this if you were able to find a supplier and offer a kit. So far so good! Keep us updated
![]()
__________________
Stillen G3, z1 Intake Manifold, Stillen Headers, Z1 HFC's, Stillen Catback. 330whp 267 ft- lbs tuned at Z1 motorsports. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[FOR SALE] Turbos | NIZZING | Parts for sale (Private Classifieds) | 1 | 10-16-2016 09:03 PM |
[FOR SALE] Turbos | NIZZING | Parts for sale (Private Classifieds) | 0 | 08-11-2015 03:30 PM |
[FOR SALE] Someone please buy my turbos! | NIZZING | Parts for sale (Private Classifieds) | 3 | 11-12-2014 08:47 PM |
EFR Turbos | frydrce | Forced Induction | 34 | 08-30-2012 09:43 AM |
somebody who knows a lot about turbos please help | kevin1985912 | Forced Induction | 15 | 10-05-2010 11:00 AM |