ARC Combo tank - braided hose & clamps

NorthStyle · 11-05-2016, 12:24 PM

Just an update:

I received the end clamps/covers and test fitted them.

As one can see, the -12AN on the right fits over the ARC silicone hoses to include the "hump" in the inlets/outlets of the tank. However, because of the size they rest against each other whereas the pictures look like there is a bit of wiggle room between each clamp/hose.

On the other hand, the -10AN on the left are too small to fit over the humps, only covering <5mm of the inlet/outlet. Unless the owners drilled out the openings of the clamps to fit, these wouldn't work.

I contacted the owner of the first picture (RJM strut brace) and he said he'd get back to me but that was earlier in the week and I've yet to receive a reply. I'm going to go ahead and order a small piece of the -10AN and -12AN hoses and test how they fit. That should be the final indicator on whether the -10AN should be drilled or to just use the -12AN.

NorthStyle · 11-12-2016, 12:08 PM

Last update:

I received the -12/-10AN hoses and was able to test fit them. The -12AN fit over it, however as I mentioned before, with the hoses and clamps there is some contact between the pairs with the clamps/hoses installed; nothing serious, but still present. The -10AN, on the other hand, would require more work than necessary to included physically forcing it over the inlet/outlet to work.

Final result:
For anyone interested in using braided hoses/clamps with your ARC combo tank, you'll need the following parts:
-12AN hose clamps (8ct)
-12AN braided nylon/stainless steel hose pieces
*ARC tanks come included with 2x 16.5" and 2x 20.5" silicone hoses. I ordered 10ft so I can route it whichever way looks best. (make sure the hose is rated for oil or better)

Hope this helps and I'll post up pics whenever I have it all installed.

Spstone · 12-08-2016, 05:29 PM

thanks for the write up. you just saved me a lot of head ache

azza12311 · 12-08-2016, 05:57 PM

love it man. I got mine but no Z

. i think i would go the black and gold. sub to see the finish mate!!.

azza12311 · 12-08-2016, 06:00 PM

also if you jdm ninja runs out of stock. check out RHD japan

NorthStyle · 12-08-2016, 08:08 PM

Quote:

Originally Posted by Spstone

thanks for the write up. you just saved me a lot of head ache

Actually, I was speaking with one of the guys in the builds section who informed me that, if you cut off those humps, you can run the -10AN hose/clamp setup.

Quote:

Originally Posted by azza12311

also if you jdm ninja runs out of stock. check out RHD japan

Luckily I have friends in Japan so I'm able to get by without middle-men but thanks for the heads up!

Spstone · 12-28-2016, 06:47 PM

Any one know what size the little lines for the cooling system are?

11-05-2016, 12:24 PM	#16 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,265 Drives: 2011 370Z Nismo Rep Power: 24277	Just an update: I received the end clamps/covers and test fitted them. As one can see, the -12AN on the right fits over the ARC silicone hoses to include the "hump" in the inlets/outlets of the tank. However, because of the size they rest against each other whereas the pictures look like there is a bit of wiggle room between each clamp/hose. On the other hand, the -10AN on the left are too small to fit over the humps, only covering <5mm of the inlet/outlet. Unless the owners drilled out the openings of the clamps to fit, these wouldn't work. I contacted the owner of the first picture (RJM strut brace) and he said he'd get back to me but that was earlier in the week and I've yet to receive a reply. I'm going to go ahead and order a small piece of the -10AN and -12AN hoses and test how they fit. That should be the final indicator on whether the -10AN should be drilled or to just use the -12AN. JARblue likes this.

11-12-2016, 12:08 PM	#17 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,265 Drives: 2011 370Z Nismo Rep Power: 24277	Last update: I received the -12/-10AN hoses and was able to test fit them. The -12AN fit over it, however as I mentioned before, with the hoses and clamps there is some contact between the pairs with the clamps/hoses installed; nothing serious, but still present. The -10AN, on the other hand, would require more work than necessary to included physically forcing it over the inlet/outlet to work. Final result: For anyone interested in using braided hoses/clamps with your ARC combo tank, you'll need the following parts: -12AN hose clamps (8ct) -12AN braided nylon/stainless steel hose pieces *ARC tanks come included with 2x 16.5" and 2x 20.5" silicone hoses. I ordered 10ft so I can route it whichever way looks best. (make sure the hose is rated for oil or better) Hope this helps and I'll post up pics whenever I have it all installed. Presto, JARblue, Morfiy and 2 others like this.

12-08-2016, 06:00 PM	#20 (permalink)
azza12311 Base Member Join Date: Sep 2015 Location: australia Posts: 153 Drives: nissan 370z ,r34 Rep Power: 10	also if you jdm ninja runs out of stock. check out RHD japan JJ's370z likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ARC Combo Tank	Spstone	Engine & Drivetrain	1	06-19-2016 08:16 PM
[FOR SALE] OEM parts: radiator hose, coolant tank, windshield washer tank, fuel pump, etc.	98intrigue	Parts for sale (Private Classifieds)	19	02-21-2014 02:40 PM
AN fittings / Hose Ends, Steel & Nylon Braided Hose @ JBtuned.com	JBtuned	Drivetrain/Engine	1	04-19-2013 12:27 AM
Coolant overflow tank & lower radiator hose	98intrigue	Wanted	2	02-28-2012 10:23 PM

12-08-2016, 05:29 PM	#18 (permalink)
Spstone Enthusiast Member Join Date: Aug 2015 Location: Wilmington, nc Posts: 354 Drives: 14 370Z Nismo 6MT PW Rep Power: 10	thanks for the write up. you just saved me a lot of head ache

12-08-2016, 05:57 PM	#19 (permalink)
azza12311 Base Member Join Date: Sep 2015 Location: australia Posts: 153 Drives: nissan 370z ,r34 Rep Power: 10	love it man. I got mine but no Z . i think i would go the black and gold. sub to see the finish mate!!.

12-28-2016, 06:47 PM	#22 (permalink)
Spstone Enthusiast Member Join Date: Aug 2015 Location: Wilmington, nc Posts: 354 Drives: 14 370Z Nismo 6MT PW Rep Power: 10	Any one know what size the little lines for the cooling system are?