Battery Cable Disconnecting.

Chuck33079 · 11-30-2016, 08:50 AM

Quote:

Originally Posted by madeinjapan

still doesnt clearly say???

How clear do you need it to be? You must have gotten lost here in the tech section. Weren't you banned the last time you tried to pretend you know anything?

madeinjapan · 11-30-2016, 09:15 AM

Quote:

Originally Posted by Chuck33079

How clear do you need it to be? You must have gotten lost here in the tech section. Weren't you banned the last time you tried to pretend you know anything?

i was jus trying to help but thanks chuck once again to make sure everyone knows you are the head honcho around here in tech and only you can answer questions and solve problems we are all dumb dumbs

Chuck33079 · 11-30-2016, 09:37 AM

Quote:

Originally Posted by madeinjapan

i was jus trying to help but thanks chuck once again to make sure everyone knows you are the head honcho around here in tech and only you can answer questions and solve problems we are all dumb dumbs

Not everybody. Just you. Plenty of people here contribute loads of good information. It's the best part of this community. Unfortunately, we get turds in the punchbowl like you who only lower the average intelligence around here. I'm not the only one who thinks you should be permanantly banned, at least from the tech section. Here's a tip - if you don't know the answer, don't post one.

barncobob · 11-30-2016, 01:54 PM

tuff crownd tonite

JARblue · 11-30-2016, 02:19 PM

Quote:

Originally Posted by madeinjapan

he didnt really say if the post was loose itself or the cable in the crimp?

Did you even read the thread title?

And he never said anything about the "post".

Quote:

Originally Posted by madeinjapan

i was jus trying to help but thanks chuck once again to make sure everyone knows you are the head honcho around here in tech and only you can answer questions and solve problems we are all dumb dumbs

madeinjapan · 12-01-2016, 08:13 AM

Quote:

Originally Posted by JARblue

Did you even read the thread title?

And he never said anything about the "post".

and here comes jar to piggyback chuck

its so routine its scary

Chuck33079 · 12-01-2016, 08:21 AM

Quote:

Originally Posted by madeinjapan

and here comes jar to piggyback chuck

its so routine its scary

Is it so unthinkable that more than one person here thinks you're a ******* moron? Here's a hint - it's not just jar and I. The list is really long. But most of us would let your unique brand of idiocy slide if you would stay the **** out of the tech section. You don't know ****, and you give people bad advice. I'm pretty sure you got a two week vacation from this site because of you pretending to know tech stuff and giving bad info.

JARblue · 12-01-2016, 08:57 AM

Quote:

Originally Posted by madeinjapan

its so routine its scary

And so is your bullshit

And why do you "like" posts about your idiocy?

Chuck and I aren't the only ones. Most people just put you on their ignore list so they don't even see the crap you post. But you post such ridiculous garbage so often that I cannot, in good conscience, hold my tongue. Others who have not encountered your nonsensical posts need to know that reading your posts is a waste of time.

Ghostvette · 12-01-2016, 09:40 AM

Methinks this is a prime thread for IBTL....

In my experience, while lead caps that slide over the battery posts are a good temporary solution, the best long term solution is to replace the cable ends or the cables themselves. Properly maintained cable ends will tighten up properly and won't require shimming (or installation of copper pipe, screws or whatever jury-rigging people do). I've never had to install some kind of shim to make the battery cable terminal tighten on the post of the battery.

madeinjapan.... like I've said before, there is good reason you are on peoples' iggy list. How do you get to be mid 50s and act like you have no 'learnin' at all? Insulting people that have demonstrated proficiency in automotive repair is just plain ignorant.....

stansens · 12-01-2016, 08:16 PM

Various nissan cars I've worked non readily accept battery post shims which effectively makes the posts a little thicker thereby allowing the cable terminals to tighten up better. As always clean terminals and posts to a bright and shiny condition and use some anti corosion grease. $5.00 and 20 minutes should alleviate the issue plus it's cheaper than new terminals and much easier. Good luck.

11-30-2016, 01:54 PM	#19 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 590	tuff crownd tonite madeinjapan likes this.

12-01-2016, 09:40 AM	#24 (permalink)
Ghostvette A True Z Fanatic Join Date: Aug 2013 Location: Shawnee KS Posts: 5,698 Drives: 15 Magma Red 6MT Rep Power: 2684377	Methinks this is a prime thread for IBTL.... In my experience, while lead caps that slide over the battery posts are a good temporary solution, the best long term solution is to replace the cable ends or the cables themselves. Properly maintained cable ends will tighten up properly and won't require shimming (or installation of copper pipe, screws or whatever jury-rigging people do). I've never had to install some kind of shim to make the battery cable terminal tighten on the post of the battery. madeinjapan.... like I've said before, there is good reason you are on peoples' iggy list. How do you get to be mid 50s and act like you have no 'learnin' at all? Insulting people that have demonstrated proficiency in automotive repair is just plain ignorant..... TreeSemdyZee and madeinjapan like this. __________________ 2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Moroso battery box W/cable kit	Vrg37s	Parts for sale (Private Classifieds)	4	11-04-2014 01:21 PM
Disconnecting battery negative post to ...	cobra	Engine & Drivetrain	23	05-01-2014 12:16 PM
Battery to amp power cable wire routing question	Pat C.	Audio & Video	5	03-10-2012 10:17 PM
Disconnecting battery	billydsz	Audio & Video	13	08-26-2010 11:25 PM
Disconnecting my Amp safely?	flashburn	Audio & Video	6	08-15-2010 01:26 PM

12-01-2016, 08:16 PM	#25 (permalink)
stansens Base Member Join Date: Nov 2015 Location: toronto, canada Posts: 144 Drives: 2016, 370z Rep Power: 193	Various nissan cars I've worked non readily accept battery post shims which effectively makes the posts a little thicker thereby allowing the cable terminals to tighten up better. As always clean terminals and posts to a bright and shiny condition and use some anti corosion grease. $5.00 and 20 minutes should alleviate the issue plus it's cheaper than new terminals and much easier. Good luck.