I was searching all weekend could not fined any manual just build post on forums. If some one have a install manual link please share.
So filter relocation will be necessary to add another plate for the oil lines?

Contact turbo kit manufacturers, they can provide the install manuals.

AAM does provide their TT install manual as a PDF on their website. Simply googling 350Z twin turbo manuals should bring up a lot of results.


Finally got the trans out! https://uploads.tapatalk-cdn.com/201...c9161d13e4.jpg


Sent from my iPhone using Tapatalk

Don't forget to replace that POS pilot bushing with a pilot bearing. Should be a Nismo part but I'm sure someone on here has the NSK#.

GT-R turbos on the VQ37
 

I'm hoping it's included with the clutch/flywheel package otherwise I'd be really pissed.

Finished installing the ZSpeed CMAK.
I was wondering if it's normal to have it make noise as it moves back and forth? I greased everything and it still doesn't feel smooth.

The included guide isn't the best and the pictures are confusing considering they have an older version showing on there.

https://uploads.tapatalk-cdn.com/201...c5b1a3be06.jpg


Sent from my iPhone using Tapatalk

GT-R turbos on the VQ37
 

"reserve"

Sent from my iPhone using Tapatalk

Looking good, hurry test fit it in the bay so i can have peace of mined ��

This is really cool...i rep u sir...

Impressive follow through. Not going to lie, this was another "ya right" thread for me. Cool to see you sticking to it.

Thanks! Really appreciate the positive comments when everybody doubted me in the beggining!

Although, I wouldn't say it's easy that's for sure. I spend many hours trying to figure out the adapters and their angle and whether it would still clear everything etc. I'm hoping to finish asap as I really hate driving beaters

https://uploads.tapatalk-cdn.com/201...92078e8bf7.jpg

Still thinking of changing the angle. Currently both compressor inlets fit from the GTR but just barely on the driver side.


Sent from my iPhone using Tapatalk

Sweet

Very good progress. all your long hours will pay off, I'm sure about it.
Cant wait to see when it finish.

I test fitted GTR intercooler and upper pipes they fit qite well.
Fuse box have to be moved to the fender side a bit.

http://www.the370z.com/members/z-run...1-img-2708.jpg

http://www.the370z.com/members/z-run...2-img-2710.jpg

Could not rotate it sorry just rotate your monitor :)

GT-R turbos on the VQ37
 

Small update. Finally figured out how to cut the oil lines and finished installing them. Water lines next as I just got the turbo AN fittings.

Also, the clutch/flywheel/CSC is done so I don't have to worry about that for a while hopefully! Stage 3 Zspeed package.

https://uploads.tapatalk-cdn.com/201...31bae9010f.jpghttps://uploads.tapatalk-cdn.com/201...e6d98148b6.jpghttps://uploads.tapatalk-cdn.com/201...fbf8d5ef9f.jpg


Sent from my iPhone using Tapatalk